TUTORIAL: Remote joy on 3.90m33

[hodgy47]

This works on 3.90m33 with the 1.50 kernel add-on, 3.80m33 with 1.50 Kernel add-on, 3.71m33 with the 1.50 kernel add-on and 3.52m33

THIS ALSO WORKS FOR SLIMS AS THE 1.50 KERNEL IS NOT ESSENTIAL TO THE SETUP.
Attached Below is the reworked usbhostfs.prx remotejoy.prx which may cure the game load & save glitch.
NOTE TO ALL VISTA USERS IF YOU RUN THIS AND NOTHING SHOWS IN THE REMOTEJOY WINDOW PRESS F4 TO REFRESH, IF IT THEN SHOWS PRESS F4 AGAIN TO GET THE WINDOW BACK TO NORMAL SIZE. ALSO YOU CAN RIGHT CLICK ON ALL THE .BAT FILES GO TO PROPERTIES AND RUN IN COMPATABILTY MODE FOR XP WITH SP2.

The following will show you how to get remotejoy working on a 3.90m33 psp or one of the above firmwares and allow you to play your psp games on your pc screen.

Ok Firstly download these 2 files.

http://dl.qj.net/RemoteJoy-and-Screenshots-for-3.71-M33-PSP-Homebrew-Applications/pg/12/fid/14684/catid/151

http://dl.qj.net/RemoteJoy-SDL-2007-PSP-Homebrew-Applications/pg/12/fid/13707/catid/140

Ok now you have them lets go.

1. Open the file named remotejoy and screenshoot.

2. Copy the files usbhostfs.prx and remotejoy.prx to your seplugins folder if you dont have one then just create it at the root of your memstick if you have a GAME.TXT file in your seplugins folder open it and add the lines
ms0:/seplugins/usbhostfs.prx
ms0:/seplugins/remotejoy.prx
now save and close, if you dont have this create this also inside the seplugins folder.

3. Now open the file remotejoy sdl 2007 and copy the folder named remotejoy sdl to your desktop now open the folder you just placed on your desktop and then open the folder named psp fw 3.xxoe and copy the folder named psplink to your GAME380 folder (This stays as GAME380 for 3.90m33 firmware) or the one relevent to firmware being used e.g. GAME371, Game352 etc..

4. Ok at this point you do not enable the remotejoy.prx or the usbhostfs.prx in recovery we will do that later.

5. Now go to the game menu on your XMB and run PSPlink oe your screen should turn black with one line of text and pc should now say new device recognised PSP TYPE B in the install drivers window choose to install drivers maually then install from specific location and point your pc to RemoteJoySDL/libUSB and then either driver or driver x64(if you have a 64bit operating system) and click ok and it should now install the usb driver for the psp.

6.Now shut down psp completely and boot into recovery (Holding right shoulder button in while switching on psp), go to plugins and enable remotejoy.prx and usbhostfs.prx click back and then exit.

7. Once your psp has booted start a game either UMD or ISO and open the RemoteJoySDL folder you placed on your desktop and
Double click on Start-USBHostFS_PC.bat
Then Double click on one of the following.
Start-RemoteJoy.bat - for a window
Start-RemoteJoy-FPS.bat - for a window with FPS display
Start-RemoteJoy-FS.bat - for fullscreen
Start-RemoteJoy-FS-FPS.bat - for fullscreen with FPS display
Then insert your usb cable once inserted you dont need to keep taking it out to change games however when you exit a game your XMB will not show in the window but when you start another game that game will show automatically.

Your psp screen should now appear in the window opened when you clicked on one of the four commands above.

Now just enjoy your psp on the big screen.

2 glitches i have noticed.

1. If your game auto loads your save at the begining it may crash (to overcome this let the game load your save file before you connect to pc.

2. It can also hang when you try to save you can work around in the same way as above but it does'nt do it on all games.

Hope this helps a few of you out.:thumbup:

[ab_geee_eee]

Thank you! This really helped me :D

[No_one_in_particular]

That's propa class leek ;)

Cheers!

[hodgy47]

No problem, hope you enjoy it

[giggity giggity goo]

doesnt work... ive tried every F***ing version and way of getting this to work and none have ever given me anything except a blank screen...

[hodgy47]

It does work im using it myself on 3.80m33 you do have the 1.50kernel plugin installed.
and you must use the files linked to above they are the only versions that work.
Also disable all plugins except those listed above too and try again.

[xgamer91]

thanx dude

[calumrulez]

Any way of getting this to work on slim psp running 3.80 m33-5???

thx! :D

[hodgy47]

Any way of getting this to work on slim psp running 3.80 m33-5???

thx! :D

As of yet i dont think so i have a slim aswell and keep trying different ways but the problem is you need psp link which is homebrew and requires the 150 kernel but i will keep trying and will post if i solve it, or psp link may be updated to work with the slim.

