wraggster
October 30th, 2011, 17:44
Busy weekend, we have updated several tools for the wonderful releases of this weekend. There was an update for Samsung LT Plus (LTPlus 2.01) and also the LT-MAX firmware was released by c43, this LT-MAX firmware is for selected Liteon DVD Burners and now will allow full area write, even with verify, that will generate the most accurate 1:1 XGD3 copy ever thanks to c4e ! (Please note it require also selected dvd-r dl brands)
Also we spotted a bug affecting only Standalone users of previous release, please visit our blog to read more of the bug and how stay safe of it. This has been fixed on new release.
Below is a resume of what you need to update:
a) Update the Custom Fileset to 2.0c to get the Samsung LT 2.01 update (you can update from our blog or from the TBX check updates feature)
b) Update the SD Card Files if you use Standalone mode to get rid of the bug of previous release (download from our blog)
c) Update your Lizard to Gecko 1.26, this will add a new menu AFTER HITACHI menu called "XGD3 Burners" that will allow you read and write the firmware
d) Update Lizard Toolbox to version 1.44 that will allow you to send and receive (write/read) the 2MB files of the LT-MAX firmware binaries. (this update can be obtained from our download page or inside the TBX check updates feature)
Aside of all this updates you also need download the LT-MAX firmware package containing all firmwares for the selected liteon dvd burners in order to write to your burner. Please make sure you send the proper one to the burner.
Official Site: http://www.360lizard.com
Also we spotted a bug affecting only Standalone users of previous release, please visit our blog to read more of the bug and how stay safe of it. This has been fixed on new release.
Below is a resume of what you need to update:
a) Update the Custom Fileset to 2.0c to get the Samsung LT 2.01 update (you can update from our blog or from the TBX check updates feature)
b) Update the SD Card Files if you use Standalone mode to get rid of the bug of previous release (download from our blog)
c) Update your Lizard to Gecko 1.26, this will add a new menu AFTER HITACHI menu called "XGD3 Burners" that will allow you read and write the firmware
d) Update Lizard Toolbox to version 1.44 that will allow you to send and receive (write/read) the 2MB files of the LT-MAX firmware binaries. (this update can be obtained from our download page or inside the TBX check updates feature)
Aside of all this updates you also need download the LT-MAX firmware package containing all firmwares for the selected liteon dvd burners in order to write to your burner. Please make sure you send the proper one to the burner.
Official Site: http://www.360lizard.com