john999
October 21st, 2007, 00:44
Hello all,
I'm trying to make my Haicom 406BT gps receiver to work with mapthis.
I know it's possible because pc-mobile sells cable for it : http://www.pc-mobile.net/gcpsp.jpg
But I made my own cable (too long to buy it and can't buy it).
My psp is a 3.54 M33 firmware
I changed baud rate to 19200
I made a cable by cutting the earplug thingie and cutting the mini1394-to-usb cable of the 406BT and :
soldering blue wire with black one (of usb cable)
soldering gray wire with green one (of usb cable)
putting a 1K resistors between gray and green wires
The 406BT seems to 3d fix properly judging by the green led blinking.
It works properly on PC.
Did i do something wrong ?
Any help would be truly appreciated !
Thanks
I'm trying to make my Haicom 406BT gps receiver to work with mapthis.
I know it's possible because pc-mobile sells cable for it : http://www.pc-mobile.net/gcpsp.jpg
But I made my own cable (too long to buy it and can't buy it).
My psp is a 3.54 M33 firmware
I changed baud rate to 19200
I made a cable by cutting the earplug thingie and cutting the mini1394-to-usb cable of the 406BT and :
soldering blue wire with black one (of usb cable)
soldering gray wire with green one (of usb cable)
putting a 1K resistors between gray and green wires
The 406BT seems to 3d fix properly judging by the green led blinking.
It works properly on PC.
Did i do something wrong ?
Any help would be truly appreciated !
Thanks