Log in

View Full Version : DS Mouse v0.3 A Updated



wraggster
April 30th, 2007, 23:20
Dankredues (http://palib.info/forum/modules/newbb/viewtopic.php?forum=28&post_id=18299#forumpost18299) has updated his app that lets you use your DS as a mouse on a PC:

heres whats new:


Now DS Mouse only uses the port 111.
Also there is no need for recompilation. Just type in your ip at DS Mouse startup.
For clicking use the "A" Button.
Server app in english.

Download and Give feedback Via Comments

DanTheManMS
May 1st, 2007, 02:05
It's alright, though it only uses a portion of my desktop and I can't use my regular mouse at the same time. Good start though.

AXYPB
September 19th, 2007, 00:43
This doesn't seem to work for the R4DS; it goes blank immediately after launching.

ButterBeer121
September 19th, 2007, 01:44
It doesn't go blank on my R4, but it still won't do anything after I input my IP. What version are you using? I'm on 1.10.

EDIT: Never mind, it's not working. I'm gonna try it on my GnM.

AXYPB
September 19th, 2007, 01:52
I use 1.11. I don't even get the screen to type the IP.

ButterBeer121
September 19th, 2007, 02:03
I was getting to that screen earlier, but now its not working and I don't know what I did differently.

EDIT: Now all of the sudden it's working again. :P I'll try to find out what I'm doing differently.

EDIT2: Got past the IP screen, and it's working great, but I think it's either lagging or it froze.

Seven7
September 19th, 2007, 02:10
It works on my R4, v1.11, though i can't get it to actually work.

That is, the program on my DS runs fine, the capture program on my pc runs fine, but the 2 dont seem to be communicating proprely.

-Seven7-

ButterBeer121
September 19th, 2007, 02:19
Sounds like you got your IP address wrong or maybe a firewall is blocking it. Turn off all of your firewalls. What is your IP?

Seven7
September 19th, 2007, 02:38
Under ipconfig it gives me 192.168.1.100, which is a generic ip for the network im useing.

Is there another ipconfig command i can use to locate something abit more specific?

-Seven7-

edit: I already turned my firewall off.

Dagangstah
September 19th, 2007, 02:53
So this is like a free graphic tablet or something?

Seven7
September 19th, 2007, 03:37
when it works, probrably. I can't get it to work just yet, so I couldn't tell ya.

-Seven7-

ButterBeer121
September 19th, 2007, 03:40
Under ipconfig it gives me 192.168.1.100, which is a generic ip for the network im useing.

Is there another ipconfig command i can use to locate something abit more specific?

-Seven7-

edit: I already turned my firewall off.
Why kind of router are you using? I don't think it will work if you're using a USB Wi-Fi connector. Try entering 192.168.1.1 into your web browser to access your router settings, and forward port 111.



So this is like a free graphic tablet or something?
Yeah, but it's not perfect yet. For me it freezes after about 30 seconds, and it randomly freezes upon startup.

Pacmandu
October 18th, 2007, 04:57
Under ipconfig it gives me 192.168.1.100, which is a generic ip for the network im useing.

Is there another ipconfig command i can use to locate something abit more specific?

-Seven7-

edit: I already turned my firewall off.
To see more ip addresses and other stuff type "ipconfig /all" in command prompt just w/o the quotes

hope this helps.

stebob101
October 20th, 2007, 16:41
This doesnt work for me, i enter my ip, then it says Out:50/50C

any ideas?

strikerzex911
January 2nd, 2008, 22:15
Why does it go blank?

Skill
January 4th, 2008, 02:21
Although the link given in this forum does not extract all the file properly I manage to Install it fine.

One problem.

The application worked briefly for me, than it froze.


I managed to move the mouse cursor on the Ds once, and seen the cursor respon on my PC screen than it froze.

Needs lot of improvement otherwise it is a neat app.

fojackorocks
March 13th, 2008, 20:28
it just says
Out 50/50c

SandaimeSpaceMan
March 18th, 2008, 03:39
yes, it shows out 50/50c

OddFacade
April 27th, 2008, 01:41
It works for me, but the axis is shifted so that I can't use the mouse on the bottom 1.5" of my screen, nor the right 1" of my screen (computer screen, that is). Also, I can't hold A and drag a program or an icon. It'd be great for L to be a clicker, and the up button on the D-pad to be a right-click. This is great for simple tasks, but only to that specified area of the axis, but it does only basic mouse tasks... more basic than the most basic of mouse tasks, anyway.

natman3400
May 4th, 2008, 21:47
my capture doesnt work

Bballchamp23
June 15th, 2008, 22:13
mine keeps freezing as soon as I start it up. help? I'm using an R4 card

Radwen
June 22nd, 2008, 18:42
Still working on the project?

Everything works fine here (although a few blank screens at start, but it started working once I had a valid wifi connection).

Except it freezes (or the connection dies out) after 30 seconds or so.

ilikegames999
August 27th, 2008, 22:05
i cant get it to work

shifty149
August 30th, 2008, 00:50
I put my Ip code in but it says out:50/50c at the top what do i do

bafantoculo
December 8th, 2008, 00:52
same problem for me. out:50/50c

I8AB2Day
February 23rd, 2009, 16:24
It works perfectly for me on my iTouch DS. It's a bit laggy and the bottom inch or two of my computer screen cannot be accessed by the DS. If I go to the very top of my touch screen, I get to the very bottom of the computer screen, so use that to change between windows.

davidfanner
March 9th, 2009, 18:30
how do i download it help plz !!!

davidfanner
March 10th, 2009, 17:45
How Do I Download It Reply Please

darkluiside
April 23rd, 2009, 00:10
It Dsent Work On Gnm I Aready Try It

quintenv
May 19th, 2009, 18:30
i have a ttds card but it doesnt work on that

matthewbauer
May 29th, 2009, 05:31
Is it possible to run this in Wine on Linux? Are there any DS mice adapters for Linux?

FLAMEBOYREDO
June 19th, 2009, 19:58
i get Out:50/50C too, i'm using a PMP (if you even heard of this cart)and thats all i get. reply plz :)

holmzito
July 10th, 2009, 05:22
I'm using a DS Edge card and I get the same 50/50C error everyone else is getting.