wraggster
April 16th, 2008, 21:24
via xbox-scene.com (http://www.xbox-scene.com/)
New experimental patches have been released on free60.org for one of the latest linux kernel (2.6.24.3). This will allow the people running Linux on their Xbox 360 to upgrade to a newer kernel:
Get the source for the Linux 2.6.24.3 Kernel from kernel.org (http://www.kernel.org/) and unpack it somewhere in your home directory.
cd
wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.3.tar.bz2
tar -xvjf linux-2.6.24.3.tar.bz2
2. Download and apply the experimental Xenon patchset.
cd linux-2.6.24.3/
wget http://home.comcast.net/~ssmurf/linux-2.6.24.3-xenon.diff
patch -p1 < linux-2.6.24.3-xenon.diff
done
3. Configure the Kernel.
make ARCH=powerpc CROSS_COMPILE=powerpc64-unknown-linux-gnu- menuconfig
4. Build the Kernel by typing:
make ARCH=powerpc CROSS_COMPILE=powerpc64-unknown-linux-gnu- all
Or if you have ppu-gcc properly set-up: CROSS_COMPILE=ppu-
If everything goes well, you will end up with a file arch/powerpc/boot/zImage.xenon containing the kernel which can be loaded by the XeLL.
Remember, these patches are Experimental!
http://www.free60.org/wiki/Linux_Kernel#Configuring_and_Compiling_the_Kernel_ with_experimental_patches
New experimental patches have been released on free60.org for one of the latest linux kernel (2.6.24.3). This will allow the people running Linux on their Xbox 360 to upgrade to a newer kernel:
Get the source for the Linux 2.6.24.3 Kernel from kernel.org (http://www.kernel.org/) and unpack it somewhere in your home directory.
cd
wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.3.tar.bz2
tar -xvjf linux-2.6.24.3.tar.bz2
2. Download and apply the experimental Xenon patchset.
cd linux-2.6.24.3/
wget http://home.comcast.net/~ssmurf/linux-2.6.24.3-xenon.diff
patch -p1 < linux-2.6.24.3-xenon.diff
done
3. Configure the Kernel.
make ARCH=powerpc CROSS_COMPILE=powerpc64-unknown-linux-gnu- menuconfig
4. Build the Kernel by typing:
make ARCH=powerpc CROSS_COMPILE=powerpc64-unknown-linux-gnu- all
Or if you have ppu-gcc properly set-up: CROSS_COMPILE=ppu-
If everything goes well, you will end up with a file arch/powerpc/boot/zImage.xenon containing the kernel which can be loaded by the XeLL.
Remember, these patches are Experimental!
http://www.free60.org/wiki/Linux_Kernel#Configuring_and_Compiling_the_Kernel_ with_experimental_patches