[RELEASE] CIntro Modifier v.1.02 (Replaces Coldboot Screen)

[Cloudhunter]

sad day today yester day i repaired my bricked
ta-082 psp by replacing the motherboard and updated
to 3.03 oe-a2 then used this app.

now when i turn on the psp you hear the disc spinning
and the mem stick light flashes for about 2 second then it's stuck and it wont go in recovery mode
any sugestions

To be honest, it's your own fault for using it on a firmware that isn't supported.

Cloudy

[firelink88]

on irshell how do i get it to boot with a custom pmf???

[tsurumaru]

To all those who have bricked their PSP's.

ITS YOUR OWN FAULT. TRY READING THE INSTRUCTIONS:

"--YOU MUST HAVE 3.02OE-B INSTALLED FOR THIS TO WORK PROPERLY--"

3.03 hadn't even been announced when this was released.

I even posted a thread in this very forum warning everyone to make sure they were using the correct version. This is for 3.02OE users only. Since the prx's changed in 3.03 using this version on a 3.02 WILL brick it. There is a newer 3.03 OE version out there now.

http://www.dcemu.co.uk/vbulletin/showthread.php?t=48721

And even a non Flash version:

http://www.dcemu.co.uk/vbulletin/showthread.php?t=49303

[Ayamatta_Kurashi]

is there a version of Cintro that will work on 3.52 m33?