wraggster
September 23rd, 2013, 22:06
http://hackadaycom.files.wordpress.com/2013/09/pinmame.jpg?w=300&h=326
By now you should be familiar with MAME arcade cabinets and their ability to emulate any classic arcade machine from the days of yore. PinMAME is a similar setup to reconstruct classic pinball machines on computer monitors, but its popularity is nothing compared to the machines that play everything from Galaga to The Simpson’s arcade game. We won’t speculate on the reasons for that, but we do know how to make pinball emulation awesome – you need to emulate the buzzing and 60 Hz hum of solenoids found in the original machines.
This project comes from [Brendan Schrader] of the Hive76 hackerspace (http://www.hive76.org/) in Philly. It gives emulated pinball machines the tactile and haptic feedback required for a proper PinMAME setup. Inside [Brendan]‘s box are two monitors, one for the backglass and one for the playfield, and a small computer to run the PinMAME software.
Also in the box are a few transducers usually used to turn any flat solid surface into a speaker. [Brendan] sent the audio output from the pinball emulation to a set of speakers and the ‘mechanical sounds’ audio to the transducer mounted to the chassis. The difference between haptic feedback and no haptic feedback is amazing, and something every PinMAME setup desperately needs.
Unfortunately, [Brendan] says he lives a decade in the past and doesn’t do the whole interwebs and email thing. He tells us he’ll send in a build log in a week or so, and we’ll put that up when it comes in.
http://hackaday.com/2013/09/22/how-to-make-pinmame-awesome/
By now you should be familiar with MAME arcade cabinets and their ability to emulate any classic arcade machine from the days of yore. PinMAME is a similar setup to reconstruct classic pinball machines on computer monitors, but its popularity is nothing compared to the machines that play everything from Galaga to The Simpson’s arcade game. We won’t speculate on the reasons for that, but we do know how to make pinball emulation awesome – you need to emulate the buzzing and 60 Hz hum of solenoids found in the original machines.
This project comes from [Brendan Schrader] of the Hive76 hackerspace (http://www.hive76.org/) in Philly. It gives emulated pinball machines the tactile and haptic feedback required for a proper PinMAME setup. Inside [Brendan]‘s box are two monitors, one for the backglass and one for the playfield, and a small computer to run the PinMAME software.
Also in the box are a few transducers usually used to turn any flat solid surface into a speaker. [Brendan] sent the audio output from the pinball emulation to a set of speakers and the ‘mechanical sounds’ audio to the transducer mounted to the chassis. The difference between haptic feedback and no haptic feedback is amazing, and something every PinMAME setup desperately needs.
Unfortunately, [Brendan] says he lives a decade in the past and doesn’t do the whole interwebs and email thing. He tells us he’ll send in a build log in a week or so, and we’ll put that up when it comes in.
http://hackaday.com/2013/09/22/how-to-make-pinmame-awesome/