Reply With QuoteIf you can't change the password, then couldn't someone easily look up the password for the program and have it?
Good idea but the ability to change the password needs to be implemented.
Results 1 to 6 of 6
Thread: PSPassword Protect *UPDATE*
-
November 18th, 2006, 15:05 #1DCEmu Legend
- Join Date
- May 2006
- Location
- Brentwood, NY
- Age
- 34
- Posts
- 2,976
- Rep Power
- 112
PSPassword Protect *UPDATE*
New release via Access_Denied
Well, here it is. A password protection program for the PSP. After a coldboot it automatically boots a password Program. There is no way to exit the program without the password. That's why that as of now, there is no way to change the password. I have left this out for pretty good reason. But if there is enough feedback about it, I will add it in. The universal password is 8314. Note that this REQUIRES 1.5 to get the full functionality. If you have a custom firmware, you MUST remove it as this program requires a certain custom firmware. After removing it, run the three flashers that come with the download. You may delete them afterwards except keep the config file flasher, as you might need it later.
*You are using this at your own risk. I am not responsible for ANY damages. Although I have personally tested this on my PSP, there is a chance something could happen. It's not my fault.*
UPDATE: I have attached an UN-flasher for this. It removes the custom firmware, the EBOOT.PBP and the config.txt. It's a slightly modified version of Slasher's custom firmware remover. Thanks Slasher. REMEMBER, use at your own risk!
download and give feedback via comment
via accessdenied
-
November 18th, 2006, 15:12 #2DCEmu Rookie
- Join Date
- Sep 2005
- Posts
- 157
- Rep Power
- 72
-
November 18th, 2006, 15:26 #3DCEmu Newbie
- Join Date
- Nov 2006
- Location
- Belfast
- Age
- 37
- Posts
- 68
- Rep Power
- 0
That's a bad idea about the password and does it support 2.71SE-B?
-
November 18th, 2006, 16:03 #4DCEmu Coder
- Join Date
- Jun 2006
- Location
- London
- Age
- 34
- Posts
- 4,123
- Rep Power
- 95
^ ^
Thats why it says REQUIRES 1.5 to get the full functionality
PSN ID: splodger15
-
November 18th, 2006, 16:39 #5DCEmu Old Pro
- Join Date
- Sep 2006
- Location
- Sheffield, UK
- Posts
- 1,629
- Rep Power
- 94
Yeah, i've looked and it writes the eboot to flash0. As yet, 2.71SE-B" only supports autobooting from a certain folder... If Dark_Alex can implement autobooting from another location. then its possible in that aswell
To be honest, I think it'd be better as a PRX for a custom firmware.
Cloudy
-
November 19th, 2006, 20:16 #6DCEmu Newbie
- Join Date
- Sep 2006
- Posts
- 18
- Rep Power
- 0
well you should allow it to change password cuzz yea anyone could still get in if they look it up
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks