wraggster
December 9th, 2012, 22:40
Rogero release a new version of its new custom with the main problems the disappearance of corrupted data and the ability to install pkg.
For users who SingStar icon in the XMB, note that this is simply due to 4.30/4.31 original file. It seems that only European users that connect their console to the Internet have this icon. This custom has been tested on many models of PS3 and no problems were encountered. every custom But you need to install carefully and following recommendations. Nobody can be held responsible. This custom can be installed from the XMB on any OFW3.55/CFW3.55/CFW4.21/CFW4.30. 's new / fixed: - Rebuilt from scratch using only files with OFW 4.30 Official XMB and all options for a 4.30 official (no files DEX / SEX used) - All known problems, such as sorting and XMB icons problems Demo mode from previous versions are now solved the use of official XMB - Redesigned structure to match a custom OFW 4.30 - More errors given corrupted during an update from the XMB or Recovery - This custom can be installed from the XMB n ' any OFW3.55/CFW3.55/CFW4.21/CFW4.30 - The hard drive can be changed, reinstalling the custom will be no problem - Lv1 patched to disable the protections Lv2 - Lv1 patched to add the Peek / Poke to replace syscall 182/183 (Direct Disc Access Multiman now works fine with 4.21/4.30 CFW v2.00) - LV1 patched to disable integrity checks of the system (to avoid the brick console or not dehashée downgraded) - LV1 patched to disable the Core OS checks (to avoid non dehashée brick console or downgraded) - patched to add the LV2 peek / poke (LV1 and LV2 for) - VSH ReActPSN patched to enable (allows files act.dat and *. rif unsigned. Disables Unlinking / Deleting act.dat) - Spoof version 4.31 - PSN / SEN is available as the "passphrase" remains the same - Loading games from the icon is app_home now fixed - Launch games without signed until version 4.30 Eboot / SPRX - Games can be launched from the disk icon (with original BD game) and since app_home (disc-less, but does not all games) - Homebrew 3.55 can not be launched, they must be resigned - This custom can be used directly with a hardware flasher downgrade. Flash from the FSM or work out - This custom patch to the noBD / noBT to allow installation from a console player with bluetooth or nonfunctional - New application "Install Package Files" added to the XMB instead of that of Dex version, for a 100% original XMB -> Ps3 Once started, select the [app_home/PS3_GAME], it will change to [* Install Package Files] -> Once the game since launch Multiman, the console will return to the XMB and the game will be displayed in the same icon -> After loading a game, turn off the ps3 for [* Install Package Files] back in the XMB - You can otherwise install Application of standalone Deank to have permanently from the XMB -> It supports: -> Up to 256 files pkg -> Cutting pkg files -> Tri -> Indication of the file waiting pkg (red) -> An indication of the multi-part pkg (yellow) -> progression when transferring or copying -> Scanned files are: / * dev_usb ** / dev_hdd0 / dev_bdvd in / PKG / packages and root devices -> The file size is cut: .0 - .63 / .66600 - .66663 / .001 - .064 - MD5: 5f7434a46f7909689b00558a06071689 CAUTION: - This CFW has the LV1 checks disabled and can be installed on downgraded console, even if you have not done a "Dehash / Reset" Syscon properly. - Always dump NOR / NAND using Multiman or memdump (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=455) before install this CFW to have a dump where bricks. Having a valid dump NOR / NAND is an essential step prior to an update, you will always have a way to recover (using a hardware flasher) when you have a valid dump. A flash hardware alone without a valid dump can not fix a PS3 Bricke. - The QA Flag (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=454) should always be enabled on a PS3 for safety during a shift or a downgrade. - Check the MD5 the downloaded file. - Do not have a disc in the PS3, the console would update the disk first - You must be 3.55OFW or 3.55CFW/4.21CFW/4.30CFW to install. Installing it from any OFW above 3.55 does not work. downgrade to the 3.55 is still possible: - Download the "Downgrade PUP" (176MB, MD5: 49d80e07fc1f5ca1b0840e02e94635db) - Rename the file "PS3UPDAT.PUP "and put it on a USB" USB \ PS3 \ UPDATE \ PS3UPDAT.PUP " - Under "Rogero CFW 4.30", go to System Update from the XMB and install the update - After installation, the console is hybrid CFW 3.55, so it always displays in ver4.21/4.30 settings - Downloaded the QA Flag (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=454) - Install and run the two or three beeps should be heard. To verify proper operation, go to network settings without going in and do the combo (L1 + L2 + L3 + R1 + R2 + pad_bas (hold each button)) - set "Rogero CFW 3.55 CEX-V3.7" on a key USB "USB \ PS3 \ UPDATE \ PS3UPDAT.PUP" - Start the installation from the recovery menu (do not install from the XMB) - Start the installation from the recovery menu of any official firmware for it make a dehash (3.55/4.21/4.30 (only the 3.55 firmware allows you to install a custom firmware)) You can use CondorStrike's Updater package (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=427) from the XMB to enter the Recovery Console from a memory with Nor. official website: tortuga-cove . com (http://www.tortuga-cove.com/forums/viewtopic.php?f=127&t=4137)
