mnuhaily22
January 19th, 2007, 05:34
Easy Downgrader by mnuhaily22
First of all I would like to thank ADePSP for his PSP Installer v0.1, because without that, this would have been exetremely
difficult to put together.
Step #1... Click on the application by the name of "Install".
Step #2... Wait a secound untill it detects your PSP.
Step #3... Click "Install", it should be a greyish button under a PSP that says 2.80 easy downgrader.
Step #4... Wait about a minute or too until it gives you a message that it is done.
From there simply follow these steps from your PSP
- Run 2.80 HEN from the photos area if you are not already running it.
-Just to notify you guys, Hen is unstable, and you may have to run it a few times befor you get a blue screen, then the PSP
is rebooted by itself.
- If running a ta-082 PSP execute the 2.80 idstorage changer. It needs 75% battery.
It will change some keys of your idstorage needed to downgrade the ta-082.
- The program will exit to the XMB. Now execute the generic downgrade, which will show in the xmb
as "Update X.YX" in the psp language.
- The generic downgrader will also need 75% battery. IT will downgrade your psp to 1.50.
- At the end, it will ask you to press X to restart the psp. Do it.
- If all went fine, you'll receive a blue screen telling you to press O. Do it, and reenter your settings.
Welcome to 1.50.
- If things didn't go that fine, you'll have a non-functional psp, aka brick.
You accepted that risk, remember.
Thanks to Dark_AleX/Mathieulh/Harleyg for making the original downgrader, and thanks to Noobz for porting it to 2.80,
and thanks to me(mnuhaily22) for making the easy downgrader!!!
I am not responsible for any bricks or damaged PSP's, remember that.
I added a little pic that would tell you if you have a ta-082 or not.
First of all I would like to thank ADePSP for his PSP Installer v0.1, because without that, this would have been exetremely
difficult to put together.
Step #1... Click on the application by the name of "Install".
Step #2... Wait a secound untill it detects your PSP.
Step #3... Click "Install", it should be a greyish button under a PSP that says 2.80 easy downgrader.
Step #4... Wait about a minute or too until it gives you a message that it is done.
From there simply follow these steps from your PSP
- Run 2.80 HEN from the photos area if you are not already running it.
-Just to notify you guys, Hen is unstable, and you may have to run it a few times befor you get a blue screen, then the PSP
is rebooted by itself.
- If running a ta-082 PSP execute the 2.80 idstorage changer. It needs 75% battery.
It will change some keys of your idstorage needed to downgrade the ta-082.
- The program will exit to the XMB. Now execute the generic downgrade, which will show in the xmb
as "Update X.YX" in the psp language.
- The generic downgrader will also need 75% battery. IT will downgrade your psp to 1.50.
- At the end, it will ask you to press X to restart the psp. Do it.
- If all went fine, you'll receive a blue screen telling you to press O. Do it, and reenter your settings.
Welcome to 1.50.
- If things didn't go that fine, you'll have a non-functional psp, aka brick.
You accepted that risk, remember.
Thanks to Dark_AleX/Mathieulh/Harleyg for making the original downgrader, and thanks to Noobz for porting it to 2.80,
and thanks to me(mnuhaily22) for making the easy downgrader!!!
I am not responsible for any bricks or damaged PSP's, remember that.
I added a little pic that would tell you if you have a ta-082 or not.