PDA
[Wiz] PocketSNES 4 Wiz - v6.4.2
-

wraggster
May 8th, 2009, 23:04
News via http://www.gp32spain.com/

It is an emulator of the Nintendo video game called SNES (Super Nintedo Entertainment System) emulator ported to GP2X (PocketSNES 6.4.2 of Reesy and Headoverheels) for Wiz by Kyung-Min.

Download and Give Feedback Via Comments
rxshorty
May 9th, 2009, 01:30
Super! Going to try it right away! Thanks!
satherial
May 15th, 2009, 20:55
Hey Folks. I've tried running a few different SNES Roms on my new Wiz, however after booting up the application and selecting the Rom to load, I get a "Error setting DSP Speed" on a black screen. At this point the device is locked up and must be rebooted.

Any ideas?
satherial
May 15th, 2009, 21:02
haha... alright, nm, I'm an idiot, figured it out ;)
josephi44
May 16th, 2009, 21:18
im having the same prob. satherial, any help pls?
josephi44
May 16th, 2009, 21:19
Anyone pls?
rxshorty
May 17th, 2009, 20:11
Yep, try setting the sound qualtity on 22005 or so ;)
Djinn
May 18th, 2009, 20:35
Any particular reason why your forcing the CPU to 200Mhz instead of letting clock up to it's full speed and actually emulate the games at more than 17 fps?

-Djinn
portcitypetino
May 18th, 2009, 23:12
I cant get past the Error setting DSP Speed either and i tried the sound quality option too that was mentioned above, any help?
rxshorty
May 19th, 2009, 13:54
About the Mhz issue, it is a straight port... so no optimising has been done yet for the Wiz.

DSP Speed error really is the sound issue, try setting it to another sounds quality.
And don't forget to save it.
HeWhoCorrupts
May 19th, 2009, 22:27
my saves are disappearing... I have had this problem before with other emul things. How do you ensure or fix the save issue?

Also where are some good faqs and tutorials about the Wiz and it's commands.

I did the whole change the way it saves as well and still nothing is getting solidified.
Djinn
May 19th, 2009, 23:33
About the Mhz issue, it is a straight port... so no optimising has been done yet for the Wiz.


I thought the original version was limited to 200Mhz by the (default) speed of the processor? I recall the old GP2X version having a speed setting, but I don't see that menu here (in the Wiz titled GPE). Is there a way to correct this problem (because, seriously, defaulting to 200 Mhz, even on a port, is a major F-up).