PDA

View Full Version : PSPident 0.1b (identify your PSP version info - 3.xx kernel/slim compatible)



wraggster
February 13th, 2008, 19:06
A release from a few weeks ago that i missed

heres the details from jas0nuk:


This is a 3.xx+ kernel app to display Tachyon, Baryon and Pommel version numbers of your PSP's motherboard.
It also displays the PSP model (TA-079, TA-081, etc.) based on this data.

Just copy the PSPident folder to your GAME/GAME3XX folder and run it. If you want, it will also run in the 1.50 kernel.

NOTE: If your PSP is detected as a TA-085 v2, it is the newest Slim revision which cannot write to the battery serial and therefore cannot be used to create a Pandora battery!

Information about the numbers printed:
Kernel version - internal version of the current kernel you are running the app on (could be either 1.50 or 3.xx if you're using OE/M33)
Tachyon - this seems to be the version of the chip which contains the CPU, ME and GPU.
Baryon - this is the version number of your PSP's Syscon (system control) chip
Pommel - the PSP's GPIO/watchdog which handles system events and shuts down in the event of a crash
Kirk - the PSP's main decryption/verification chip
Spock - secondary decryption chip, only used to decrypt data from the UMD discs

Note: these are internal SCE names for these devices, not names I made up xD

0.1a -> 0.1b
- Added KIRK version
- Added SPOCK version
(KIRK and SPOCK only known versions are 0010 and 0050 respectively, if you have another version, PM me)

0.1 -> 0.1a
- Added detection for "TA-079 v3" (Tachyon: 0x00200000, Baryon: 0x00040600) - I'm almost sure this is 79 rather than 81, as the tachyon which indicates a major revision has not changed. Though, who can say for sure?

~jas0nuk

Note: If it is unable to work out the motherboard model then your PSP has an unseen tachyon/baryon number. I'd appreciate if you could post the details here in that case.

Download and Give Feedback Via Comments

jackschmaltz
February 13th, 2008, 20:41
sounds good :D

turnerl
February 13th, 2008, 21:43
thanks

MicroNut
February 13th, 2008, 22:29
Cool app.

I do have a question about a strange Kirk response.

When I run PSPident in 150 I get 0010
When I run PSPident in 371 I get :)

Anyone know why?
(just curious)

sammiesosa#1
February 14th, 2008, 03:57
This is good if u don't have DA's despertar cementerio v.4 3.80 m33-5 Dark Alex upgraded from his 1.5 downgrader. new firmware installer can also give u those reading and pandorize a PSP at the same time.

egsod
April 15th, 2008, 18:24
"Unable to determine motherboard version or model by hardware info."

I use PSPident 0.1b, my firmware is the 3.90 M33-3 and my PSP is a Slim one.

Kernel version: 0x03090010

Baryon: 0x00243000

Is that normal?

hornuale000
February 5th, 2009, 22:39
my psp won't load any of the PSPIdent versions