PDA

View Full Version : C4E's LTU2 Firmware for all Liteon DG-16D4S !



wraggster
September 8th, 2013, 22:54
C4E has listened to the many requests from users who have DG-16D4S drives and have no fw dump leaving them dead in the water. Until now.
From the nfo:

C4E's iXtreme LTU2 (DG-16D4S) in association with Team Jungle & Team Xecuter
—————————————————————————-
Official release of the iXtreme LTU2 for Team Xecuter LTU2 PCB (DG-16D4S)
As requested I have compiled the LTU2 firmware to now also work with Liteon DG-16D4S Drives
The Liteon LTU2 PCB will fit in both the D4S and D5S drive chassis of course.
- Support for all Liteon DG-16D4S 0225/0272/0401/1071
- No need for firmware dump of source drive. Requires dvdkey and J-Runner data
- Supports enhanced topology data if present for more accurate topology responses (Future ABGX support)
This firmware is uniquely written for the TX LTU2 board. Use the latest Jungle Flasher.
Thanks go to Team Xecuter & Team Jungle and all testers for their hard work and efforts in the development process.
Xbox One! Bring it on!
Thanks to everyone for the fun over the years! – C4E
SEPTEMBER 6TH 2013
LTU2-0225-v1.0.bin
MD5: 04F59E2843FDE513895986CE510E73A6
LTU2-0272-v1.0.bin
MD5: 4078859613FD83FD4EACCABBB421B91A
LTU2-0401-v1.0.bin
MD5: 2922147CDB267A4B9CEDC46FE08463B6
LTU2-1071-v1.0.bin
MD5: 2CB8CE453CA7A106A5EA2D433189944D
PS: I read some post by a Brazilian guy who claimed that you will be banned with LTU2. I wonder if it's the same
Brazilian guy who threatened to release this bullshit information if he didn't get a good deal on LTU2 boards?
In a butshell, don't listen to these idiots.

http://team-xecuter.com/c4es-ltu2-firmware-for-all-liteon-dg-16d4s/