GPS PSP-290 MapThis 0.5zz

**zzzn00bzzz** · November 18th, 2007, 21:24

Using 3.71 M33-3

No signal at all.

I downloaded the map of my area LaSalle, QC, Canada.

Receive no signal and gps does NOT even calculate the speed.

Please help me. I am using the correct prx's from 3.71 decrypted (posted in the forum).

The mapview is placed in the game371 folder (tried all folders).

**compsci3000** · November 18th, 2007, 23:25

I am using 3.71 M33-3 and there is no problem with this software. You can try an official version of MapThis and see if the problem persists. It might be hardware issues.

**zzzn00bzzz** · November 18th, 2007, 23:30

I have tried all of them from 0.5 series. It says GPS Status on ( I even tried disconnecting it it went to "off" then reattached it, switched to activating and then on) But there is no satellite info...

**compsci3000** · November 19th, 2007, 00:32

Then go to some remote areas to pick up satellite signals. Too much electronic noise inside the city.

**zzzn00bzzz** · November 19th, 2007, 02:27

I am outside of the city that's the thing. Not many buildings clear area.

**compsci3000** · November 19th, 2007, 02:33

One possible reason: defective PSP-290.

**zzzn00bzzz** · November 19th, 2007, 03:12

alright, just needed a confirmation. I also was driving in a car today and It was not working. Thanks.

**compsci3000** · November 19th, 2007, 03:25

If in GPS info menu, there is always no satellite info shown, you might have hardware problems.

**zzzn00bzzz** · November 20th, 2007, 20:29

The problem that I am facing, I was riding around the city today and I was picking up sat signals. SAT-IN-VIEW was around 2-4. BUT it was not locking on the map, the speed was always at 0.

And in the sat info colums/rows it would say FIX: 0

Dunnot know what it means. Please help guys.
Today I was using 0.5.2