[mike_jmg]

nice

[hodgy47]

The only way i can get this to work with slim is by using a fat psp to install the psp type b driver when you run psplink cos psp link wont work with slim cos it needs the 1.50 kernel but all the other plugins work fine once the drivers are installed.

[danyyyi]

i do all the steps but when i want to activate that things from plugins...i go to recovery ..plugins and nothing apare ...can you show me a video or something of step 1 ...i really dont get it :)

[hodgy47]

Ok step 1 Open the file named remotejoy and screenshoot. is opening one the files you just downloaded.

Step 2. connect psp via usb to pc and open your memstick in a window on your pc.
the first thing you see is the root of your memstick where all the files are.

If you dont have a folder called seplugins make one, to do this just right click in empty space in the area with all your psp files.
Goto New, folder and cick it then add the name seplugins.

copy the two files stated inside the folder seplugins that you just made.

To make the GAME.txt open notepad on pc and type these two lines,

ms0:/seplugins/usbhostfs.prx
ms0:/seplugins/remotejoy.prx

Goto save and save with the name GAME.txt and put this document you just made inside the seplugins folder also.

Now when you go to recovery/plugins they will be there and you can enable them.

[Puhspe]

Hay dude, i have remotejoy working in windowed mode only, i cant seem to get it in full screen. I have a 19" wideescreen running at 1440 x 900. dunno if this has anything to do qith it. But when i dbl click the Start-RemoteJoy-FS my screen says out of range :S. Im running 3.90 M33 with the 150 add and followed the tutorial to the letter. Oh and im on Vista.... ARHHHHHHHHHHHHHH how it pains me to mod PSP's with vista. lol

Any insight would be much appreciated


Puhspe

[hodgy47]

When it says fullscreen it only means the highest resolution it can handle for that screen size, i too use a 19" widescreen and i have 2, 1 inch black bars top and bottom of my screen, if yours is worse let me know and i will tell you what my desktop resolution is to see if works on yours.

-EDIT- Mine is also 1440x900 and only have the small black bars.

[acid_5nak3`]

I've done everything the guide said :)
And well, my PSP does get connected to my PC and I can control my PSP with my keyboard :)
But the problem is that my PSP screen does not show up on my PC !!! :confused:

When I open the "Start-USBHostFS_PC.bat" file then it shows this image - http://i182.photobucket.com/albums/x291/acid_5nak3/Desky3.jpg [Which I think is normal :)]
And then when I start "Start-RemoteJoy.bat" file, then it shows this image - http://i182.photobucket.com/albums/x291/acid_5nak3/Desky4.jpg [Well, it juz shows a Black screen] :confused:

So, what did I do wrong ??? o_O

[Chrikke]

Seeing as this needs 1.50 kernel, I suppose I can't use this on my PSP Slim & Lite?

EDIT: NVM, you might want to fix that tutorial. There's no need for 1.50 kernel :)

[hodgy47]

@Acid, Disable all plugins apart from the two listed in this tutorial and try again, Controling the psp from keyboard isnt part of this setup so you must have something else running which is conflicting.

[kingsven]

Remote joy does work on psp slim light. i have a psp slim light and i am using remote joy since a few monts ago so i dont know what problem you guys are having but it works on mine :)

[kingsven]

And i also forgot to mention that you dont need psp link atleast i dont need it

[RDemusX]

Well, I am having the same problem as Acid. I am running 3.90 M33, and I get the same thing as him. It says its connected, yet it will not show up on the screen. I have only the two plugins that are needed disabled. I am on a phatty ... and any help would be GREATLY APPRECIATED :D

Thanx
RDX

[Darklotuslay]

3. Now open the file remotejoy sdl 2007 and copy the folder named remotejoy sdl to your desktop now open the folder you just placed on your desktop and then open the folder named psp fw 3.xxoe and copy the folder named psplink to your GAME380 folder (This stays as GAME380 for 3.90m33 firmware) or the one relevent to firmware being used e.g. GAME371, Game352 etc..

where is the game380 folder? can i create my own 380 folder and use it?

[hodgy47]

Well, I am having the same problem as Acid. I am running 3.90 M33, and I get the same thing as him. It says its connected, yet it will not show up on the screen. I have only the two plugins that are needed disabled. I am on a phatty ... and any help would be GREATLY APPRECIATED :D

Thanx
RDX

You need those 2 plugins enabled not disabled.


3. Now open the file remotejoy sdl 2007 and copy the folder named remotejoy sdl to your desktop now open the folder you just placed on your desktop and then open the folder named psp fw 3.xxoe and copy the folder named psplink to your GAME380 folder (This stays as GAME380 for 3.90m33 firmware) or the one relevent to firmware being used e.g. GAME371, Game352 etc..

where is the game380 folder? can i create my own 380 folder and use it?