http://ps3.gx-mod.com/modules/news/article.php?storyid=3174
For users who SingStar icon in the XMB, note that this is simply due to 4.30/4.31 original file. It seems that only European users that connect their console to the Internet have this icon. This custom has been tested on many models of PS3 and no problems were encountered. every custom But you need to install carefully and following recommendations. Nobody can be held responsible. This custom can be installed from the XMB on any OFW3.55/CFW3.55/CFW4.21/CFW4.30. 's new / fixed: - Rebuilt from scratch using only files with OFW 4.30 Official XMB and all options for a 4.30 official (no files DEX / SEX used) - All known problems, such as sorting and XMB icons problems Demo mode from previous versions are now solved the use of official XMB - Redesigned structure to match a custom OFW 4.30 - More errors given corrupted during an update from the XMB or Recovery - This custom can be installed from the XMB n ' any OFW3.55/CFW3.55/CFW4.21/CFW4.30 - The hard drive can be changed, reinstalling the custom will be no problem - Lv1 patched to disable the protections Lv2 - Lv1 patched to add the Peek / Poke to replace syscall 182/183 (Direct Disc Access Multiman now works fine with 4.21/4.30 CFW v2.00) - LV1 patched to disable integrity checks of the system (to avoid the brick console or not dehashée downgraded) - LV1 patched to disable the Core OS checks (to avoid non dehashée brick console or downgraded) - patched to add the LV2 peek / poke (LV1 and LV2 for) - VSH ReActPSN patched to enable (allows files act.dat and *. rif unsigned. Disables Unlinking / Deleting act.dat) - Spoof version 4.31 - PSN / SEN is available as the "passphrase" remains the same - Loading games from the icon is app_home now fixed - Launch games without signed until version 4.30 Eboot / SPRX - Games can be launched from the disk icon (with original BD game) and since app_home (disc-less, but does not all games) - Homebrew 3.55 can not be launched, they must be resigned - This custom can be used directly with a hardware flasher downgrade. Flash from the FSM or work out - This custom patch to the noBD / noBT to allow installation from a console player with bluetooth or nonfunctional - New application "Install Package Files" added to the XMB instead of that of Dex version, for a 100% original XMB -> Ps3 Once started, select the [app_home/PS3_GAME], it will change to [* Install Package Files] -> Once the game since launch Multiman, the console will return to the XMB and the game will be displayed in the same icon -> After loading a game, turn off the ps3 for [* Install Package Files] back in the XMB - You can otherwise install Application of standalone Deank to have permanently from the XMB -> It supports: -> Up to 256 files pkg -> Cutting pkg files -> Tri -> Indication of the file waiting pkg (red) -> An indication of the multi-part pkg (yellow) -> progression when transferring or copying -> Scanned files are: / * dev_usb ** / dev_hdd0 / dev_bdvd in / PKG / packages and root devices -> The file size is cut: .0 - .63 / .66600 - .66663 / .001 - .064 - MD5: 5f7434a46f7909689b00558a06071689 CAUTION: - This CFW has the LV1 checks disabled and can be installed on downgraded console, even if you have not done a "Dehash / Reset" Syscon properly. - Always dump NOR / NAND using Multiman or memdump (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=455) before install this CFW to have a dump where bricks. Having a valid dump NOR / NAND is an essential step prior to an update, you will always have a way to recover (using a hardware flasher) when you have a valid dump. A flash hardware alone without a valid dump can not fix a PS3 Bricke. - The QA Flag (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=454) should always be enabled on a PS3 for safety during a shift or a downgrade. - Check the MD5 the downloaded file. - Do not have a disc in the PS3, the console would update the disk first - You must be 3.55OFW or 3.55CFW/4.21CFW/4.30CFW to install. Installing it from any OFW above 3.55 does not work. downgrade to the 3.55 is still possible: - Download the "Downgrade PUP" (176MB, MD5: 49d80e07fc1f5ca1b0840e02e94635db) - Rename the file "PS3UPDAT.PUP "and put it on a USB" USB \ PS3 \ UPDATE \ PS3UPDAT.PUP " - Under "Rogero CFW 4.30", go to System Update from the XMB and install the update - After installation, the console is hybrid CFW 3.55, so it always displays in ver4.21/4.30 settings - Downloaded the QA Flag (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=454) - Install and run the two or three beeps should be heard. To verify proper operation, go to network settings without going in and do the combo (L1 + L2 + L3 + R1 + R2 + pad_bas (hold each button)) - set "Rogero CFW 3.55 CEX-V3.7" on a key USB "USB \ PS3 \ UPDATE \ PS3UPDAT.PUP" - Start the installation from the recovery menu (do not install from the XMB) - Start the installation from the recovery menu of any official firmware for it make a dehash (3.55/4.21/4.30 (only the 3.55 firmware allows you to install a custom firmware)) You can use CondorStrike's Updater package (http://ps3.gx-mod.com/modules/mydownloads/visit.php?lid=427) from the XMB to enter the Recovery Console from a memory with Nor. official website: tortuga-cove . com (http://www.tortuga-cove.com/forums/viewtopic.php?f=127&t=4137)
http://ps3.gx-mod.com/modules/news/article.php?storyid=3174