PDA

View Full Version : 5.00M33-6 with PSP290



yeayearite
February 13th, 2009, 22:00
The program starts up fine, everything runs fine, except the clock speed is set at 110mhz (unchangeable), and the gps status is off.

I checked that the fake-gps is off in the options txt, the connections are good.

Everything checks out, but it doesn't seem to work.

Any ideas?

Arxidon
February 13th, 2009, 23:51
Did the program work before you updated?
Or is this the first time you're trying out the GPS adapter?

binhusc
February 16th, 2009, 21:52
Wich version of MapThis! you're using?
I'm using the latest 05.20 with PSP-290 and they work fine to me.

Like I've downloaded I've put MapThis! in MS.

AlbertoZ
March 1st, 2009, 10:13
Hi all,

I just bough PSP-290 (togheter with Go!Explore)
but up to now I was not able to make it working
with my PSP. The receiver is not seen at all
by my PSP.

I've a fat PSP, Motherboard TA 79-81 (as seen by Keycleaner v 1.4), Custom firmware: 5.00 M33-6.
I serached in the various formus and it seems that
several people fixed this problem using keyCleaner
by fixing one specific key (#41). To me, the
program says "Congratulations, your key appear to be fine", i.e. nothing strange!
I reformatted the Memory Stick, nothing.

- I tried the PSP-290-TEST by deniska but it fails telling something like "usb bus error" and it exits.
- GO!Explore tells me "please insert GPS receiver"
- MapThis 0.5.2 shows "GPS state OFF" even if I
activate the PSP-290 flag in the configuration file.

It is worth saying that my USB port is fine, i.e. I can exchange data with my PC.

Any help to a (very) frustrated PSP-290 user :(?
Anyone had similar problems?

AlbertoZ

fischauge
March 1st, 2009, 15:41
Are you able to get another PSP? Maybe your receiver is broken. Try your Go explore on another PSP.

AlbertoZ
March 1st, 2009, 18:38
Hi fischauge, thanks for the sugestion.
Definitely I'll try anoher PSP, tomorrow (I'll let you know).

Regards,

AlbertoZ

gerardwayz
April 11th, 2009, 03:36
I have 5.00 M33-6 and i tried putting mapthis! 5.20 in GAME, GAME 150, GAME 380 and it doesn't show up on my psp game selection.

exodus1369
May 23rd, 2009, 13:55
yeayearite how did you load that i can't load it my psp i have the 5.00 m33-6 fw but can't load map this to it at all.

alkaline826
August 17th, 2010, 19:49
I have a psp with 5.00 m33-6 CFW I unpacked mapthis and loaded it into the files (GAME, GAME150, and GAME5XX) and the same thing always happens the program starts on the psp but after a couple of seconds it freezes and shuts down. WHAT CAN I DO? I need some help please. also my board is a TA-85. My project can't be completed without this .