try mine http://files.filefront.com//;7436650;;/
the prx files are for 3.30 OE-A and 3.40 OE-A
have you tried pressing SQUARE? to turn on the gps mode? as it is off by default, and I don't see where you say you have tried that...
also what happens in the gps tester program?
yes i have pressed square
it doesn't work with the provided files either
you didn't answer my question, well you answered the one about pressing square, but skipped the more important one.
When you first turn the tester on
-Loading USB Accesory module... ok
-Loading USB GPS module... ok
-Starting USB BUS driver... ok
-Starting USB Accesory driver... ok
-Starting USB GPS driver... ok
-Opening USB GPS device... ok
-USB State = 0x111 [deactivated]
-GPS State = -1 location: 0
When you press X
-USB State = 0x211 [activated]
-GPS State = 0 location: 0
btw, is there any way to get this to work on m33
still no answer...
i have same problem...gps state is always off no matter how many times i push square or set it to read gps from unit....its getting really anoying ive tried about 5 different peoples sets of files.
Make sure you disable your WIFI. I had the same problem before
There are currently 1 users browsing this thread. (0 members and 1 guests)