Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: No$gba v2.4d - GBA and DS Emulator for Windows

                  
   
  1. #1
    Won Hung Lo wraggster's Avatar
    Join Date
    Apr 2003
    Location
    Nottingham, England
    Age
    52
    Posts
    139,518
    Blog Entries
    3209
    Rep Power
    50

    GBA No$gba v2.4d - GBA and DS Emulator for Windows

    No$gba the GBA and DS Emulator for Windows has been updated with a new release:

    heres whats new:

    - debug/setup: allows to enable/disable user-debugmsg, wifi-log, and 3d-log
    - cpu: emulates undef opcode/copro exception (with warning if no bios/vector=0)
    - wifi/emu: emulates new bits in rx header, and optional auto sequence control
    - cpu/bugfix: arm ldm/stm accidently destroyed mis-alignments (on writeback)
    - wifi/help: added info on port 1C4h, and on some of the 1Bxh ports (rxstat's)
    - wifi/help: added new chapter on transmit errors and automatic ACK responses
    - wifi/help: added info on ports 1A8h,1AAh,1ACh,1AEh (bit0..12 vs. 1B0h..1BFh)
    - wifi/help: discovered new bits in RX header, added notes on MAC addresses
    - wifi/debug: allows to log all packets (with automatic comments on ieee header)
    - wifi/help: added notes on automatic sequence ctrl and auto-modified frame ctrl
    - wifi/emu: tx-engine uses new timers, and emulates length/rate/preamble timing
    - wifi/emu: emulates the various wifi counters and irqs at correct timing
    - debug/setup: memorizes if iomap window was open (if so, re-opens it on boot)
    - debug/emustop: break_requests (esc-key) take place only on current machine
    - debug/internal: replaced ds:bibos swi_retadr/haltstop/intrwait by vals:bios
    - debug/vramviewer: oam viewer supports extended obj palettes (thanks pierre)
    - debug/vramviewer: fixed engine-B palette viewer (thanks pierre for bug report)
    - dslite/help: added info on new TSC chip by AKM (new IN2, different PD bits)
    - dslite/help: added note on near-crt-quality colors and wider viewing angles
    - dslite/help: added custom change-channels-flowchart for new wifi-type3-chips
    - dslite/help: added settings at firmware[0CEh-and-up] for new wifi-type3-chips
    - dslite/xboo: updated nds-pins.gif (added new pin-positions on ds-lite board)
    - dslite/xboo: added 8 extra diodes in data lines (to prevent power-on problem)
    - dslite/help: added lite-specific wifi (W) mirrors, and unused wifi ram/ports
    - dslite/help: added the new backlight level bits in firmware user settings
    - dslite/help: added caution on DS-lite destroying wifi ports 064h and 076h
    - dslite/help: added new powerman backlight/power register (and lost mute-bit)
    - dslite/help: added ID for firmare chip 35PE20P (and supported it in ds-xboo)
    - powerman/help: added unknown bit (mutes volume to zero, if amplifier is on)
    - wifi/emu: emulates initial wifi-port settings and random register (mod 5FDh)
    - wifi/emu: emulates primary wifi irq flag stuck zero while secondary nonzero
    - wifi/emu: emulates corrected ports (004h,0ACh,0AEh,0B0h,0B4h)
    - wifi/emu: emulates new ports (210h, 05Ch/06Ch, 062h/064h) and new mirrors
    - wifi/help: added rx/tx signal/timing charts (rfu pins, aka 19Ch bits)
    - wifi/help: added specs/cautions on primary wifi irq flag (2000214h.Bit24)
    - wifi/help: added new mirrors (on read from 0ACh,0AEh,20Ch,21Ch,298h,2A8h,2B0h)
    - wifi/help: added notes/info on ports 038h,19Ch,214h,21Ch and on W_CONFIG_140h
    - wifi/help: new bits 0EAh.1,008h.13/14 004h.14); extra-TX ports 118h,0EEh,090h
    - wifi/help: corrected ports 004h,0ACh,0AEh,0B0h,0B4h and txstat.bit12-13
    - wifi/help: added info on new ports (110h, 210h, 05Ch/06Ch, 062h/064h)
    - wifi/help: fixed tx_hdr: rate 8bit (not 16bit) defaults to 1Mbit/s if invalid
    - wifi/help: added new bits: port004h.bit0 tx_master, 008h.bit15 beacon_irq1
    - wifi/help: major updates in timers chapter (reloads, IRQ13/14/15, 22MHz, etc)
    - nds/help: pinouts for nds LCD sockets, wifi RFU boards, and powerman chips
    - gui: mousewheel support (win98 or dos/ctmouse) (thanks jasper/idea, tilo/hw)- debug/setup: allows to enable/disable user-debugmsg, wifi-log, and 3d-log
    - cpu: emulates undef opcode/copro exception (with warning if no bios/vector=0)
    - wifi/emu: emulates new bits in rx header, and optional auto sequence control
    - cpu/bugfix: arm ldm/stm accidently destroyed mis-alignments (on writeback)
    - wifi/help: added info on port 1C4h, and on some of the 1Bxh ports (rxstat's)
    - wifi/help: added new chapter on transmit errors and automatic ACK responses
    - wifi/help: added info on ports 1A8h,1AAh,1ACh,1AEh (bit0..12 vs. 1B0h..1BFh)
    - wifi/help: discovered new bits in RX header, added notes on MAC addresses
    - wifi/debug: allows to log all packets (with automatic comments on ieee header)
    - wifi/help: added notes on automatic sequence ctrl and auto-modified frame ctrl
    - wifi/emu: tx-engine uses new timers, and emulates length/rate/preamble timing
    - wifi/emu: emulates the various wifi counters and irqs at correct timing
    - debug/setup: memorizes if iomap window was open (if so, re-opens it on boot)
    - debug/emustop: break_requests (esc-key) take place only on current machine
    - debug/internal: replaced ds:bibos swi_retadr/haltstop/intrwait by vals:bios
    - debug/vramviewer: oam viewer supports extended obj palettes (thanks pierre)
    - debug/vramviewer: fixed engine-B palette viewer (thanks pierre for bug report)
    - dslite/help: added info on new TSC chip by AKM (new IN2, different PD bits)
    - dslite/help: added note on near-crt-quality colors and wider viewing angles
    - dslite/help: added custom change-channels-flowchart for new wifi-type3-chips
    - dslite/help: added settings at firmware[0CEh-and-up] for new wifi-type3-chips
    - dslite/xboo: updated nds-pins.gif (added new pin-positions on ds-lite board)
    - dslite/xboo: added 8 extra diodes in data lines (to prevent power-on problem)
    - dslite/help: added lite-specific wifi (W) mirrors, and unused wifi ram/ports
    - dslite/help: added the new backlight level bits in firmware user settings
    - dslite/help: added caution on DS-lite destroying wifi ports 064h and 076h
    - dslite/help: added new powerman backlight/power register (and lost mute-bit)
    - dslite/help: added ID for firmare chip 35PE20P (and supported it in ds-xboo)
    - powerman/help: added unknown bit (mutes volume to zero, if amplifier is on)
    - wifi/emu: emulates initial wifi-port settings and random register (mod 5FDh)
    - wifi/emu: emulates primary wifi irq flag stuck zero while secondary nonzero
    - wifi/emu: emulates corrected ports (004h,0ACh,0AEh,0B0h,0B4h)
    - wifi/emu: emulates new ports (210h, 05Ch/06Ch, 062h/064h) and new mirrors
    - wifi/help: added rx/tx signal/timing charts (rfu pins, aka 19Ch bits)
    - wifi/help: added specs/cautions on primary wifi irq flag (2000214h.Bit24)
    - wifi/help: added new mirrors (on read from 0ACh,0AEh,20Ch,21Ch,298h,2A8h,2B0h)
    - wifi/help: added notes/info on ports 038h,19Ch,214h,21Ch and on W_CONFIG_140h
    - wifi/help: new bits 0EAh.1,008h.13/14 004h.14); extra-TX ports 118h,0EEh,090h
    - wifi/help: corrected ports 004h,0ACh,0AEh,0B0h,0B4h and txstat.bit12-13
    - wifi/help: added info on new ports (110h, 210h, 05Ch/06Ch, 062h/064h)
    - wifi/help: fixed tx_hdr: rate 8bit (not 16bit) defaults to 1Mbit/s if invalid
    - wifi/help: added new bits: port004h.bit0 tx_master, 008h.bit15 beacon_irq1
    - wifi/help: major updates in timers chapter (reloads, IRQ13/14/15, 22MHz, etc)
    - nds/help: pinouts for nds LCD sockets, wifi RFU boards, and powerman chips
    - gui: mousewheel support (win98 or dos/ctmouse) (thanks jasper/idea, tilo/hw)