GAME380 Folder should be inside the folder named PSP if its not there yes you can create it.

[Darklotuslay]

ok thanks for the help but i have another. i have the Game380 folder under PSP with the PSPlink in it. do i need custom firmware before i look at the XMB's game area? if so, how do i get the custom firmware?

[hodgy47]

This will only work with custom firmware as you need the recovery menu and homebrew support.
To get custom firmware you need despertar cementario v3 or v4 and a pandora battery.

What firmware are you on now.

[Darklotuslay]

This will only work with custom firmware as you need the recovery menu and homebrew support.
To get custom firmware you need despertar cementario v3 or v4 and a pandora battery.

What firmware are you on now.

the official 3.90. where can i get the despeatar cementario V3/V4?

[hodgy47]

You can get both here www.dark-alex.org but you will need a psp running custom fw to make the memstick and battery which you must have to install the custom firmware

[Darklotuslay]

You can get both here www.dark-alex.org but you will need a psp running custom fw to make the memstick and battery which you must have to install the custom firmware

and once i have dowloaded the firmware, which folder from the PSP do i put the D.C ( v4 )?
i will also download the Addon Kernel. which folder do i put the K.A. in?

[Darklotuslay]

some other questions. what does the Casino Cash do? is there a walkthrough for the D.C.V4 and the K.A V2?

[Darklotuslay]

and thanks for ALL the help so far:D

[AdamRav]

Darklotuslay, i dont know if you realise, if you dont know someone running custom firmware then your not going to get anywhere

There are alternatives though

you could either take the battery apart and make a "pandoras battery", personally thats kinda hard if you dont know what your doing

or you could buy a battery tool

http://www.divineo.com/cgi-bin/div-us/zz-psp-btool2.html

and all you need to do then is make the magic memory stick

and your good to go

[kornman00]

Umm guys when i ran remote joy it ran perfectly fine except that the when I see it on the screen it looks laggy and jitters.Help would be appreciated.

[hodgy47]

Increase the processor speed on psp to 333 and try that if not stop anything thats running in the background on your pc as they could be using system resources.

[PSPman607]

hey,the guide is awesome but when i run PSPlink nothing shows up on my computer just 3 low sounding beeps sound and thats it......how do i get it to show up?

[hodgy47]

So does it not ask for drivers for psp type b, the beeps could mean it needs drivers, the only thing that will show is the drivers needed screen nothing else, and are you running vista or xp cos xp is best for this, post back and we can get it sorted

[PSPman607]

im running vista and i tried it before but i didnt know what to do and it kept saying "failed" after i chose the wrong drivers sorted and now when i try it nothing at all pops up and all it does is those really low beeps which I have no idea mean. It doesnt ask for anything at all not even a screen comes up...maybe vista is the problem but it showed the screen before...

[hodgy47]

You could try going into device manager on pc and deleting the psp type b drivers from there ad then re-try again from the begining

[PSPman607]

Ok, i didnt find anything that said "PSP type B" but i did find something that i dont remember installing or anything on my computer and it was in the section the PSP type B probably would have been and it said that it couldn't work so i got rid of it and now the computer does absoutley nothing when i run PSPlink

edit: oh wait! I enabled the pulgins and now it works!!! yes!

[hodgy47]

Glad your sorted.

[omg209]

ok everything works but when i start remotejoy i get a black screen, so i press f5 to refresh, but when i do that the game and screen always freezes im using the updated version of the remojotejoy.prx because i want savegames to work. when i use the older versions of remotejoy.prx they work fine except the save and load game. anyonebody kno the problem?

running on 3.90m33-2 with 1.50v2 addon

[ameic]

mine dosnt come up with psp type b, it just says, Unknown device, im running 3.90m33-2 and ive run KeyCleaner and it hasnt fixed it.. any ideas?

[hodgy47]

You could go to control panel on pc then add new hardware and search for new hardware then choose the unknown device choose install drivers and point it to the drivers in the stuff you downloaded.

[omg209]

ok everything works but when i start remotejoy i get a black screen, so i press f5 to refresh, but when i do that the game and screen always freezes im using the updated version of the remojotejoy.prx because i want savegames to work. when i use the older versions of remotejoy.prx they work fine except the save and load game. anyonebody kno the problem?

running on 3.90m33-2 with 1.50v2 addon

[hodgy47]

Try using the updated usbhost and the old remotejoy.prx

[Sepharite]

Hey, great tutorial.. too bad it doesn't work for me =(

I'm using Vista, if that has anything to do with anything. I get get USB to work, it's connected. But when I load Remotejoy, I only get a blank screen. I'm trying to use it with IRSHELL but that doesn't work either.

