Results 1 to 2 of 2

Thread: Flood Gate for Downgraders Opens and True USB Device Master Key found *UPDATED*

                  
   
  1. #1
    Reviews Webmaster/Reviewer bandit's Avatar
    Join Date
    Oct 2005
    Location
    New York City, USA
    Posts
    3,001
    Rep Power
    50

    ps3 Flood Gate for Downgraders Opens and True USB Device Master Key found *UPDATED*

    Theres 3 news in one as they all are related...


    PS3YES! has just released their own downgrader...

    Thanks to: PSGroove.com

    And many thanks to the scene developers that work hard to bring these tools to everyone:

    Graf Chokolo, zAxis, Hansi, Hermes, Kakaroto

    Our downgrade firmware is based on the PSGrade project, we will open the source soon.

    Support for the following:

    PS3YES AT90USB162 8mhz
    PS3YES AT90USB162 16mhz
    AT90USBKEY at90usb1287 8mhz
    Teensy++ 1.0 at90usb646 16mhz
    Teensy++ 2.0 at90usb1286 16mhz

    Since firmware 3.55 is out for the PS3, you can only use downgraders to downgrade firmwares 3.50 or LOWER!

    NOTE: Importing the HEX to other devices using current payload converters will NOT work!

    Source: PS3YES! via PSGroove

    -----------------------------------------------

    That's not all. PS3Key has also released their own downgrader as well and you can read our review HERE.

    Posted on 7th December 2010

    If you need to downgrade a PS3 with firmware version 3.50 or below you can now grab the PS3KEY JIG firmware from the downloads section! Please note that we do not host the modified PUP file or any other file that may contain copyrighted code.

    ATMEL and SiLabs have been attached.

    Source: PS3Key

    -----------------------------------------------

    *UPDATE ADDED* 12/8/2010

    Only For Use With PS3break v1.0 - Not For Use With 1.1 or 1.2!

    Hot news: PS3break V1.0 Downgrade Mode Firmware has been tested successfully [12/8/2010]

    Ps3breakV1.0 Downgrade Mode Firmware will be issued today,but PS3BREAK V1.1 and V1.2 Downgrade Mode Firmware all the users concerned is testing and will be released later.Please pay more your attention to PS3BREAK official news closely.

    Source: PS3Break / PS3Break Download

    -----------------------------------------------

    *UPDATE ADDED* 12/8/2010


    PS3USBJAILBREAK Downgrader released - Date: 12-08-2010

    Downgrader for PS3SUBJailbreak has now released.
    Please download our programming tools v1.2.8 to reflash.

    You can purchase PS3USBJailbreak from LighTake for $12.99 and get 10% off using coupon code TJOOS.

    Source: PS3USBJailbreak

    -----------------------------------------------

    *UPDATE ADDED* 12/8/2010


    PS3go finally released their downgrade update via the a9vg forum's! You can read our review HERE.

    Source: P3Go

    -----------------------------------------------

    Last but not least, with the release of downgraders, KaKaRoTo has found out the TRUE USB > AAAA Device Key that is used by all downgrading service Jig dongles. There were many so-called "master keys" however, PS3YES! obfuscated the key, xor-ed it with 0x36 and swapped bytes 11 and 16. The real key is below.

    0xAAAA dongle key:

    04 4E 61 1B A6 A6 E3 9A 98 CF 35 81 2C 80 68 C7 FC 5F 7A E8

    What does this mean for end-users? Nothing much except for the fact that now, the downgrader will be open source in the form of PSGrade by zAxis. PSGrade was a work in process (WIP) downgrader however, it was not working as he could not find the key that was needed...until now.

    Source: KaKaRoTo Twitter

    -----------------------------------------------

    For your convenience, we have included PS3YES! (Fit to all at90usb162 8Mhz and 16Mhz boards), PS3Key, PS3USBJailbreak, P3Go and PSGrade open source files for the usual USB boards such as Teensy, Olimex, Blackcats, Minimus, etc.

    REMEMBER THAT THIS DOES NOT REPLACE YOUR HERMES/KAKAROTO PAYLOADS. THIS IS NOT A REPLACEMENT.
    Last edited by bandit; December 8th, 2010 at 16:16.
    Follow us (1KIND Photography): Website | YouTube | Facebook | Twitter
    Follow Us (DCEmu Reviews): YouTube | Facebook | Twitter

  2. #2
    Nightmaren Shrygue's Avatar
    Join Date
    Jun 2006
    Location
    Kojima Shinden
    Posts
    12,935
    Rep Power
    126

    Default

    I did the downgrading process using a PS3break v1.1 dongle to revert to PS3 firmware version 2.40 and it worked out just fine. Only problem I had was display issues and nothing showing up properly as I use a VGA box + computer monitor rather than a TV. Used my PS1 screen instead (casing unscrewed, to be able to connect it to the console.) so I could check firmware version and factory mode status.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: December 8th, 2010, 01:06

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •