PDA

View Full Version : blue swirl logo


werejag
January 14th, 2009, 03:39
im looking for the little logo off the top of a eu/uk dreamcast.

someone please help me.
Darksaviour69
January 14th, 2009, 10:07
google is your friend

http://museodelvideojuego.files.wordpress.com/2007/12/dreamcast-logo.jpg
werejag
May 13th, 2009, 10:43
did i say i needed a image of the logo or the real logo ?

no.... i need the plastic logo from the top of a uk/eu dreamcast.

please think about this
VampDude
May 13th, 2009, 17:10
Pre-owned faulty Dreamcast units on eBay are your friend...

Simply purchase one for something stupid like £2. then with a slim screwdriver remove the logo tab (or better yet get the seller to do it - saving you around £3 on postage). :cool:
werejag
May 15th, 2009, 06:13
since those come up very rarely. but thank you for the sugestion that i have been doing for 2 years.

now the goal of this thread isn't a redirect to ebay or other auction service but to get it from a response to this thread from uk/eu to ship a cheap plastic logo:thumbup:
Leprekaun
May 26th, 2009, 11:16
Well, a trick that you could do is print the logo on some transparent sticker designed to be printed on, and just mess around till you get the right size ;) or I can tell you the size of mine. (3.3cm x 2.3cm from beginning to end indentation)
werejag
May 26th, 2009, 13:11
Leprekaun

i have done this before this thread becuase the quality is not the same as an original logo. it looks alright but still not real.

so i keep searching
werejag
July 28th, 2009, 04:36
thanks all i have now a real logo coming in the mail.

too bad so many couldnt understand the topic.

thanks again
VampDude
July 28th, 2009, 20:10
I understood the topic.
Triv1um
July 28th, 2009, 22:17
It was me that sent on out.

It was a pain in the ass to get it off without damaging the logo.

It was also hard to get a hold of it, since its indented into the lid ;)

Also, I burnt myself on the hairdryer :(
werejag
July 29th, 2009, 05:53
It was me that sent on out.

It was a pain in the ass to get it off without damaging the logo.

It was also hard to get a hold of it, since its indented into the lid ;)

Also, I burnt myself on the hairdryer :(

thank you so much for doing that and the careful job you did removing it.
MAXIMUSpowers
September 15th, 2009, 17:52
No it was you that didnt explain it well.
Eviltaco64
September 15th, 2009, 21:09
No it was you that didnt explain it well.

Please don't bump old threads. The whole thing was resolved months ago. :P

Closed.