[hodgy47]

Vista may be a problem but here may be a way round i will check for you as i am using xp.

[Sepharite]

I got it to work with IRSHELL, just by enabling USBHOST. But that's it =/

[hodgy47]

Just been on msn with a vista user needing some help run it the normal way and start the psp game first and let it get past loading then run the usbhost and remotejoy and if nothing shows in window press F4 to refresh if it shows press it again to get to the right screen size.

-EDIT- You can also right click on all the .bat files go to properties and run them in compability mode for xp with sp2

[omg209]

Try using the updated usbhost and the old remotejoy.prx
i said it works if i use old remotejoy.prx but i want to save my games while with remotejoy and the new one doesnt work

[hodgy47]

are you running xp or vista, if vista this is a problem you could try running all the.bat files inside the remotejoySDL in compatability mode for xp and refresh using F4

[omg209]

are you running xp or vista, if vista this is a problem you could try running all the.bat files inside the remotejoySDL in compatability mode for xp and refresh using F4
nope it is windows xp sp2

[kisu]

Does it word in my slim psp? Could you tell me how to work? Thank you.

[hodgy47]

Try the same way as the tutorial, if it doesnt ask for drivers from psplink or psplink wont work enable plugins in recovery restart psp and start a game and it should ask for the type b drivers.

[hodgy47]

nope it is windows xp sp2

I will check the plugins it should work, it works on mine and others.

[joseph10444]

ok it works
but whenever i start full screen or normal window, its just black..

i booted gta lcs umd

[FaIIen]

apart from watching videos and playing games on a bigger screen (which probably should suck cause the resolution gets streched) why else would you want to do that ? (this is not a flame btw)

[hodgy47]

ok it works
but whenever i start full screen or normal window, its just black..

Try pressing f4 and f4 again also experiment with mixing the new and old prx's
i booted gta lcs umd


apart from watching videos and playing games on a bigger screen (which probably should suck cause the resolution gets streched) why else would you want to do that ? (this is not a flame btw)

Why do people use skype when you can buy skype handsets or why do people do aything with the psp its just a mess around.

[joseph10444]

thanks F4 worked but whenever i try full screen or full screen w/FPS there are 2 small screens showing the gameplay..

[kisu]

This tutorial works on my slim psp. My program is 3.90 m33-2. But when I want to quit a game. My psp will turn to black screen and then shut down, even I take off the USB cable line from my psp. Can you help me solve this problem? Thank you.

[hodgy47]

This tutorial works on my slim psp. My program is 3.90 m33-2. But when I want to quit a game. My psp will turn to black screen and then shut down, even I take off the USB cable line from my psp. Can you help me solve this problem? Thank you.

I had the same problem with mine, It was an alternative type of vsh menu when i removed the plugin it all worked fine again. (BTW This is not a problem caused by remotejoy).

[joseph10444]

help!!

i enabled usbhostsfs.prx and remotejoy.prx in my plugins and added the line to GAME.txt

AND

all my other plugins are disabled

but somehow, when i press START USBHOSTFS_PC.bat thingy it wont say the usual, "connected"

the usb cable is fully in..
and it worked before...

and i tried it AFTER the gamesave loaded..

[hodgy47]

Try a different usb cable if you can just to be sure.

[pet1]

I can get remotejoy to work. The game loads for only a few seconds. Then it just freezes. I have to reboot. I'm using a phat with 3.90 m33-2 with the new plugins in the first post. Thanks again.

[evilguy12]

I can't get Remote joy working any faster than 4FPS. I'm using 3.90m33 with 1.50 kernal.

[hodgy47]

I can't get Remote joy working any faster than 4FPS. I'm using 3.90m33 with 1.50 kernal.

does your pc have usb 2.0, check your lead, it should run faster than that, Sounds like a resource issue on pc, check whats running in the background.

[evilguy12]

does your pc have usb 2.0, check your lead, it should run faster than that, Sounds like a resource issue on pc, check whats running in the background.

How would I do that? I've already quit all programs that are open. BTW, I am connecting my PSP to a USB 2.0 hub.

[SSJSephiroth]

Man, I am going nuts... I have done everything seen here to try and get this to work. I am running m33-2 and have replaced the cable i was using just to be sure
I am using vista and have tried both the f4 trick and running in compatibility mode and still just get the black screen. the only two plugins enabled are the two asked for here. I'm really not sure what other info you need, but just please ask as I really want to get this working. Thanks!!!

[hodgy47]

Man, I am going nuts... I have done everything seen here to try and get this to work. I am running m33-2 and have replaced the cable i was using just to be sure
I am using vista and have tried both the f4 trick and running in compatibility mode and still just get the black screen. the only two plugins enabled are the two asked for here. I'm really not sure what other info you need, but just please ask as I really want to get this working. Thanks!!!

