Shinobii Console Toolkit
Site: Buy from Shinobii / Buy from Amazon
Price: €19.99 / $24.99
Overview : This 19-piece toolkit contains everything you need in order to disassemble all the latest consoles such as Wii, DSi, PS3, XBOX 360 and PSP 3000. Of course, we havent forgotten about classic console owners therefore this kit also includes tools for opening up older consoles such as DS, DS LITE, PS2, PS1, XBOX, PSP1000, PSP2000, GAMEBOY, GAMECUBE, PSTWO, N64, SNES as well as Game cartridges and cellphones.
Perhaps you want to replace a defective drive, burnt out laser lens, scratched or cracked screen or any other defective part. Maybe you want to add an internal fan providing less noise and more cooling? No matter what, as most gamers already know, the console makers really give you a hard time when trying to open up their units and it`s a real challenge to find all the right tools to get the job done at least without damaging your console. The solution is the Console Toolkit™ from Shinobii.
All tools are precision machined from heat treated chrome vanadium steel and have chrome finish.
Console Toolkit™ includes: (Tools marked with a * are tamper resistant.)
- Hex 0.05
- Slotted 7/64
- Linehead Nut Setters #6
- Linehead Nut Setters #8
- Anti-slip Rubber Handle
- EasyGuide Plastic card (explaining what tools to use)
Quality/Usability : So the fine folks at Shinobii sent me their newest product, the Console Toolkit™. The tool kit consists of 19 pieces needed to disassemble everything from the Wii, DSi, Xbox 360, PS3 and PSP3000 all the way to old school and semi-old school products like the Xbox, DS, PS2, PS1, GameCube, N64 and even the SNES. The 19 pieces are placed inside a small black plastic case. Underneath the cover are 10 tools and tweezers. The bottom holds a 360 tool and anti-slip rubber handle.
All 10 tools are held in place by a rubber holder that prevents any of the falling out or. On the top of this rubber holder is a loop that allows you to pull the bits out and on this rubber holder are numbers. This lets you identify what tool is what by looking at the EasyGuide card. Incase you forgot where they belong, the numbers are also printed on the pieces themselves as well as Shinobii's company name. All the bits/pieces has two ends of them except for two (Linehead Nut Setters). So the end that is not used will be inserted into the anti-slip rubber handle and the side that is needed, is exposed.
Each piece is about 4½" long. When inserted into the rubber handle, approximately 2¾" is exposed. The rubber handle is just shy of 3½" long and 1" wide. The pieces insert smoothly but may feel a little loose at times but will not fall out unless you heavily shake it out. Each bit is also magnetic so you will be able to pick up screws without having to worry about dropping them or using a second hand to help you hold the screw in place while the other holds the handle. The bottom of the handle has grooves/curves that help assist you in gripping the handle better and tightening or loosening screws.
I'm not the type to go and open up perfectly working consoles unless I really have to but since I had some busted up and non-working electronics laying around, I thought I would give it a try. The handle felt good in the hand and removing screws was very easy and didnt require any effort. I was able to grip onto the handle thanks to the anti-slip rubber. I'm the type that has sweaty hands so this is a plus. I had an old PS1 that stopped working and was going to recycle it in the trash but was too lazy. Once I took the console apart, I didnt want to stop. I tried finding other electronics such as my old handheld TIGER devices, old cellphones that stopped working (fit the screws on the cellphones I had) and eventually, I couldnt find anything else. Now, I'm left with gutted and disassembled electronic casings and chipsets.
Conclusion : Overall, the Shinobii Console Tool Kit is a very nice product. It eliminated some of the bulk but putting a piece on each end rather than have 19 different pieces and makes fairly easy to carry and dropping it in your bag. I love the fact that the handle has grooves for your finger/thumb to allow you to have a better grip for turning and for someone who has sweaty hands, I didnt loose my grip. I also like that each piece is magnetic so the screws cling on to the piece for easy removal and insertion without the need for a second hand. However, I would of probably liked to see the anti-slip rubber handle be slightly bigger. Those with big hands may find the handle a little small for their grips.
Images via comments
The real mckoy...
There are currently 1 users browsing this thread. (0 members and 1 guests)