I mean will it be possible to connect Holux with self made mini-b to mini-b cable?
Because I'm from Latvia and I can't find any gadgets with PSP control connectors
I mean will it be possible to connect Holux with self made mini-b to mini-b cable?
Because I'm from Latvia and I can't find any gadgets with PSP control connectors
I see. Well, I followed the instructions; I took apart my PSP remote control and used the connector from there ( grey one goes to USB#3 and the blue one goes to USB#1 ) and took a mini-USB cable ( which came with my digital camera, but I use a cardreader in my computer ) and soldered a 1K resistor the way it is described. Works great, I only had once when the little cable snapped, but now I have it secured, so it works just fine.
Regards.
Please see attached:
A serialport dump configured for 4800 baud support. It was requested to test non-38kbps devices.
you could try gnokii (it's in univrese). It was written as an interface to Nokia phones but apparently it works with others as well. Not sure if Sony is supported.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks