[GUIDE]{PSP SLIM}3.60 M33 Custom Firmware

[Bobtentpeg]

No, the slim battery is fine, it might need a little charging and the info not showing up inst to big deal, that was fixed in later frmware

I would recommend 380 or 390

[entroix]

i am using a psp phat 3.52 M33-4 and a psp lite 3.60 i tried everything to make it work but when i try to install Pandora Ext. For Slim 3.60 Installer i get the game could not be started error. and therefore when i insert the magic ms on my psp lite and the pandoras battery i cannot install the homebrew software on my new psp. any suggestions?

[Bobtentpeg]

Are you running in 1.5 kernel mode on 352? have you installed the kernel addon

[FoShizzle17]

Will this guide work with a PSP fat pandora battery? Because I already have one made.

My slim is at OFW 3.90 & my fat is at CFW 3.71 M33-3

[Bobtentpeg]

Will this guide work with a PSP fat pandora battery? Because I already have one made.

My slim is at OFW 3.90 & my fat is at CFW 3.71 M33-3

either
1. You lack the ability to read
2. You didnt bother to read ANYTHING

In the title it says
[PSP SLIM]
in the materials list it says
PSP Slim

[FoShizzle17]

either
1. You lack the ability to read
2. You didnt bother to read ANYTHING

In the title it says
[PSP SLIM]
in the materials list it says
PSP Slim

in one of the steps you say "Now put the battery you wish to use as your Pandora's Magic Battery in your PSP."
Are you talking about a modded battery or not? If you are then I need to know if I can use the modded PSP fat battery that I have (I used it to get CFW on my fat)

[Bobtentpeg]

You can only softmod fat batteries not slim ones...

[FoShizzle17]

what about this
http://www.pspmod.com/forums/psp-har...t-fat-psp.html

so you're talking about a modded fat battery right?

[Bobtentpeg]

In that step your creating the modded battery via writing 0x000000 to the eeprom.
an unhardmoded battery is what you use

[Jimmy3500]

If the slim psp is on 3.80 does this method still work or does something different need to be done?
Thanks