Try using the old plugins and mix of old and new, Vista does and is having poblems with this due to compatability with xp apps so my only advice is to keep trying different ways.

[Equal1zer]

this is works on 3.90m33-2,too.. thanks man!!

[extremeblizz]

I managed to get remotejoy working and all and even got past the whole save thing you just disable remotejoy then save but the game itself (god of war) still gets stuck ingame which as of now I can't find any way to get through...

[eric_heat]

when i do this i do everything on ur instructions, but when i click on the fullscreen one my monitor goes blank, then i press esc then it goes back to normal, i dont get it

[bacalacadaca]

doesnt work for me i tried it on both vista and XP but nothing

[kalafka]

I cant get this to work with gow

Hey, i recently started using remote joy, and it works for most games, but when i try it with god ofwar my psp just freezes, and i know its not a game thing, I know its possible for it to work because Ive seen hundreds of video son youtube of god of war being recorded through remote joy..

Has anyone here got it worknig? Maybe know of a similar game that froze with remote joy but found a solution? Please post !

can anyone tell me what to do so this game doesnt freeze? Or post a version of a remote joy that works with god of war? I can play burnout with remote joy without problems, same with patapon, no problems, just with my favourite game, GOD OF WAR.

thanks

[hodgy47]

when i do this i do everything on ur instructions, but when i click on the fullscreen one my monitor goes blank, then i press esc then it goes back to normal, i dont get it

Try using F4 to refresh the screen.


I cant get this to work with gow

Hey, i recently started using remote joy, and it works for most games, but when i try it with god ofwar my psp just freezes, and i know its not a game thing, I know its possible for it to work because Ive seen hundreds of video son youtube of god of war being recorded through remote joy..

Has anyone here got it worknig? Maybe know of a similar game that froze with remote joy but found a solution? Please post !

can anyone tell me what to do so this game doesnt freeze? Or post a version of a remote joy that works with god of war? I can play burnout with remote joy without problems, same with patapon, no problems, just with my favourite game, GOD OF WAR.

thanks

Is this the latest god of war game, try using a mix of old and new prx's even ones from previous versions of remote joy.

[goeetrice]

hey, i did everything you said, but the plugins wont show up when i enter recovery mode. i opened my folder, and added everthing, but still wont show the plugins. :/

edit: nevermind, i got it now thanks, great totu :p but its still a little bit laggy :/

[sk8lpsp]

hey ive tried evrerythig and i get this error: error in socket maggic 00000001 im runnig a 3.90 m33 with 150 kernel plugin can ui help me o and yah its a fatty:mad::mad::mad::mad:

[bacalacadaca]

I got it to work now but its still slow and freezes before a real iso game starts the old plugins worked better for me

but does anyone know how to get it to stop freezing while its loading a save game

[hodgy47]

I got it to work now but its still slow and freezes before a real iso game starts the old plugins worked better for me

but does anyone know how to get it to stop freezing while its loading a save game

Allow the game to load first and then click remotejoy.bat

[hodgy47]

hey ive tried evrerythig and i get this error: error in socket maggic 00000001 im runnig a 3.90 m33 with 150 kernel plugin can ui help me o and yah its a fatty:mad::mad::mad::mad:

I will look into this as i have never heard of this error before.

[Corfal]

how do you remove the FPS for a normal sized screen? For the Full Screen it isn't there, but when I select Start-RemoteJoy. It displays the FPS on the top left exactly as the Start-RemoteJoy-FPS.bat

Ugh, I too now am Receiving the magic socket error. I might have closed the RemoteJoy/disconnected in the wrong way? I had this problem before in fact, when the program would connect to the device but only display a black screen. Thats when I had 3.7 m33, then I installed 3.9 m33 and the RemoteJoy for that and it was good again. So perhaps I should reinstall everything again?

[Vampirex]

I'm having problems with remote joy. When i used 3.52 M33-4 firmware, everything works fine. But since i updated to 3.71, the new remote joy had problems loading save files. I thought maybe if i upgraded to 3.90, it would be better. Its a little better, but i can't seem to get the save file to load. Trying to play Crisis Core JPN if that helps.

[yohannus]

hey, i did everything you said, but the plugins wont show up when i enter recovery mode. i opened my folder, and added everthing, but still wont show the plugins. :/

edit: nevermind, i got it now thanks, great totu :p but its still a little bit laggy :/

how did you get it to work? plugins don't don't show up in my recovery mode... i added the files and made the game.txt correctly... i'm running 3.90 m33-2... can anyone else help me?

[Corfal]

If you follow the steps exactly, it should work. You are putting it into the SEPlugins folder on the Root directory, right?

