bandit
December 4th, 2010, 13:18
http://psx-scene.com/tmp/psx-scene/pictures/e3-card.jpg
wi6s-W2gXKU
We got this news from our source and thought we would be the first to share it (site was down). You can also read our full review on the E3 Card Reader here (http://reviews.dcemu.co.uk/review-e3-card-reader-microsdhc-psgroove-348547.html). THIS WILL NOT WORK ON OTHER JAILBREAK DEVICES.
You can purchase your E3 Card Reader at Acekard.ca (http://www.acekard.ca/?AffId=6) (10% off - coupon code 10acekardca), LighTake (http://www.lightake.com/pmdetail.do/sku.E3_Card_Reader_Micro_SD_TF_Card_Reader_PS3_Don gle_with_128KB_Flash_-34184~C.IOOAM102312010ANEWC) (10% off - coupon code TJOOS), PriceAngels (http://shrsl.com/?~h8h), VolumeRates (http://www.volumerates.com/product/e3-card-reader-micro-sd-tf-card-reader-ps3-dongle-with-128kb-flash-94604~r.1288139925U4523) and MyGamingMart (http://www.mygamingcard.net/).
Dear friends,
Thank you for using E3card Reader PS3. Today we will bring you a big surprise: the E3-Downgrader for E3card Reader. Yes it's THE downgrader which can turn your 3.5 PS3 down to any version you wanted, i.e. the 3.41. It's no time limit, no PC software need to download, no need to write any emails, no need to wait and after all it's FREE. Yes, it's true. We can even proved that today it's not the day one of you need to go on board of some you know what ships, that of cause because we are Chinese. You can review the videos by click
http://www.youtube.com/watch?v=wi6s-W2gXKU, download the upgrade file by click here (http://e3diy.net/Download/e3downgrade%2012.03.rar) and download the 3.41 FW package by click here (http://www.sendspace.com/file/qlfoyi).
Password : iLoveE3
please note that it's case-sensitive.
If you have any questions, please feel free to contact us.
Best Regards
E3Diy Group
E-mail: [email protected]
How to downgrade firmware 3.42/3.50 or above to firmware 3.41 with E3 Card Reader :
Download and extract "e3downgrade_12.03.rar" to your computer
Insert E3 Card Reader into the USB port of your computer.
On your file browser, open "E3Upgrader"
Drag and drop .bin file from "e3downgrade_12.03.rar" into "E3Upgrader"
Red LED will flash. When you see the blue LED, that means the upgrade is successful and complete.
Remove E3 Card Reader from computer
Insert E3 Card Reader device that has been reprogrammed as downgrader into your console
Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up red LED followed by blue LED
Turn off system via menu
Remove E3 Card Reader dongle and turn on console to make sure you are in Factory Service Mode. You will see a huge red box on the screen saying Factory Service Mode.
Load any blank FAT32 USB flash drive device with 2 files in the root directory:
Modified 3.41 PUP
Lv2Diag.self (File 1)
These must be the only files on the USB key and must be placed in the main (root) directory.
Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
(Optional) – If you wish to downgrade to any older firmware you can follow step 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.
To go back to E3 Card Reader jailbreak device, just drag back the normal .bin files. - e3 card reader, new generation ps3 chip with mulit-function (http://e3card-china.com/Downloads.html)
Files can be downloaded at E3DIY (http://e3diy.net/)
wi6s-W2gXKU
We got this news from our source and thought we would be the first to share it (site was down). You can also read our full review on the E3 Card Reader here (http://reviews.dcemu.co.uk/review-e3-card-reader-microsdhc-psgroove-348547.html). THIS WILL NOT WORK ON OTHER JAILBREAK DEVICES.
You can purchase your E3 Card Reader at Acekard.ca (http://www.acekard.ca/?AffId=6) (10% off - coupon code 10acekardca), LighTake (http://www.lightake.com/pmdetail.do/sku.E3_Card_Reader_Micro_SD_TF_Card_Reader_PS3_Don gle_with_128KB_Flash_-34184~C.IOOAM102312010ANEWC) (10% off - coupon code TJOOS), PriceAngels (http://shrsl.com/?~h8h), VolumeRates (http://www.volumerates.com/product/e3-card-reader-micro-sd-tf-card-reader-ps3-dongle-with-128kb-flash-94604~r.1288139925U4523) and MyGamingMart (http://www.mygamingcard.net/).
Dear friends,
Thank you for using E3card Reader PS3. Today we will bring you a big surprise: the E3-Downgrader for E3card Reader. Yes it's THE downgrader which can turn your 3.5 PS3 down to any version you wanted, i.e. the 3.41. It's no time limit, no PC software need to download, no need to write any emails, no need to wait and after all it's FREE. Yes, it's true. We can even proved that today it's not the day one of you need to go on board of some you know what ships, that of cause because we are Chinese. You can review the videos by click
http://www.youtube.com/watch?v=wi6s-W2gXKU, download the upgrade file by click here (http://e3diy.net/Download/e3downgrade%2012.03.rar) and download the 3.41 FW package by click here (http://www.sendspace.com/file/qlfoyi).
Password : iLoveE3
please note that it's case-sensitive.
If you have any questions, please feel free to contact us.
Best Regards
E3Diy Group
E-mail: [email protected]
How to downgrade firmware 3.42/3.50 or above to firmware 3.41 with E3 Card Reader :
Download and extract "e3downgrade_12.03.rar" to your computer
Insert E3 Card Reader into the USB port of your computer.
On your file browser, open "E3Upgrader"
Drag and drop .bin file from "e3downgrade_12.03.rar" into "E3Upgrader"
Red LED will flash. When you see the blue LED, that means the upgrade is successful and complete.
Remove E3 Card Reader from computer
Insert E3 Card Reader device that has been reprogrammed as downgrader into your console
Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up red LED followed by blue LED
Turn off system via menu
Remove E3 Card Reader dongle and turn on console to make sure you are in Factory Service Mode. You will see a huge red box on the screen saying Factory Service Mode.
Load any blank FAT32 USB flash drive device with 2 files in the root directory:
Modified 3.41 PUP
Lv2Diag.self (File 1)
These must be the only files on the USB key and must be placed in the main (root) directory.
Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
(Optional) – If you wish to downgrade to any older firmware you can follow step 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.
To go back to E3 Card Reader jailbreak device, just drag back the normal .bin files. - e3 card reader, new generation ps3 chip with mulit-function (http://e3card-china.com/Downloads.html)
Files can be downloaded at E3DIY (http://e3diy.net/)