USB 2.0 to 36 Pin IEEE 1284 Parallel Printer Cable

[wraggster]

New from Divineo China (http://www.divineo.cn/php/affstart.php?affcode=arboretum&prod=pc-1284)

http://www.divineo.cn/divineo/images/products/pc-1284-s.jpg

- Specifications, fully compatible with all parallel printers

- Fully Compliant with USB 1.1 and USB 2.0 and IEEE 1284

- Bi-directional parallel interface communication

- Up to 12 Mbps Data Transfer Rate

- Powered by USB port, no external power needed

- Support Windows 98/98SE/ME/2000/XP

- Cable length: 97cm

[TwoforTwo]

If the "receive data" or "print" message is frozen on the Brother machines LCD, follow these steps:
Press and hold the on/off key to turn off the machine, if the machine does not turn off when you press and hold the on/off key, unplug the machine from the electrical outlet.

[Dsuar2]

In addition to your post, I want to say that it's necessary to check your cartridge in this case because I had a problem when the print message was "frozen" and I checked my cartridge, and it was broken a little bit. I was forced to change it, I was googling for 3 hours and finally, according to reviews, I ordered a suitable variant from this place: https://www.mrdepot.ca/collections/hp-toner-cartridges. Please be careful when you will decide to change your cartridge, because if it won't be suitable to your printer by size, it's going to be a big disappointment.