On the magic socket problem. I added the screenshotbmp.prx into the plugins folder and ran PSPlink again. It works now. I'm not sure how many unnecessary steps i might of made but i took everything off from my PSP and computer and put them back on, it still didn't work. Until what I did mentioned above.

Edit:Still wondering about the FPS display on the regular screen. Doesn't go away when selecting the regular RemoteJoy.bat


I'm having problems with remote joy. When i used 3.52 M33-4 firmware, everything works fine. But since i updated to 3.71, the new remote joy had problems loading save files. I thought maybe if i upgraded to 3.90, it would be better. Its a little better, but i can't seem to get the save file to load. Trying to play Crisis Core JPN if that helps.

Start RemoteJoy after loading the saved files

[yohannus]

so strange... i did do it EXACTLY how it was written.. and the plugins still dont show up... i dont have any other plugins either...

SEplugins in the root directory... remotejoy.prx and usbhostfs.prx in SEplugins...
game.txt file with
ms0:/SEplugins/usbhostfs.prx
ms0:/SEplugins/remotejoy.prx
.... and still no plugins

[perganon]

can't load games :(
i try %loadvsh
reboot psp and same screen
PSPLink bootstrap vs..

:( how to load games ?

[ryda713]

is there anyway to get the sound to be on ya pc. coz i would like to use fraps to record my psp, show off my intros themes gameboots etc... on the xmb, also needed the sound would be great coz of click sounds, bootsounds etc.. or am i better off using a cam?

[TheFoil]

is there anyway to get the sound to be on ya pc. coz i would like to use fraps to record my psp, show off my intros themes gameboots etc... on the xmb, also needed the sound would be great coz of click sounds, bootsounds etc.. or am i better off using a cam?

I guess you could connect an audio cable from your psp's headphone out into your Line-in slot in your soundcard, that worked for me.

[san13]

I dont wanna be mean BUT i must say this,
This is an impossible homebrew(reading the directions carefully doesnt seem to help some apparently) so im just saying maybe some of you should just give up on this,(if you don't have a lot of spare time) or if you do have too much time then keep trying, it might work someday but that day wont be this day or any of the next:( SIGH

[sconethief]

I have a problem that when I load USBhost or PSPSH It shows this
http://img74.imageshack.us/img74/5374/helpwf8.jpg

[yeshuachrist]

i had a laggy issue which i fixed by reformating flash banks 0-3, just google and grab that .prx file. anyway i used to run a lot of different apps including irshell, somewhere along the line it must of corrupted itself.

anyway, thanks the setup works, 3.90 m33, some other remote joy setups also work with the psp setup you made great work. (to the dude who posted above me, sounds like you have a computer virus lol, had that one before it attacks 16bit apps or unregisters them)

[BlazeSky]

Hey
Thanks for the tutorials. it works fine to me.
Every thing is okay but when it comes to save a data, the screen freeze and I have to restart my game. Is it normal?

[Rimark]

Hey,I have a problem with remotejoy.Whenever I try to install the driver,It says its connected as a usb instead of psp type-b,also,when I try to install it from libUSB/driver,it says cannot install this hardware and the wizard cannot find the necessary software.can anybody help me out?

Edit:I have 3.71 m33 btw.

[exeros]

has anyone gotten this to work on a slim 3.90m33 psp.
All I get is a black screen. I've tried various usb and remotejoy plugin files with no luck.
I was going to try to reinstall the type B drivers so I uninstalled the drivers first but now when I plug in the psp and run psplink it see's it as "PSP" and not "PSP type B"
any suggestions?

[Drake erif]

hey nice guide, unfortunately I can't get it to run properly ... I say it's a nice guide because I see that it has helped a lot of people and I must have something wrong not you.

I did EXACTLY what it says however when I try to run remote joy it says connected but nothing shows up on the screen AND I can't press ANY buttons on my psp they stop working except for the home button, I am running 3.52 M33-4 has anyone else had this problem? I know it can work on this firmware I just want to know why it's doing this and how I can fix it

EDIT: OK so I did some searching around and download and mixing files and finally got a combo to work, however I have the same problem as a few people on here it freezes whenever it loads/saves what can I do?

[kodard69]

ok well this is the problem i have all programs installed correctly,both plugins running.and i have usb host also running on my computer after i start a game though it stays at a black loading screen...? i have cfw 3.90m33-2 im not shurr why this is happining but can u please explain my Msn is [email protected] thanks:thumbup:

[dannathomas]

okie aparently ppl are having problems with 3.90 m33-3

i personally have 3.90 m33-3 on a phat with the 1.50 addon i followed this tutorial and did some reading in the read me's using the three programs
(usbhost),(pspsh), and the joy (not full screen mind you i tried that to)

for some reason when i finish everything all i see is a black screen and i see the line of text on the psps
but when i type in %loadvsh on the PSPSH my screen on the psp goes away for about 5 seconds and comes back.

i do have everything installed down to a t.. but no aval any help with this would be perfect ..
oh and im trying to run US monster huner freedom 2.

