[OLD] Dualshock3 Windows Drivers Released

**doobie445** · March 15th, 2009, 14:54

it wont work. downloaded it to desktop and went to divice manager and my controller comes up as an hid game controller but doesnt work. then i try to update the driver and it cant find it. plz help thx.

**pilot091286** · March 21st, 2009, 06:19

got all it working but it rumbles constantly is there a way to make it only rumble only when i hit something on racing games?

and is there any way to get the motion control to work
ive seen it done on youtube but how?

**TBMFan** · March 21st, 2009, 12:43

No problem here with Vista
You just need to press the analog button after you plugin in the cable and hold the button for @ least 10 seconds

**TBMFan** · March 21st, 2009, 13:58

Originally Posted by Beto San

Is there a way to make lit only the first led, because in my controller the four leds are flashing.

I run PCSX2 and then the ROM i want to load
then plug the controller in all 4 leds are flashing
press Analog/PS Button till the buttons stops flashing

**Justino12345678** · April 5th, 2009, 20:04

ok.....i downloaded it all and when i go to update the driver, it wont let me change it cause it thinks the one already installed is "best" for it >

**ACXIE** · April 11th, 2009, 23:05

this is other version driver with vibration and easy to installwww.motioninjoy.com

**Ice_Kold_Killa** · April 24th, 2009, 10:27

Originally Posted by wraggster

A japanese coder has released Windows Drivers for the Dualshock 3 PS3 Controllers and they also support sixaxis too and even cooler is the fact they support rumble too:

There are 4 drivers in total

ds3drv_1.02 - Normal Driver
ds3drv_dx_1.02 - dx driver
SDDriverSetting - utility to tweak some settings
ForceFeedbackDriver - rumble driver, you need to install the first or second driver too

Installation:
download either the first or second driver, then open the device manager and search for the dualshock/sixaxis under hid devices, it should be called USB Human Interface Device
then choose update driver and select the driver that you just downloaded

Rumble
to install the rumble driver just right click on the .inf file and choose install
when you'll start a game you'll see a tray icon used to tweak rumble settings, the first menu option is to toggle rumble the second one will open a window where you can set the strength of the force feedback

the first value is the amplification ratio

the second one is the minimum value at which to start the small motors

the third and fourth one are the value of the large motors

the last value is probably the maximum strength

Download All files and Give Feedback Via Comments

can any1 tell me what they mean by OPEN THE DEVICE MANAGER....???

**Shrygue** · April 24th, 2009, 20:19

Go to the Start Menu, right click My Computer, choose Manage and then pick Device Manager in the Computer Mangement window.

**ybuckner** · May 2nd, 2009, 00:00

not working for me. i try to update the driver, it says the most up to date driver is alrady there. control is detected under control panel > hardware > game controllers, but it won't calibrate or register. I've installed 4 different drivers and followed the instructions to the letter, copying files to appropriate paths and so on. Any ideas?

**ACXIE** · May 4th, 2009, 16:59

you must do it as follows:
select "Let me pick from a list of device drivers on my computer"
select "Have Disk..."
you can refer to http://www.motioninjoy.com/blog/show/5

64bit driver refer to http://www.motioninjoy.com/blog/show/7