splodger15
December 28th, 2006, 20:19
Here are some of the files you will need:
3.03 Eboot (http://www.psp-hacks.com/file/958)
Modified PSAR Dumper by Team C+D (http://www.psp-hacks.com/file/977)
PBP Unpacker (http://www.psp-hacks.com/file/97)
Devhook 52 (http://www.dcemu.co.uk/vbulletin/showthread.php?t=47272)
Copy the files inside MS_ROOT to the root of your memory stick.(The same place as the PSP folder is)
Use PBP Unpacker on a 3.03 Eboot and extract the DATA.PSAR file.And save it to somewere easy to find.
Copy the DATA.PSAR file to the root of your memory stick.
Copy the FW3.03 PSAR Dumper (released by Team C+D) into X:/PSP/GAME/. Where X is your drive letter
Run the PSAR Dumper on your PSP and press “X” or the “Cross” button when prompted to.
Alot of writing will appear on the screen.Dont worry about it.It is dumping the PSAR
Run DevHook v0.52 on your PSP.
Select Flash Install.
Select Setup firmware from PSAR dumper.
Read the disclaimer, and press O button if you agree with it.
Once it is done, go back to the main DevHook v0.52 screen.
Select Firmware.
Select Firmware 3.03.
Select Start.
Reboot the PSP.
Load DevHook v0.52 again and start FW3.03.
It should say that the setup information is corrupt (Blue Screen Of Death), just press O
Reboot the PSP.
Load DevHook v0.52 again and start FW3.03.
You should now be able to apply your personal settings to your PSP!
3.03 Eboot (http://www.psp-hacks.com/file/958)
Modified PSAR Dumper by Team C+D (http://www.psp-hacks.com/file/977)
PBP Unpacker (http://www.psp-hacks.com/file/97)
Devhook 52 (http://www.dcemu.co.uk/vbulletin/showthread.php?t=47272)
Copy the files inside MS_ROOT to the root of your memory stick.(The same place as the PSP folder is)
Use PBP Unpacker on a 3.03 Eboot and extract the DATA.PSAR file.And save it to somewere easy to find.
Copy the DATA.PSAR file to the root of your memory stick.
Copy the FW3.03 PSAR Dumper (released by Team C+D) into X:/PSP/GAME/. Where X is your drive letter
Run the PSAR Dumper on your PSP and press “X” or the “Cross” button when prompted to.
Alot of writing will appear on the screen.Dont worry about it.It is dumping the PSAR
Run DevHook v0.52 on your PSP.
Select Flash Install.
Select Setup firmware from PSAR dumper.
Read the disclaimer, and press O button if you agree with it.
Once it is done, go back to the main DevHook v0.52 screen.
Select Firmware.
Select Firmware 3.03.
Select Start.
Reboot the PSP.
Load DevHook v0.52 again and start FW3.03.
It should say that the setup information is corrupt (Blue Screen Of Death), just press O
Reboot the PSP.
Load DevHook v0.52 again and start FW3.03.
You should now be able to apply your personal settings to your PSP!