wraggster
February 15th, 2013, 14:54
via http://x360.gx-mod.com/modules/news/article.php?storyid=4142
Today the Maximus team updates all the tools to make a generation Lizard correct firmware LTU. They also prepared the FileSet 1.0 LTU requested for the process.
To update, there are two choices, the easy way or the ToolBox manual way step by step explained in the guide included in the archive (the last steps of this guide explains how to generate a LTU). addition, a large thanks to Geremia for the active patch MKT drive semi-open, this will provide you insert the disc to enter 0800 MKT mode the next time you want to update (with TX PCB LTU, you will always need this disk the first time since it comes pre-flashed with the original C4eva LTU). C4eva The team hopes that will implement this feature in a forthcoming update. MKT mode To enter the once Geremia patch applied, all this you need to do is power the drive with the tray half open (or bare pcb without the mechanism connected). The patch also solves a security problem PC23. If you do not want to use the ToolBox, otherwise generate the firmware then apply the patch in the archive. Thanks the-green. ToolBox 1.0.57 Lizard (http://x360.gx-mod.com/modules/mydownloads/visit.php?lid=494) Lizard Firmware Updater (http://x360.gx-mod.com/modules/mydownloads/visit.php?lid=492) Official website: 360lizard . com (http://360lizard.com/website/downloads.php)
Today the Maximus team updates all the tools to make a generation Lizard correct firmware LTU. They also prepared the FileSet 1.0 LTU requested for the process.
To update, there are two choices, the easy way or the ToolBox manual way step by step explained in the guide included in the archive (the last steps of this guide explains how to generate a LTU). addition, a large thanks to Geremia for the active patch MKT drive semi-open, this will provide you insert the disc to enter 0800 MKT mode the next time you want to update (with TX PCB LTU, you will always need this disk the first time since it comes pre-flashed with the original C4eva LTU). C4eva The team hopes that will implement this feature in a forthcoming update. MKT mode To enter the once Geremia patch applied, all this you need to do is power the drive with the tray half open (or bare pcb without the mechanism connected). The patch also solves a security problem PC23. If you do not want to use the ToolBox, otherwise generate the firmware then apply the patch in the archive. Thanks the-green. ToolBox 1.0.57 Lizard (http://x360.gx-mod.com/modules/mydownloads/visit.php?lid=494) Lizard Firmware Updater (http://x360.gx-mod.com/modules/mydownloads/visit.php?lid=492) Official website: 360lizard . com (http://360lizard.com/website/downloads.php)