wraggster
August 4th, 2010, 15:37
New from Divineo USA (http://www.divineo.com/php/affstart.php?affcode=arboretum&prod=hb-360-xtls2c)
http://www.divineo.com/divineo/images/products/hb-360-xtls2c-s.jpg
Xecuter have released the latest in their line of LT Switch Liteon DVD mod products, the LT Clip + LT Switch v2.
This kit has been designed with the beginner in mind. It's been in development for a while due to the absolute precision and stability needed to make sure it works for the the lifetime of the DVD Drive with no soldering or glue for trace repairs. There is even included a built in continuity tester to make sure your trace cuts are perfect !
Also Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)
This is the first and only Liteon solution where there is 100% No Soldering & No Glue - The fastest and easiest "MRA Hack" product on the market.
•The Only Liteon Solution Recommended By Team Jungle !
•Unique designed clip
•No Solder & No Glue
•External LT Switch
•Built in continuity tester to make sure your trace cuts are perfect
•Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
•Easy & Simple Install - Install Once & Forget
•Enable / Disable Switch
•Multi-R Switch (18, 20, 22 Ohms)
•On/Off LED
•Completely Undetectable
•No Need To Uninstall
•Works with ALL tools including the latest Jungle Flasher
http://www.divineo.com/divineo/images/products/hb-360-xtls2c-s.jpg
Xecuter have released the latest in their line of LT Switch Liteon DVD mod products, the LT Clip + LT Switch v2.
This kit has been designed with the beginner in mind. It's been in development for a while due to the absolute precision and stability needed to make sure it works for the the lifetime of the DVD Drive with no soldering or glue for trace repairs. There is even included a built in continuity tester to make sure your trace cuts are perfect !
Also Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)
This is the first and only Liteon solution where there is 100% No Soldering & No Glue - The fastest and easiest "MRA Hack" product on the market.
•The Only Liteon Solution Recommended By Team Jungle !
•Unique designed clip
•No Solder & No Glue
•External LT Switch
•Built in continuity tester to make sure your trace cuts are perfect
•Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
•Easy & Simple Install - Install Once & Forget
•Enable / Disable Switch
•Multi-R Switch (18, 20, 22 Ohms)
•On/Off LED
•Completely Undetectable
•No Need To Uninstall
•Works with ALL tools including the latest Jungle Flasher