This article criticizes the Raspberry PI Foundation's new computer the Zero. It points out that the Foundation says the purpose of the new Pi is to reach students but with all the needed equipment and experience it is ill suited for students. From the Hackaday story: "For development you need to set up the Zero with a power supply, mini-HDMI to HDMI adapter, HDMI cable, the USB OTG cable, USB hub, a keyboard, and possibly a mouse. After some hours of work youíre ready to try the software in your device. The cables are all disconnected and the board connected to the device. Tests are run. You pull the Zero out and plug everything back together for further software work. Thatís going to get old really fast so you get a second Zero so one can stay in the device. Now all you need to do is swap the SD card. If youíre going to do that, you donít need a second Zero since you can use a Pi 2 and get the advantages of its higher speed in development. Alternatively, you can use the USB OTG with a WiFi dongle, copy files to the Zeroís SD, and restart or reboot the device. Over WiFi you can also use SSH or a remote console to monitor the deviceís activities. How long did it take you to figure out all the cable connections in the second paragraph above? Do you think a student without a hacker friend will understand that? Remember, the goal is to reach students who donít know computers."
http://hardware.slashdot.org/story/1...ching-students