argor
August 2nd, 2008, 01:07
from the pandora developer blog (http://www.openpandora.org/blog.php)
Just to catch up, here are some of the updates for July:
- Final AV connector has been selected. It has enough pins to support line level inputs and outputs, TV output, UART, power and some GPIOS. It has 14 pins but looks like a larger USB OTG port so it has a lot of strength for hanging cables off of it.
- The new analog nubs will be showcased on final pre-production PCBs in August. They are all black with 2mm of travel in each direction. They have a nice smooth travel, but no center click. It was debatable whether this feature would have been a pain due to accidental pressing anyway. The nubs have a large 15mm diameter disc with a concave surface. Their position in the Pandora has remained the same as before due to some constructive negotiations with the nub manufacturer.
- Wifi/BT is now integrated into the final pre-production PCB. Software testing will begin in August.
- Several emulators that run on the GP2X have been ported over to Pandora to show that they work and that everything you have come to enjoy up to this point will carry over with no trouble, and in many cases (where needed), run faster.
- Early testing of the battery at 500MHz, full screen brightness, audio section powered but not providing sound, and no power management has yielded 8.5 hours before the system shut down. A lot of software can run at slower speeds, plus screen brightness control and power management should make 10 hours an easy reality.
Just to catch up, here are some of the updates for July:
- Final AV connector has been selected. It has enough pins to support line level inputs and outputs, TV output, UART, power and some GPIOS. It has 14 pins but looks like a larger USB OTG port so it has a lot of strength for hanging cables off of it.
- The new analog nubs will be showcased on final pre-production PCBs in August. They are all black with 2mm of travel in each direction. They have a nice smooth travel, but no center click. It was debatable whether this feature would have been a pain due to accidental pressing anyway. The nubs have a large 15mm diameter disc with a concave surface. Their position in the Pandora has remained the same as before due to some constructive negotiations with the nub manufacturer.
- Wifi/BT is now integrated into the final pre-production PCB. Software testing will begin in August.
- Several emulators that run on the GP2X have been ported over to Pandora to show that they work and that everything you have come to enjoy up to this point will carry over with no trouble, and in many cases (where needed), run faster.
- Early testing of the battery at 500MHz, full screen brightness, audio section powered but not providing sound, and no power management has yielded 8.5 hours before the system shut down. A lot of software can run at slower speeds, plus screen brightness control and power management should make 10 hours an easy reality.