PDA

View Full Version : i'm giving up..


kanefan
December 13th, 2007, 20:54
i can't get this piano homebrew to tun on my ds r4.. there are touch screen issues, i suppose:( anyway, i read somewhere on this site that you should recompile the app with the latest devkitpro. as i do not know how to do this or anything i would very much appreciate a bit of help:)
kanefan
December 13th, 2007, 20:55
i've looked everywhere btw..
Tikker
December 14th, 2007, 05:02
pretty hard to offer suggestions when we have absolutely no idea what you're actually talking about ;)
kanefan
December 14th, 2007, 06:27
ok.. i have r4 ds with m3 ver7. i have tried some homebrew stuff before, like ds sample player and some happy cat. now i've tried PianoVero, but ti didn't work. i couldn't touch any of the tangents. it seemed like the touch screen didn't work at all! so, i began searching the internet...

http://www.dcemu.co.uk/vbulletin/showthread.php?t=39000&highlight=piano

here it says something about recompiling the .ds file with the latest devkitpro software, and i have absolutely no idea how to do so! won't anybody please help me?
Tikker
December 14th, 2007, 23:43
where did you download it from?

there's the possibility that it's a really old slot2 homebrew and doesn't have a dldi section in it at all
kanefan
December 15th, 2007, 01:06
i dled it from

http://palib.info/forum/modules/newbb/viewtopic.php?topic_id=1624&forum=28&post_id=11499#forumpost11499

it seems it was made in 2006. i use slot-1 btw, if it wasn't obvious...
Tikker
December 15th, 2007, 06:13
it works just fine for me on my R4

which version are you sticking on your card?

you need the .nds, not .gba.nds or .sc.nds

ps, you have an R4
which firmware? get the latest
kanefan
December 15th, 2007, 10:51
well... i have m3dss v1.07... the r4 kernels for download at the official site doesn't quite work... whenever i try to use the english kernel on that site, there pops up a message on my ds with three exclamtion marks and something on chinese, that i don't understand...

i just tried dling the chinese version of r4, but it seems as if it's only 1.12. pianovero still not working..
kanefan
December 15th, 2007, 10:52
and that was the latest version i could find.
Tikker
December 16th, 2007, 08:56
you can't just alternate between m3 and r4 firmware......
kanefan
December 17th, 2007, 18:24
well, there was this guy on some forum site who put out a _menu.dat file and it seems that it was m3 v1.07. i don't know how, but obviously i CAN switch between m3 and r4 software... anyway, i have chinese r4 1.12 now, and it still doesn't work..