bandit
February 16th, 2007, 00:56
News from Team Cyclops (http://www.teamcyclops.com/news.html):
Important Announcement
It has come to our attention that a limited number of Cyclowiz units from the latest batch have an issue which will disable functionality. Due to a problem at the PCB factory, the A, B and C points of the CycloWiz are connected together. Unfortunately, some of them were already shipped to customers. All customers should verify that they do not have one of the affected Cyclowiz before installing their chip.Please refer to our identification guide below.
We offer a free replacement for each defective unit through our retailer network. Should you have a defective unit, please contact your retailer to arrange replacement immediately.
Those who do not wish to wait for a replacement unit can try to fix the chip by themselves, should they so desire, using this tutorial (http://www.teamcyclops.com/fixtutorial.pdf). Should you wish to try this method but are ultimately unsuccessful, we'll replace the chip even if it's damaged during the modification procedure.
We will also offer free replacements with D2B chipset support for people who have a D2B console and a CycloWiz from an the first batch which doesn't support D2B chipset. If your chip came in a branded CycloWiz ESD bag, it means that it already supports the D2B chipset.
We apologize for the inconvenience caused to those affected. Customer satisfaction is very important to us, we'll make sure this kind of problem won't happen again. Should you have any questions, feel free to contact: [email protected]
http://www.teamcyclops.com/problemsmall.jpg (http://www.teamcyclops.com/problembig.jpg)
Be sure to check out our Official CycloWiz / WiiKey / Wiinja Modchip Reseller/Installer List (http://www.dcemu.co.uk/vbulletin/showthread.php?t=51085).
Important Announcement
It has come to our attention that a limited number of Cyclowiz units from the latest batch have an issue which will disable functionality. Due to a problem at the PCB factory, the A, B and C points of the CycloWiz are connected together. Unfortunately, some of them were already shipped to customers. All customers should verify that they do not have one of the affected Cyclowiz before installing their chip.Please refer to our identification guide below.
We offer a free replacement for each defective unit through our retailer network. Should you have a defective unit, please contact your retailer to arrange replacement immediately.
Those who do not wish to wait for a replacement unit can try to fix the chip by themselves, should they so desire, using this tutorial (http://www.teamcyclops.com/fixtutorial.pdf). Should you wish to try this method but are ultimately unsuccessful, we'll replace the chip even if it's damaged during the modification procedure.
We will also offer free replacements with D2B chipset support for people who have a D2B console and a CycloWiz from an the first batch which doesn't support D2B chipset. If your chip came in a branded CycloWiz ESD bag, it means that it already supports the D2B chipset.
We apologize for the inconvenience caused to those affected. Customer satisfaction is very important to us, we'll make sure this kind of problem won't happen again. Should you have any questions, feel free to contact: [email protected]
http://www.teamcyclops.com/problemsmall.jpg (http://www.teamcyclops.com/problembig.jpg)
Be sure to check out our Official CycloWiz / WiiKey / Wiinja Modchip Reseller/Installer List (http://www.dcemu.co.uk/vbulletin/showthread.php?t=51085).