View Full Version : ir sell 3.0 nethost problem!

December 3rd, 2006, 03:03
ok i have firmware 2.71 se-c and i installed the ir shell 3.0

i have usbhost working perfert.
i can no get nethost to work.
please tell me what i have to do to get it to work, this is so far what i got in it.

my defualt internet conection 1.
my computer IP.
all drivers are installed, and i am hosting a nethost.
when i start the nethost, it says inisalazing the connection and all for around 10 seconds, and then it says error.

so yes please help me get nethost to work on my 2.71 se-c irshell 3.0!!

thank you :D

December 3rd, 2006, 04:51
Welcome to my world...

Make sure you have the default port open which can be found in configuration.
Make sure you have any firewalls disabled

December 3rd, 2006, 18:23
Dont quote me on this, but i think you need some firmware 1.0 prx's for that, let me go read the readme/faq to find out for you

Edit: Hmm, well the readme(install.txt) said you need 1.0 prxs for 1.5 version, but didnt say if you did or not for 2.71 version. If you havent got them, i would get them just to be sure

5. If you want to use adhoc PC connection for nethostfs access under fw 1.5 mode of SE-C, you'll need to install the network files from firmware 1.0.
- ms0:/IRSHELL/SYSTEM/ifhanlde.prx
- ms0:/IRSHELL/SYSTEM/pspnet.prx
- ms0:/IRSHELL/SYSTEM/pspnet_apctl.prx
- ms0:/IRSHELL/SYSTEM/pspnet_inet.prx
- ms0:/IRSHELL/SYSTEM/pspnet_resolver.prx

December 3rd, 2006, 22:29
ok i have all the prx's.

i have usbhost working perfect/
i have wireless internet perfect.
but i can not use the nethost, it just says cant connect to network host.

December 3rd, 2006, 22:50
im shure but you wont be able to get those here....but like others have said "google".... thats what i have done...its fast and easy...got them quick

December 6th, 2006, 20:01
same with me... maybe its my hardware.