[persian_mario]

hey im having trouble psp type b on a deiver...each driver i attempt to use either has no dirver or is signed and is important to the functionallity of the PC...how do i fix this problem..

[xXxlovestospoogexXx]

i got a slim and really want to know how to get remotejoy....to let u know i dont really know wat firmware is suitable so could u pleeeease help me

[Razzelmire]

Can someone tell me specific instructions on how to get your PSP slim to change over to 3.90 m33? Thanks.

[leman]

I have a Phat PSP running CFW 3.90 M33-3 with the 1.50 kernel v2 addon. I also have POPSloader plugin installed which was disabled while I followed this guide. I followed the guide to the letter, read every post in this thread, and tried every relevant suggestion I could find.

The closest I've been able to get with this is having a small black window and the ability to control the PSP using my PC's gamepad - though the button & axis assignments were completely wrong.

Does anyone have any suggestions as to what I can do to get this working?

[Ruuki]

Thanks for the tutorial. I've been trying for the longest to get remote joy working on my PSP. I have one question though...
A friend of mine also has remote joy but his has a capture folder so he can create AVI files. I was wondering how I can get that file to create vids. Help would be much appreciated.

[wwboy]

psplink is damaged

[shivy1991]

Hi, my favourite game is sfdm and i only play it for the online multiplayer, but it has to load my savegame before every deathmatch.
Is there any way of getting working updated prx's cos the old ones freeze when it loads and the new ones freeze when it refreshes the screen! I have tried every combination between new and old prxs.
Thanks Shiv

[hiloster12]

its not finding the driver for PSP Type B, im on Vista SP1

[Grover212]

I got this sort of working on my XP using a PSP 3.90m33.
In NHL 07, I can get it to work only until I start a game...I'm able change settings and all that stuff but the screen turns black and shuts down when i want to start a game.
I Dunno
Any suggestions

[haneef]

i have 3.90m33-3 and it doesnt work

[WhenTheyCry]

what should be the active Kernel in order for this to work ? 1.50 or 3.90 ?
I am using a FAT PSP with 3.90 M33-3 CFW ..
Furthermore, what do I do it the PC does not recognize PSP TYPE B ;( I am using XP SP2 ... Idk what is wrong, but it won't find it ... I do everything as said (I have configured the Kernel forhomebrew folder to be 1.50 inmstead of 3.90 ) ..
I am using 3.90M33-3 but my folder's name is GAME 351 WHAT THE FX ?! ... Is this the problem ?

[Dankobg]

is there any news for psp slim versions ???? can it work on psp slim 4.01 m33-2

[scorpion4504]

is it working on 3.90m33-3 slim psp? because many times i tried nothing is happen

[onime-no-enishi]

hmm i got remote joy working but i have 2 issues at the moment:

i dont know how to use screenshootbmp.prx to record

and also, in full screen mode, the view is stretched, is there anyway to make it normal looking? (i dont have a wide screen monitor, but i dont mind having black parts on the top and bottom of my screen)

[lyft]

I have only those 2 needed plugins enabled... All what i ve got is black screen on my PC ... What to do ?
P.S. I use 4.01 M33 on PSP fat, windows SP2, pressing F4 does not give anything

EDIT: nvmd, it started to work :p
EDIT2: Thank you very much for such nice tutorial :)

[thairacer]

personnaly i have tried every way and i have only a black screen ! i think that problem come from "usbhostfs.prx" cause i didn't hear the usb sound when i used this plugin (or when i connect usb cable to psp when game is lauched), so i tried with "psplink.prx" and it works great ^^ on 3.90m33

[Dom83]

Hi. I have a PSP Slim & Light with 3.71 M33 custom firmware. I tried this tutorial, as well as many other ones and many other versions of Remote Joy, and the only thing I get is a black window or a black screen... :mad:

I tried on my two computers, one with XP and one with Win2000 SP4. They both have USB2. I can enabled the plugins in the recovery mode, my computer finds the psp and install it as "PSP Type B", "connected" is written, but the windows stay all black...

Can the problem come from my graphic cards ? One has an old GF440MX and the other has an intel chipset.

Besides, all my games can't exit anymore, each time the psp freezes on "please wait".

Please help. I did read this full topic but I did not find any solution.

[watson540]

Hi. I have a PSP Slim & Light with 3.71 M33 custom firmware. I tried this tutorial, as well as many other ones and many other versions of Remote Joy, and the only thing I get is a black window or a black screen... :mad:

I tried on my two computers, one with XP and one with Win2000 SP4. They both have USB2. I can enabled the plugins in the recovery mode, my computer finds the psp and install it as "PSP Type B", "connected" is written, but the windows stay all black...

