wraggster
November 17th, 2012, 17:24
http://hackadaycom.files.wordpress.com/2012/11/eve.jpg?w=450&h=95
The Raspberry Pi is an excellent tool to build the ‘Internet of things’ we’ve been hearing about, but there’s still the issue of connecting the Raspi to other devices. The EVE Alpha (http://www.kickstarter.com/projects/ciseco/eve-alpha-raspberry-pi-wireless-development-hardwa) – a breakout board for several wireless radio modules for the Raspberry Pi – hopes to change that with their Kickstarter campaign.
The idea behind the EVE is to provide a link between low-power radio modules found in a few of the microcontroller projects we’ve seen and the Raspberry Pi. It does this by simply serving as a breakout board, taking the GPIO pins on the Raspi and connecting them to solder pads for a few of the many radio modules currently available.
Already the EVE supports the RFM12B wireless tranciever (https://www.sparkfun.com/products/9582), a Z-Wave module (http://www.z-wave.com/modules/AboutZ-Wave/), 868-915Mhz SRF modules, and has a breakout for an XBee module, allowing the EVE to communicate using one of the many different XBee boards (http://www.digi.com/xbee/). There’s also a battery-backed real-time clock and temperature sensor thrown in for good measure making this board the perfect building block for an outdoor weather station or solar array.
It’s an awesome idea, and if you already have a few radio modules, incredibly cheap; just the PCB is only £6, and a board with all the SMD components is only £20.
http://hackaday.com/2012/11/17/eve-radio-breakout-board-for-the-raspberry-pi/
The Raspberry Pi is an excellent tool to build the ‘Internet of things’ we’ve been hearing about, but there’s still the issue of connecting the Raspi to other devices. The EVE Alpha (http://www.kickstarter.com/projects/ciseco/eve-alpha-raspberry-pi-wireless-development-hardwa) – a breakout board for several wireless radio modules for the Raspberry Pi – hopes to change that with their Kickstarter campaign.
The idea behind the EVE is to provide a link between low-power radio modules found in a few of the microcontroller projects we’ve seen and the Raspberry Pi. It does this by simply serving as a breakout board, taking the GPIO pins on the Raspi and connecting them to solder pads for a few of the many radio modules currently available.
Already the EVE supports the RFM12B wireless tranciever (https://www.sparkfun.com/products/9582), a Z-Wave module (http://www.z-wave.com/modules/AboutZ-Wave/), 868-915Mhz SRF modules, and has a breakout for an XBee module, allowing the EVE to communicate using one of the many different XBee boards (http://www.digi.com/xbee/). There’s also a battery-backed real-time clock and temperature sensor thrown in for good measure making this board the perfect building block for an outdoor weather station or solar array.
It’s an awesome idea, and if you already have a few radio modules, incredibly cheap; just the PCB is only £6, and a board with all the SMD components is only £20.
http://hackaday.com/2012/11/17/eve-radio-breakout-board-for-the-raspberry-pi/