Hoshimoto
July 21st, 2008, 09:03
Hello everyone,
I've had a phat PSP with Undiluted Platinum (UP) on it for sometime now. The UP seemed to work till 3.71 M33 without issues but any CFW there after seems to brick the UP. I've seen threads on this and fixing this is quite easy but in my case I don't have the USB connector to connect to UP's FPC cable to re-flash the UP NAND. The UP recovery menu does not show up either when starting PSP.
The PSP NAND (not the UP NAND) has a 3.71 original PSP firmware and was wondering how I can go about fixing my UP firmware problems. I'm going to Pandorize the PSP NAND but am still not sure how to recover my UP NAND. Any suggestions would be appreciated.
Is there a place or a list of what CFW are compatible with UP or any work around to get CFW above 3.71 M33 to work on UP (3.80 M33 to 4.01 M33).
Thank you.
I've had a phat PSP with Undiluted Platinum (UP) on it for sometime now. The UP seemed to work till 3.71 M33 without issues but any CFW there after seems to brick the UP. I've seen threads on this and fixing this is quite easy but in my case I don't have the USB connector to connect to UP's FPC cable to re-flash the UP NAND. The UP recovery menu does not show up either when starting PSP.
The PSP NAND (not the UP NAND) has a 3.71 original PSP firmware and was wondering how I can go about fixing my UP firmware problems. I'm going to Pandorize the PSP NAND but am still not sure how to recover my UP NAND. Any suggestions would be appreciated.
Is there a place or a list of what CFW are compatible with UP or any work around to get CFW above 3.71 M33 to work on UP (3.80 M33 to 4.01 M33).
Thank you.