Can the problem come from my graphic cards ? One has an old GF440MX and the other has an intel chipset.

Besides, all my games can't exit anymore, each time the psp freezes on "please wait".

Please help. I did read this full topic but I did not find any solution.


you're a liar too. 1 post wonder..hah..if you read even HALFWAY down on the first page you would have seen it only works on fat psps. damn kids need to learn to read.

This is the problem with having a psp and enjoying it, you have to wade through the billions of lying little kid posts everywhere to find decent info. I wish i could find a psp forum with an enforced age limit

[Dom83]

First, I did read many times that it does work with slim psps by several different people on several different forums, with this version and older versions of Remote Joy. (nearly sure I read it here as well) The problem was just in the past we were not able to install custom firmware on slim psps but now we can.

Second, I am 25, maybe I speak english like a kid because I am french. But can you speak french as well as I speak english ? I am a game developer, tons of people love my job, my games work on every computers and have no bug. I can't say that about Remote Joy... By the way I gave up trying after I read too many people saying they just can't get it working on their computers. It will simply never work on my computers because of incompatibility or such.

You look angry, though I won't mess with you anymore and spoil this topic, you're just a line on my screen and I prefer ignore you. No need to answer this, I won't read and I won't answer anyway.

[ghost cl0ne]

Nice

[Vorch]

hope someone will still help me..

So, I'm running 3.71 m33-2 (slim)

I enabled those 2 plugins and disabled those unnecessary plugins..

I'm sure I followed the guide and have read the thread.. I also tried pressing F4 and compabilty on XP sp2 .. coz I'm using Vista..

nothing but a black screen..

also, when I start it, it doesn't state that it's connected..

what could be a remedy for this?

Help would be deeply appreciated,expected and anticipated..

[sora128]

thanks a lot dude!!!:thumbup:

[jam_47]

plz remotejoy 4.01 m33-2

[traek]

hy,
fgot a prob whit tis stuff
like, if i start a game then open "start-usbhostsf_pc" and either one of the remotejoy.bat applcations
i just c a blk screen
i use vista but my compatibility settings r all set to windows xp sp 2
my firmware is 3.90 m33-2 and my kernel 1.5
i have no other plugins enabled only those two things u say

also if i started a game whit my psp on usb cable and those usbhost and remotejoy things running and press teh home buttn to insert nother game, i still hear the game musik and my psp stucks at the "please wait... point
but now it even happens if not on usb...

what do i have to do to fix this all
plz help me

mail me @ [email protected]

pz

[alpha136000]

will this work with 5.00 m33?

[Zic3]

Hey i had a question, i am currently running 3.71 M-33 cfw with the 1.50 add on, and i followed eveerything and i still cant get this thing to run, i cannot get the plugins to show up, would you know why? And i have done the steps of the GAME.txt file and stuff, but i am lost on getting it to connect in the usbhost.

[hullmatu]

i have an 5.00 m33-3 softwere . and i cant get the program to work! can you help me? maybe post a link for a newer program made for 5.00 softwere if you know one.

[NeoTechni]

How can I get RemoteJoy working on an original (not phat, we're not retards) PSP?

[Bojack]

I am running 3.71m33 with 1.5 add-on. I got the remotejoy running fine, but when I go to save my progress in Monster Hunter 2nd G, it freezes my game and turns off my psp. I load the game again and it didn't save. Any Ideas why it freezes? I saw those updated files on the bottom of the post, but I didn't use them to replace the old ones yet. Will this fix the freezing? Any help will be appreciated. Thanks

[melmelgx2]

I did all the steps like 5 times its not working all i get is a Black screen my frimware is 3.80 M33-5 do i need anything special ive tried alot and really want it to work i even made an accont just to post this

[MartY3]

this doesnt work with latest v5 cfw's :( just a black screen on the window on pc

[Nunop]

6.Now shut down psp completely and boot into recovery (Holding right shoulder button in while switching on psp), go to plugins and enable remotejoy.prx and usbhostfs.prx click back and then exit.

i dont know how i make that, can u explain me that better? :)

i mean how i can boot into recovery?

[ppeterr]

where can I get the 1.50 kernel addon?
I am using a psp slim 3.71 M33-3,can this be really done?
I am confused

[ppeterr]

you can boot into recovery by following these simple steps:
1.Hold the psp switch(for 5 seconds) and it should shut down.If you hold it for less it will stand by(thats not what we want)
2.With your right hand hold the R button and then switch the psp on(you must hold the button during the start up)
Then you got to the recovery screen,a black screen with red buttons

[azmi96]

Im having prob wif number 6~7 . i am on recovery move , when i go plugins . it didnt show remote joy n usehost . Reply ASAP Pls .