Iím almost done with the primary list of the 2nd run and even started with the backup list Ė so it all should be wrapped up soon. Turns out I got more black PCBs than I ordered so there will probably be a few spares left, I should be able to fulfill all preorders.
After that Iím taking a short break to work a bit on software and other projects but I will also attempt to assemble some more GDEMUs in case there is enough demand for the 3rd run. Assuming there is, the plan is to have a bunch of units prepared in advance and ready for shipping well before Xmas Ė so if you want to get one, keep an eye on this blog I figure these will trickle out sooner or later anyway so might as well go ahead and make them.
In other news: Both Saturn and the prototype PCB survived connecting together, which is good. PCE is also moving forward, there should be a prototype ready soon. Two actually, one for the console and one to interface with the drive directly to continue analysis.
Iíve also recently decided to go ahead and try KOS for the GDEMU menu, it seems most/all of what I need is under BSD type license. If any problems arise later I can always revert to my own libs.