Guide : Progging Pic12f629 for wiifree , Soldering Etc Etc Absolutely Allsorts!!!
If your contemplating installing any chip into your wii and your not sure of where to start, or unsure about soldering etc etc then read this guide.
If you want to pogram your own PIC12F629 with a homebrew hex, then read this guide.
If you wish to install an external socket then read this guide.
neary finished it now, just a few more little things to put in, but they can wait, its taken a long time to write this.
Its 8.8 meg in PDF, excuse the host if its shite i`ll get another, also excuse the shameless plugging of my site on there, i watermarked my photos, intending to release it as a word document, then decided to do it as a pdf and this has watermarked each page :S
here it is.
http://www.yourfilehost.com/media.ph...eekyMonkey.rar
and here
http://www.bigdisk.co.uk/483235 PASSWORD = monkey
this is what it contains :-
2.
Tips / Tricks
3.
Opening the Wii
4.
Install Schematic
5.
Installing your socket externally
6.
Choosing your Open Source hex code
7.
Programmer
8.
Programmer Layout
9.
Programming the PIC16F629
10.
Reprogramming the PIC16F629
11.
Troubleshooting : Soldering
12.
Troubleshooting : Desoldering
13.
Examples of other installs (wiikey / cyclowiiz)
oh and millions of photos...................
Its quite large i know, but i didnt want to degrade the photos with low rez.
any commments, please keep em nice ;).
