Results 1 to 1 of 1

Thread: E3 Card Reader 3.42, 3.50 and above Downgrader Released!

                  
   
  1. #1
    Reviews Webmaster/Reviewer bandit's Avatar
    Join Date
    Oct 2005
    Location
    New York City, USA
    Posts
    3,001
    Rep Power
    50

    ps3 E3 Card Reader 3.42, 3.50 and above Downgrader Released!




    We got this news from our source and thought we would be the first to share it (site was down). You can also read our full review on the E3 Card Reader here. THIS WILL NOT WORK ON OTHER JAILBREAK DEVICES.

    You can purchase your E3 Card Reader at Acekard.ca (10% off - coupon code 10acekardca), LighTake (10% off - coupon code TJOOS), PriceAngels, VolumeRates and MyGamingMart.

    Dear friends,

    Thank you for using E3card Reader PS3. Today we will bring you a big surprise: the E3-Downgrader for E3card Reader. Yes it's THE downgrader which can turn your 3.5 PS3 down to any version you wanted, i.e. the 3.41. It's no time limit, no PC software need to download, no need to write any emails, no need to wait and after all it's FREE. Yes, it's true. We can even proved that today it's not the day one of you need to go on board of some you know what ships, that of cause because we are Chinese. You can review the videos by click , download the upgrade file by click here and download the 3.41 FW package by click here.

    Password : iLoveE3
    please note that it's case-sensitive.

    If you have any questions, please feel free to contact us.

    Best Regards

    E3Diy Group
    E-mail: [email protected]

    How to downgrade firmware 3.42/3.50 or above to firmware 3.41 with E3 Card Reader :
    1. Download and extract "e3downgrade_12.03.rar" to your computer
    2. Insert E3 Card Reader into the USB port of your computer.
    3. On your file browser, open "E3Upgrader"
    4. Drag and drop .bin file from "e3downgrade_12.03.rar" into "E3Upgrader"
    5. Red LED will flash. When you see the blue LED, that means the upgrade is successful and complete.
    6. Remove E3 Card Reader from computer
    7. Insert E3 Card Reader device that has been reprogrammed as downgrader into your console
    8. Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up red LED followed by blue LED
    9. Turn off system via menu
    10. Remove E3 Card Reader dongle and turn on console to make sure you are in Factory Service Mode. You will see a huge red box on the screen saying Factory Service Mode.
    11. Load any blank FAT32 USB flash drive device with 2 files in the root directory:
      1. Modified 3.41 PUP
      2. Lv2Diag.self (File 1)
    12. These must be the only files on the USB key and must be placed in the main (root) directory.
    13. Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
    14. The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
    15. Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
    16. (Optional) – If you wish to downgrade to any older firmware you can follow step 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
    17. Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
    18. Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
    19. Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.

    To go back to E3 Card Reader jailbreak device, just drag back the normal .bin files. - e3 card reader, new generation ps3 chip with mulit-function

    Files can be downloaded at E3DIY
    Last edited by bandit; December 5th, 2010 at 10:41.
    Follow us (1KIND Photography): Website | YouTube | Facebook | Twitter
    Follow Us (DCEmu Reviews): YouTube | Facebook | Twitter

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •