Results 1 to 5 of 5

Thread: when i turn my DC on all I get is a black screen

                  
   
  1. #1
    DCEmu Newbie
    Join Date
    Jul 2005
    Posts
    2
    Rep Power
    0

    Default when i turn my DC on all I get is a black screen

    i recently bought a dreamcast via ebay. when i plugged the A/V cables into my TV and turn it on, nothing showed up on my screen. I went through all the inputs, and tried channel 3. I also tried another TV to see if that was it. It wasn't, I can't seem to get the audio or video to do anything.

    This was with nothing in the dreamcast, I hadn't tried to put a game or music cd in yet. Is this problem known, common, am I doing something wrong, or did I just get a busted DC??

    thanks

  2. #2

    Default

    Could be. However, you really should get a RGB SCART cable to try it out again. Also, for the case your DC really does not work (I don't think that'll the case), you could still use the RGB SCART connector for the next DC you buy: the picture quality will be like a dream using that cable. A broken DC is still of use for some people, so for the case you do not get it to work via the RGB SCART cable, please try to re-sell it at ebay.

  3. #3
    DCEmu Pro ptr.exe's Avatar
    Join Date
    Jan 2005
    Location
    london
    Posts
    840
    Rep Power
    61

    Default

    Im interested in broken DC's for parts, however this doesnt sound broken.

    Just to clarify the cables your using are three RCA plugs, yellow, white and red, yes?

    Firstly, check you're on the right channel, why would you try channel 3? if your TV has a scart then the AV will probably be called something like EXT 2, if not then it will be called AV1. I'm sure you're probably plugging it in right but some people make stupid mistakes

    To check if the plugs are making a connection with ground, plug the red and white into an amp or hi-fi and see when you turn the DC on if your getting any sound at least, if not then the cable is not making a connection with ground on the DC end.

    Its possibly a bad connection, i had a PS2 AV cable that had its ground pin slightly bent inwards so made a random contact - flickering. Check that the little silver bits on the DC side are visible and all the same length. Also check the DC console AV port for any dirt, or gunk that would stop a contact.

    Try this and get back to me.

  4. #4
    DCEmu Newbie
    Join Date
    Jul 2005
    Posts
    2
    Rep Power
    0

    Default

    thanks for the responses. I tried all the AV things, in one TV I have three and the other I tried it only had one. I'll check the cables when I get home (I'm at work now) and see if there is any gunk on it. thanks

  5. #5
    DCEmu Pro ptr.exe's Avatar
    Join Date
    Jan 2005
    Location
    london
    Posts
    840
    Rep Power
    61

    Default

    Cellphone & Accessories 5% Off Consumer Electronics 8% Off Car Accessories 7% Off Computer & Networking 7% Off Cheap & Cool Gadgets 8% Off Personal Health Protection 10% Off Home Garden & Tools 10% Off Sports & Outdoors 10% Off Health & Beauty 10% Off Apparel & Jewelry 12% Off
    Well, if it only has one then you're definately on the right channel

    Like i said check the sound as it really sounds like there is no grounding on the DC end of cable.

    You could easily check if the DC is broken, open it up and get down to the mobo, where the AV port is there are some small blobs of solder perfect for sodlering a cable to. Use a stripped AV cable and solder the ground wire to the ground on the PSU. Then the signal wire to pin 13, theres a diagram in the internal VGA topic below this - it will show where pin 13 is on the blobs of solder.

    Need any more help just ask.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •