wraggster
August 2nd, 2009, 22:20
Mplayer CE (http://wiibrew.org/wiki/MPlayer_CE) is a fork of the Team Twiizers MPlayer port, combining elements of MPlayerWii and GeeXboX.
Changelog
0.71
Autoload implemented. If the next file has a very similar name (using a Levenshtein distance of 2) it will be autoloaded.
Examples: film.part1.avi > film.part2.avi (1 change)
episode.s01e09.avi > episode.s01e10.avi works (2 changes)
Improved memory management: fixes MPlayer hanging if out of memory.
OSD level 3 now shows mem1 and mem2 info.
Driver improved with autodetection error: on error the device is reinitied and read is retried.
Restore Points fixed. Now quit or power off saves restore point and can resume properly. Please delete your previous restore_point file in case it is corrupted, and check that your SD card isn't locked.
Improved SMB connections: now SMB will always reconnect.
Improved stream initialisation.
Fixed green lines at the top of loading screen.
Further improved video compatibility
Added ability to load an external driver from SD for USB 2.0 testing. More details (and drivers) will be added to the Google Code page at a later date. Thanks to Hermes for the patch.
Finally fixed the problem with network and USB 2.0 conflicts (due to the driver using a bad device).
Font loading improved.
Improved MPlayer support when a file unexpectedly disappears and reappears.
Many other small fixes and code cleanup.
New USB test:
If http://mplayer-ce.googlecode.com/files/USB%20Test.rar says USB device is compatible but a device is not working then there is no FAT partition on the device. Check if you are using NTFS instead.
Download and Give Feedback Via Comments
Changelog
0.71
Autoload implemented. If the next file has a very similar name (using a Levenshtein distance of 2) it will be autoloaded.
Examples: film.part1.avi > film.part2.avi (1 change)
episode.s01e09.avi > episode.s01e10.avi works (2 changes)
Improved memory management: fixes MPlayer hanging if out of memory.
OSD level 3 now shows mem1 and mem2 info.
Driver improved with autodetection error: on error the device is reinitied and read is retried.
Restore Points fixed. Now quit or power off saves restore point and can resume properly. Please delete your previous restore_point file in case it is corrupted, and check that your SD card isn't locked.
Improved SMB connections: now SMB will always reconnect.
Improved stream initialisation.
Fixed green lines at the top of loading screen.
Further improved video compatibility
Added ability to load an external driver from SD for USB 2.0 testing. More details (and drivers) will be added to the Google Code page at a later date. Thanks to Hermes for the patch.
Finally fixed the problem with network and USB 2.0 conflicts (due to the driver using a bad device).
Font loading improved.
Improved MPlayer support when a file unexpectedly disappears and reappears.
Many other small fixes and code cleanup.
New USB test:
If http://mplayer-ce.googlecode.com/files/USB%20Test.rar says USB device is compatible but a device is not working then there is no FAT partition on the device. Check if you are using NTFS instead.
Download and Give Feedback Via Comments