ra2000
May 7th, 2008, 13:06
Great product Deniska, and great forum !
I have a PSP1000 (TA079/081) with System Software 3.90 M33-2 loaded and Mapthis ver 0.5.20 and off line all is running fine.
However, whenever I attach the Holux 240 with the special GHPSP cable from PC-Mobile I don't get any satellite fix.
When I press the square button, it briefly flashes GPS Mode ON, but when I enter GPS Info it reads GPS STATE: OFF
I have googled and searched threads for answers and have run Chilly Willy Key Cleaner ver1.4 which reports all keys OK.
I have notived that when the USB cable to the PC is in, the GPS STATE changes to "Activating" but immediately reverts to OFF when I disconnect the cable.
I am really stuck and don't know what is the problem. Any help would be really, REALLY appreciated:thumbup:
Many thanks in advance folks !
Post Script : Now solved the GPS State:OFF
I decided with my (very) rudimentary skills to take a closer look at the config.txt file held in folder : PSP/Game/System and open it in Notepad where I saw along the top line a section that read "########oENABLESERIALPORT=0o###########
and knowing my Holux GPSlim240 used the serial port decided to edit the above line to read :
########oENABLESERIALPORT=1o###########
then save it back and re-try.... and hey presto !! I now get GPS State:ON !!!!!
BTW there is a little 'o' symbol infront and at the end of ENABLESERIALPORT=0 which hasn't copied across here so I have used a small letter 'o' to show. So do not cut and paste the above, just overwrite that "=0" with "=1" and everything will be fine.
I'm guessing the config.txt file in ver 0.5.20 is setup by default for the PSP290 and not the generic GPS receivers.
Hope this helps some others :)
I have a PSP1000 (TA079/081) with System Software 3.90 M33-2 loaded and Mapthis ver 0.5.20 and off line all is running fine.
However, whenever I attach the Holux 240 with the special GHPSP cable from PC-Mobile I don't get any satellite fix.
When I press the square button, it briefly flashes GPS Mode ON, but when I enter GPS Info it reads GPS STATE: OFF
I have googled and searched threads for answers and have run Chilly Willy Key Cleaner ver1.4 which reports all keys OK.
I have notived that when the USB cable to the PC is in, the GPS STATE changes to "Activating" but immediately reverts to OFF when I disconnect the cable.
I am really stuck and don't know what is the problem. Any help would be really, REALLY appreciated:thumbup:
Many thanks in advance folks !
Post Script : Now solved the GPS State:OFF
I decided with my (very) rudimentary skills to take a closer look at the config.txt file held in folder : PSP/Game/System and open it in Notepad where I saw along the top line a section that read "########oENABLESERIALPORT=0o###########
and knowing my Holux GPSlim240 used the serial port decided to edit the above line to read :
########oENABLESERIALPORT=1o###########
then save it back and re-try.... and hey presto !! I now get GPS State:ON !!!!!
BTW there is a little 'o' symbol infront and at the end of ENABLESERIALPORT=0 which hasn't copied across here so I have used a small letter 'o' to show. So do not cut and paste the above, just overwrite that "=0" with "=1" and everything will be fine.
I'm guessing the config.txt file in ver 0.5.20 is setup by default for the PSP290 and not the generic GPS receivers.
Hope this helps some others :)