wraggster
February 27th, 2014, 00:37
http://hackadaycom.files.wordpress.com/2014/02/wireless.png?w=620&h=255
We’ve seen some of [Connor]‘s work before, and it looks like he’s now turning to product design. He’s come up with an adapter for the Raspberry Pi (http://cautious-design.com/product/wireless-ac-control/) to control a few wireless wall socket relays, allowing anyone with a Pi to control lights, coffee makers, TVs, and anything else that falls under the very broad home automation banner.
The system uses a 315MHz radio breakout board for a Raspberry Pi to control the relays in one of three wall socket adapters. There’s a script running on the Pi with a very nice GUI to turn the lights on and off.
[Connor]‘s product is extremely similar to a certain WiFi-enabled wall-plug relay system controlled by a smartphone, and to that end, he’s decided to call his device the Belchin’ Emo Switch. The name might need work, but he’s selling three Raspberry Pi-controlled wall plugs for the same price of one wall plug from Brand A.
Below you’ll find [Connor]‘s videos for his device. You can also check out this reddit thread (http://www.reddit.com/r/raspberry_pi/comments/1xh36g/not_only_will_we_have_opensource_software_and/) where he shows off just how open source he can be; there are part suppliers and even how he’s packaging this system for shipment.
http://hackaday.com/2014/02/26/wireless-ac-control-with-the-raspberry-pi/
We’ve seen some of [Connor]‘s work before, and it looks like he’s now turning to product design. He’s come up with an adapter for the Raspberry Pi (http://cautious-design.com/product/wireless-ac-control/) to control a few wireless wall socket relays, allowing anyone with a Pi to control lights, coffee makers, TVs, and anything else that falls under the very broad home automation banner.
The system uses a 315MHz radio breakout board for a Raspberry Pi to control the relays in one of three wall socket adapters. There’s a script running on the Pi with a very nice GUI to turn the lights on and off.
[Connor]‘s product is extremely similar to a certain WiFi-enabled wall-plug relay system controlled by a smartphone, and to that end, he’s decided to call his device the Belchin’ Emo Switch. The name might need work, but he’s selling three Raspberry Pi-controlled wall plugs for the same price of one wall plug from Brand A.
Below you’ll find [Connor]‘s videos for his device. You can also check out this reddit thread (http://www.reddit.com/r/raspberry_pi/comments/1xh36g/not_only_will_we_have_opensource_software_and/) where he shows off just how open source he can be; there are part suppliers and even how he’s packaging this system for shipment.
http://hackaday.com/2014/02/26/wireless-ac-control-with-the-raspberry-pi/