PSP New Ver. HardWare TA-086 from PSP1000CW

***wraggster*** · November 15th, 2006, 22:16

Ookm has posted some new screens of the new Hardware revision for the PSP and this info:

PCB Ver. : TA-086
CPU Core : CXD2967GG
Media Engine : CXD5026-203GG
MCP : K5E5658ACM-D060 1.8V/1.8V

Test report :
Factory FW2.81 (BoxCode L)
can HardDown to FW1.50
and run official FW2.71 UpDate EBOOT.PBP

#
HardDown = Hardware method DownGrade
SoftDown = Software method DownGrade

Screens Via Comments

**splodger15** · November 15th, 2006, 22:21

I saw this on his blog spot its good he is updating us with the info

**Lt-Razorworks** · November 15th, 2006, 22:37

So by Hard Down to 1.50...you mean this board is 1.50 compatible?

**wolfpack** · November 15th, 2006, 22:45

yes it is, theres just a specific way for it to do that though

**Avi** · November 15th, 2006, 22:47

harddown? how exactly does one harddown their psp?

**Ichijoe** · November 15th, 2006, 23:06

To quote from the Front Page...

"HardDown = Hardware method DownGrade -
SoftDown = Software method DownGrade"

It would in Ones' opinion refer to a Modchip install, as opposed to a Software v2.00>v1.50 Hack.

But, that's only the way I've read it...

**jonezybaby** · November 15th, 2006, 23:07

says harddown is hardware method downgrade, get the right hardware and 1.5 for every1 (then up to 2.71 SE-B") lol

**carlitx** · November 15th, 2006, 23:21

so does this mean if i were to get one of these new PSP's id beable to downgrade soon as i open it or what? im kinda slow on these issues.

**YourStillWithMe** · November 15th, 2006, 23:33

carlitx-no, what it means is that it is possibleto downgrade to a 1.50 if a 2.81 ever does get cracked (we'll focus on 3.00 i bet so i would just upgrade to 3.00)