wraggster
May 20th, 2010, 22:58
New from Divineo USA (http://www.divineo.com/php/affstart.php?affcode=arboretum&prod=hb-360-ck3p2)
http://www.divineo.com/divineo/images/products/hb-360-ck3p2-s.jpg
After the amazing success of the Xecuter LT Switch solution, Team Xecuter has launched the latest addition to the CK3 family of products the FIRST complete NO SOLDER solution for the newer Liteon DVD drives the CK3 Probe v2. This is targeted to installers who require a multi-use no solder solution to the new Liteon drives or to the users who simply dont have the skills to solder the cheaper LT switch alternative.
Still retaining the original CK3 Probe function of dumping the 74850 key, but now also enabling full firmware access of the new 83850V2 and 93450 drives you can easily switch between PROBE and LT Switch Modes A complete all-in-one solderless solution !
Liteon 74850 No Cuts Required No Rebuild PCB Required. Switch to original CK3 Probe Function for DVD Key Extraction
Liteon 83850V2 3 Small Trace Cuts (Same as LT Switch) No Rebuild PCB Required. Special Conductive Glue supplied with kit to easily repair the cuts (Enough for at least 10 DVD Drives) No Soldering !
Liteon 93450 3 Small Trace Cuts (Same as LT Switch) No Rebuild PCB Required. Special Conductive Glue supplied with kit to easily repair the cuts (Enough for at least 10 DVD Drives) No Soldering !
Installers can use this again and again and again and again No rebuild boards no soldering NO PROBLEM !
The CK3 Probe 2 connects to both the CK3 Lite and CK3 Pro connectivity kits and includes full status LEDs and an extra protection circuit against accidental shortages on the DVD PCB.
http://www.divineo.com/divineo/images/products/hb-360-ck3p2-s.jpg
After the amazing success of the Xecuter LT Switch solution, Team Xecuter has launched the latest addition to the CK3 family of products the FIRST complete NO SOLDER solution for the newer Liteon DVD drives the CK3 Probe v2. This is targeted to installers who require a multi-use no solder solution to the new Liteon drives or to the users who simply dont have the skills to solder the cheaper LT switch alternative.
Still retaining the original CK3 Probe function of dumping the 74850 key, but now also enabling full firmware access of the new 83850V2 and 93450 drives you can easily switch between PROBE and LT Switch Modes A complete all-in-one solderless solution !
Liteon 74850 No Cuts Required No Rebuild PCB Required. Switch to original CK3 Probe Function for DVD Key Extraction
Liteon 83850V2 3 Small Trace Cuts (Same as LT Switch) No Rebuild PCB Required. Special Conductive Glue supplied with kit to easily repair the cuts (Enough for at least 10 DVD Drives) No Soldering !
Liteon 93450 3 Small Trace Cuts (Same as LT Switch) No Rebuild PCB Required. Special Conductive Glue supplied with kit to easily repair the cuts (Enough for at least 10 DVD Drives) No Soldering !
Installers can use this again and again and again and again No rebuild boards no soldering NO PROBLEM !
The CK3 Probe 2 connects to both the CK3 Lite and CK3 Pro connectivity kits and includes full status LEDs and an extra protection circuit against accidental shortages on the DVD PCB.