iRShell Enabled on 3.90 M33 Patch

[CaptainMorgan4]

edit

[DarthPaul]

Thanks Morgan. :)

I kinda knew this was possible but I'm too lazy to do it manually. So this is great for me.

[borgqueenx]

can someone please pm me the files to copy to the flash0 so i can launch cso's in irshell?

[limmk]

wowwwee… certainly make my day!

thanks to ahman

[CaptainMorgan4]

Yeah thanks Ahman---->http://i25.tinypic.com/1z23aeg.jpg

--edit: that's Ahman Green if you didn't know

[Shrygue]

Great news to hear, now my favourite homebrew application IrShell can run once again on my PSP under cfw 3.90 M33.

[djbrotherson]

GUYS it runs but did anybody get iso's working

check these videos

they really piss me off cuz i cant find a damn answer

http://ca.youtube.com/watch?v=3Rxhy2h3sy8
http://ca.youtube.com/watch?v=f6tZo0d4vKw

[CaptainMorgan4]

I'll try my Madden 08 in a while and tell you what I get, when I first tried it I just made sure it booted and then turned it off.

[limmk]

GUYS it runs but did anybody get iso's working

check these videos

they really piss me off cuz i cant find a damn answer

http://ca.youtube.com/watch?v=3Rxhy2h3sy8
http://ca.youtube.com/watch?v=f6tZo0d4vKw

irshell 3.91 se??!

[diskullone]

ir shell 3.91 SE was released before 3.90! it's the same buld of ir shell: one for public, one for beta tester!

so, for public : use frosty's trick to enable no umd with the firmware check patch!


PS: CaptainMorgan4: You don't say anything about the source, Hatter a beta tester from www.irshell.org's forum! is it you?

[djbrotherson]

I got it working

Had to do more than just putting the file(s) in my irshell/bin folder

I took the pspbjtn_02(or something).bin and irspatch.prx files from my 3.80 m33-5 flash0 /kd folder (after i patched them from irshell) and put them in my 3.90 m33 flash0 /kd folder

I got iso's working IN irshell however Skype doesn't (via xmb) so im trying to find out if there's a way around it

UO gpsp kai 3.2 test 8.7 doesnt work when loaded IN irshell (freezes when you load a rom) however it does work when you launch XMB and goto the game menu it works but you won't be able to get back to irshell using L + SELECT (goes for most other homebrew/games i believe, not sure)

CPS2PSP and MVSPSP 2.3.1 doesnt work IN irshell either when you load a rom, it may freeze

Everything else seems to work... i don't use eLoader, don't care for N64 as the emulation is pretty primitive

Anybody else have similar finds?

the video

http://ca.youtube.com/watch?v=ot7yFZPDAl4



anybody get any PSX games working?? (at all)

[Fr0sTy]

wow.... i never thought i'd make news like that lol. i made front page. :)

[diskullone]

it's not only you, but you are really like a star with this 'trick'!

AV Frosty!

[djbrotherson]

Yea man straight up, i'm glad he found out how to pull this off

[tomuchpercussion]

Are NEThost and USBhost, still functional using these patches ( Fr0sTy's and CaptainMorgan4's)

[Dragons!!?!?]

HI i want to download irshell but im having probs with downloading darkalex i dont KNOW WHAT IM DOING Plz i need help.
I have a PFat psp with 3.90 firmware plz help

[diskullone]

Are NEThost and USBhost, still functional using these patches ( Fr0sTy's and CaptainMorgan4's)

frosty's patch enable no umd mode and also net/usbhost! captainmorgan's patch enable Cfw 3.90M33 on ir shell!

[Gplskuall]

You Rock!, I was affraid of getting the 3.90M33 due to the lack of IR shell, but with this patch, it seems to be allright, I've just updated it, and added kernel addon 1.50, so its perfectly "sharp".

Thanks!

[Dragons!!?!?]

So if i use captainmorgan's patch i can then download irshell or what??

[Dragons!!?!?]

So if i use captainmorgan's patch i can then download irshell ?? i need help

[limmk]

So if i use captainmorgan's patch i can then download irshell ?? i need help

exactly. the patch will let you run irshell on cfw 3.90m33 but to run no umd mode, you have to follow frosty's instruction

[Dragons!!?!?]

exactly. the patch will let you run irshell on cfw 3.90m33 but to run no umd mode, you have to follow frosty's instruction
Ok whats a flash0? what bin , what does cfw mean? Im trying to follow frosty's instructions. im on this web site http://forums.**********.net/showthread.php?t=99394 can someone start me off from the start all the way to the end step by step , I have a 3.90 firmware and its a phat psp. put maxc0ns0le where the *is

[diskullone]

your psp have an original sony's firmware 3.90! but this post is for custom firmware made by dark alex, 3.90 M33!!!

to use ir shell, you got to install a custom firmware on your psp: make a despertar del cementerio kit V4 with an other psp who have a custom firmware! this kit can install 3.80M33 on all psp, phat or slim!

[lion09503]

can anyone post a tutorial cuz i can't access irshell.org
thanks and pls. pm me the files from the kd folder

[diskullone]

files from kd folder are sony copyrighted! send it by pm is not legal!
follow this step by step instructions:


first install 3.80M33 5, then install irshell 3.90 and also the btncf patch for 3.80.

go to recovery mode, and take the 2 PRX from kd folder in flash0.

now you can install 3.90M33 with ir shell 3.90!

put prx from 3.80's flash0 in the 3.90's flash0! replace the files in IRSHELL/BIN with the files you download in this thread!

enjoy!

[Dragons!!?!?]

Ok is pandoras battery needed or can i just find a downgrader and download? to 1.50 then instal the custom firmware ...THEN install IRshell?

[diskullone]

with Cfw 3.71M33, you can downgrade directly to 1.5!
but i don't really now for 3.90 M33!

fastest way for me is despertar del cementerio V4: this kit install 3.80M33-5, just what you need!

[swisstekk]

Hi guys,

I have a big problem. I have a PSP Slim with firmware 3.90M33. Now I want tu use IRShell 3.90. I have read the FAQ and I know that I have to patch the Firmware Kernel. But it has no btncf patch for 3.90M33 only for 3.80M33. What should I do now? Can I use the patch for 3.80 or do I have to downgrade my cfw first to 3.80 then patch, install irshell and then upgrade again to 3.90m33?
*confused*

Greez
Swisstekk

[diskullone]

swisstekk: you have to downgrade your psp to 3.80M33-5, install ir shell with patch of course, and then upgrade to 3.90M33!

don't forget to copy the files from 3.80M33-5's flash0!

[swisstekk]

@diskullone
Thank you for your fast reply!

Greez

[discombobulated]

swisstekk: you have to downgrade your psp to 3.80M33-5, install ir shell with patch of course, and then upgrade to 3.90M33!

don't forget to copy the files from 3.80M33-5's flash0!


What? I just upgraded to 3.90M33 first, installed IrShell, then the patch. Simple as that for me.

[diskullone]

the patch i was talking about is btcnf patch!
the patch no firmware check had to be applied on 3.90M33, like you do! but, if you want to enabled no umd mode, net.usbhost, you have to do some tricks in 3.80M33-5.

[MIL1295]

wowwwee… certainly make my day!

thanks to ahman

I'm trying to get to play the old nintendo games in my psp 3.90 ver. but I don't know where to begin, I'm totally lost here and I'm searching for help. Can you please help me and tell me where to begin. I joined this site because of it.

I saw this guy on the train playing the old Mike Tyson punch out and ever since I've been trying to do it.

please,please,please help me.

[diskullone]

first thing: you are in the wrong place!

actually your psp is running an Ofw sony 3.90! you have to downgrade your psp with a despertar del cementerio kit V4! this kit can install Cfw 3.80 M33-5 on all psp (phat or slim)!

to make the despertar kit, ask a friend with a psp running Cfw. or try to make a kit without any other psp (hardcore but it's work!)

[KaliKot]

so i have to downgrade again to get 2 f'n files just for irshell? forget it unless people want to share or something

[JDizzlw]

I have 3.90 m33 and when I try and patch my IRShell to play ISOs through USB etc. the highest folder there is 3.80?

How do I get the 3.90 patch?

[sammiesosa#1]

Follow (Frosty's) instruction, open kd fold copy prx's from my 3.80 m33-5, upgraded to 3.90 m33, replace bin prx's in bin - no fw check (Captain Morgan), open 3.90 kd replace the two prx's to the one's from 3.80 m33.

Iso want work,config in 3xx crashes system etc. What did I do wrong or i'm not doing right.

:confused:

[diskullone]

I have 3.90 m33 and when I try and patch my IRShell to play ISOs through USB etc. the highest folder there is 3.80?

How do I get the 3.90 patch?

no patch for 3.90! do the patch for 3.80 running 3.80M33-5, copy files from flash0, upgrade...

[Coolie4]

unless you use skype dont even bother upgrading to 3.90 im still on 3.71

[diem2412]

:confused:

[maluplaya92]

does this work on the new 3.95 GEN-2

[TheRisingExodus]

I did get this working on 4.01m33-2 and it works ok but I can't get the dish network codes to work with my receiver anyway to get the code from my dish remote into a code for the IRshell cause it works for my tv perfectly just need the reciever

[carlitx]

will this work on 4.01 m33?