wraggster
February 13th, 2008, 19:03
News/release from JasonUK:
Here's version 2.0
Check the readme.txt for full instructions if you havent used this before.
Quote:
1.9 --> 2.0
- Working KL4E decompression in 3.80/3.90
- Press LEFT on the D-Pad to signcheck all ~PSP encrypted files in the ms0:/enc folder
- Totally reorganized the source code. Everything is now in one build. Internally the code is slightly different for 1.50, 2.71~3.71, and 3.80+.
` All functions are now loaded from prxdecrypter_0xg.prx (1 = 1.50, 2 = 2.71~3.71, 3 = 3.80+)
` At the moment, RLZ decompression is available in 1.50 if you put a decrypted 2.71+ sysmem_rlz.prx into ms0:/enc
` RLZ decompression is natively available in 2.71~3.71 but NOT KL4E decompression
` KL4E decompression is natively available in 3.80+ but NOT RLZ decompression (as they removed it)
` So, depending on what you want to decompress or decrypt, you may need to run it from a different firmware
` KL3E decompression is NOT yet available, so you can't properly extract the 3.80+ reboot.bin
- Made the options a little more organized with a few dividers, and changed keys to make more sense
- Press SELECT to switch between the normal output folder (which overwrites your input files) and "ms0:/dec" so the input files are kept separate from the output.
Stuff I'll add next version:
Menu system
RLZ decompression in 3.80+ (by loading 3.71 sysmem.prx) - hopefully
1.8 --> 1.9 (Bugfix release)
- Fixed bug where pressing X for too long caused it to try and decrypt multiple times resulting in a huge log of error messages
- Rewritten method of loading files for RLZ decompression in preparation for 2.0 which will have KLE decompression
- Improvements to the logfile
- Tweak to enable 1SEG.PBP decryption
- More keys added (certain apps which run in pspbtcnf_app mode)
- Fixes to prevent crash on 3.80
` NOTE: 3.80 has removed the RLZ decompression routines and replaced them with KLE. At the moment I have no information about the KL3E/KL4E NIDs and have therefore left them out of this version
` RLZ still works fine in 3.71 and below, and in 1.50 where you can load sysmem_rlz.prx to enable it as usual
Download and Give Feedback Via Comments
Here's version 2.0
Check the readme.txt for full instructions if you havent used this before.
Quote:
1.9 --> 2.0
- Working KL4E decompression in 3.80/3.90
- Press LEFT on the D-Pad to signcheck all ~PSP encrypted files in the ms0:/enc folder
- Totally reorganized the source code. Everything is now in one build. Internally the code is slightly different for 1.50, 2.71~3.71, and 3.80+.
` All functions are now loaded from prxdecrypter_0xg.prx (1 = 1.50, 2 = 2.71~3.71, 3 = 3.80+)
` At the moment, RLZ decompression is available in 1.50 if you put a decrypted 2.71+ sysmem_rlz.prx into ms0:/enc
` RLZ decompression is natively available in 2.71~3.71 but NOT KL4E decompression
` KL4E decompression is natively available in 3.80+ but NOT RLZ decompression (as they removed it)
` So, depending on what you want to decompress or decrypt, you may need to run it from a different firmware
` KL3E decompression is NOT yet available, so you can't properly extract the 3.80+ reboot.bin
- Made the options a little more organized with a few dividers, and changed keys to make more sense
- Press SELECT to switch between the normal output folder (which overwrites your input files) and "ms0:/dec" so the input files are kept separate from the output.
Stuff I'll add next version:
Menu system
RLZ decompression in 3.80+ (by loading 3.71 sysmem.prx) - hopefully
1.8 --> 1.9 (Bugfix release)
- Fixed bug where pressing X for too long caused it to try and decrypt multiple times resulting in a huge log of error messages
- Rewritten method of loading files for RLZ decompression in preparation for 2.0 which will have KLE decompression
- Improvements to the logfile
- Tweak to enable 1SEG.PBP decryption
- More keys added (certain apps which run in pspbtcnf_app mode)
- Fixes to prevent crash on 3.80
` NOTE: 3.80 has removed the RLZ decompression routines and replaced them with KLE. At the moment I have no information about the KL3E/KL4E NIDs and have therefore left them out of this version
` RLZ still works fine in 3.71 and below, and in 1.50 where you can load sysmem_rlz.prx to enable it as usual
Download and Give Feedback Via Comments