wraggster
May 10th, 2012, 13:12
The team behind the x360Glitchip is proud to announce the release of its dual nand addon called x360DNA.
This addon is coupled with a chip Glitch to take advantage of a dual boot Glitch / Xbox Live, or Glitch / Dev. Here are the functionalities of x360DNA v1: - No break trail for the EC, or on foot to lift the nand - Automatic management of disabling the chip x360Glitchip Glitch with v1.4 and v2.1 x360Glitchip - No unnecessary clip - A quicksolder quality for simple installation and robust For Slim (FAT For a wired installation is required) - Select super simple via the sync button - No buttons on the outside - Automatic Reset SMC Management - No unnecessary integrated SPI would increase the final price - The son and supplied pre-welded on the chip and a few exclusive functionalities: - Function Write protect the nand for the paranoid (Easily deactivated same console on) - function nand hot swap, to switch to nand without risk, even console turned on. (For expert) x360Glitchip Coupled with v2.1, you can choose to simply clean your nand nand on internal or external on the nand. Use ULTRA is simple. Console off: Press a button once sync , an LED lights on the ROL indicating you are on the external nand. Press again once the Sync button, the LED goes out again you switch on the internal NAND. The choice comes down to the nand So pressing the sync button, then press the power button to turn the console console lit: Press about 4s on the Sync button, an LED lights on the ROL, you can release. You just switch to STDBY: - If it is fixed is that you are on the external nand - If it flashes is that you are on the internal nand Simply pressing the Sync button makes you change nand hot. Press again to exit 4s STDBY. Please note, that in the mode STDBY the nands no longer write-protected. Coming out of fashion STDBY, they are again protected.
Official site: www.x360glitchip.com
This addon is coupled with a chip Glitch to take advantage of a dual boot Glitch / Xbox Live, or Glitch / Dev. Here are the functionalities of x360DNA v1: - No break trail for the EC, or on foot to lift the nand - Automatic management of disabling the chip x360Glitchip Glitch with v1.4 and v2.1 x360Glitchip - No unnecessary clip - A quicksolder quality for simple installation and robust For Slim (FAT For a wired installation is required) - Select super simple via the sync button - No buttons on the outside - Automatic Reset SMC Management - No unnecessary integrated SPI would increase the final price - The son and supplied pre-welded on the chip and a few exclusive functionalities: - Function Write protect the nand for the paranoid (Easily deactivated same console on) - function nand hot swap, to switch to nand without risk, even console turned on. (For expert) x360Glitchip Coupled with v2.1, you can choose to simply clean your nand nand on internal or external on the nand. Use ULTRA is simple. Console off: Press a button once sync , an LED lights on the ROL indicating you are on the external nand. Press again once the Sync button, the LED goes out again you switch on the internal NAND. The choice comes down to the nand So pressing the sync button, then press the power button to turn the console console lit: Press about 4s on the Sync button, an LED lights on the ROL, you can release. You just switch to STDBY: - If it is fixed is that you are on the external nand - If it flashes is that you are on the internal nand Simply pressing the Sync button makes you change nand hot. Press again to exit 4s STDBY. Please note, that in the mode STDBY the nands no longer write-protected. Coming out of fashion STDBY, they are again protected.
Official site: www.x360glitchip.com