    Download and Give Feedback Via Comments

  2. #2
    DCEmu Legend acn010's Avatar
    Join Date
    Dec 2005
    Location
    Galaxy not far away?
    Age
    36
    Posts
    4,656
    Rep Power
    100

    Default

    it wow... that is how much got improved???
    thats cool... thanks for the info

  3. #3
    DCEmu Old Pro mcdougall57's Avatar
    Join Date
    Jul 2006
    Posts
    1,324
    Rep Power
    70

    Default

    gibberish to me lol looks like a lot of updates tho keep up the good work

  4. #4
    DCEmu Newbie
    Join Date
    Jan 2006
    Posts
    47
    Rep Power
    0

    Default

    Quote Originally Posted by acn010 View Post
    it wow... that is how much got improved???
    thats cool... thanks for the info
    Not quite that much... mostly help updates. The thread poster double pasted the changelog (or martin did?)

    edit/ yeah, the thread poster did. Full changelog is at the history link from the page linked above.
    http://nocash.emubase.de/gbanew.htm

  5. #5
    PSP User xg917's Avatar
    Join Date
    Nov 2006
    Location
    In the middle of nowhere, FL
    Age
    32
    Posts
    2,131
    Rep Power
    75

    Default

    weird, isnt this supposed to be full speed? my computer is brand new and this emu isnt full speed wtf? i heard this is full speed though.

  6. #6
    DCEmu Legend acn010's Avatar
    Join Date
    Dec 2005
    Location
    Galaxy not far away?
    Age
    36
    Posts
    4,656
    Rep Power
    100

    Default

    Quote Originally Posted by cory1492 View Post
    Not quite that much... mostly help updates. The thread poster double pasted the changelog (or martin did?)

    edit/ yeah, the thread poster did. Full changelog is at the history link from the page linked above.
    http://nocash.emubase.de/gbanew.htm
    wow thanks

  7. #7

    Default

    Nice a new release, probably the best ds emulator


  8. #8

    Default

    wasn't the last version also 2.4d?
    I don't go on here much anymore. Find me on GBAtemp.


  9. #9

    Default

    Quote Originally Posted by TeenDev View Post
    wasn't the last version also 2.4d?
    Read the history, the last version was 2.4c


  10. #10

    Default

    wow this is amazing...except i have no idea what any of those mean. does this mean no$gba has wifi where you can connect to a real DS and trade stuff?

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •