wraggster
May 13th, 2014, 22:00
http://hackadaycom.files.wordpress.com/2014/05/backuppi.jpg?w=580&h=435
[Frank] knows how important backups are for data security, but his old method of plugging a hard drive in to take manual backups every so often is not the most reliable or secure way of backing up data. He realized he was going to need a secure, automated solution (http://wiki.villaro-dixon.eu/doku.php?id=rpi_backup_server:accueil). He didn’t need a full-sized computer with a ton of power; why waste electricity for something so simple? His solution was to use a Raspberry Pi as the backup computer.
The main problem he faced with the Pi was finding a way to make it rack mountable. [Frank] started with an empty 1U server case. He then had to bend a few metal plates in order to securely mount the backup drive into the case. A couple of small rubber pads help dampen any vibrations caused by the hard drive.
The computer power supply was able to put out the 12V needed for the hard disk, but not the 5V required to run the Pi. [Frank's] solution was to use an LM2596 based switching supply to turn the 12V into 5V. He soldered the power supply wires directly to the Pi, thinking that a USB plug might vibrate loose over time. Mounting the Pi to the computer case should have been the trickiest part but [Frank] made it easy by simply gluing the Pi’s plastic case to the inside of the computer case. When all was said in done, the backup server pulls 29W under full load, 9W with the disk spinning, and only about 2W in an idle state.
On the software side of things, [Frank's] backup box uses bash shell scripts to get the job done. The Pi connects to his main server via VPN and then the bash scripts use rsync to actually collect the files. The system not only saves backups every night, but also keeps week old backups just in case. If you are really paranoid about your backups, try hooking up a custom battery backup (http://hackaday.com/2013/11/17/battery-backup-for-raspi-keeps-your-data-safe/) solution to your Pi. If a Pi just isn’t doing it for you, you can always try one of many other methods (http://hackaday.com/2012/08/04/ask-hackaday-whats-your-backup-solution/).
http://hackaday.com/2014/05/12/rackmount-raspi-leaves-no-excuse-to-lose-data/
[Frank] knows how important backups are for data security, but his old method of plugging a hard drive in to take manual backups every so often is not the most reliable or secure way of backing up data. He realized he was going to need a secure, automated solution (http://wiki.villaro-dixon.eu/doku.php?id=rpi_backup_server:accueil). He didn’t need a full-sized computer with a ton of power; why waste electricity for something so simple? His solution was to use a Raspberry Pi as the backup computer.
The main problem he faced with the Pi was finding a way to make it rack mountable. [Frank] started with an empty 1U server case. He then had to bend a few metal plates in order to securely mount the backup drive into the case. A couple of small rubber pads help dampen any vibrations caused by the hard drive.
The computer power supply was able to put out the 12V needed for the hard disk, but not the 5V required to run the Pi. [Frank's] solution was to use an LM2596 based switching supply to turn the 12V into 5V. He soldered the power supply wires directly to the Pi, thinking that a USB plug might vibrate loose over time. Mounting the Pi to the computer case should have been the trickiest part but [Frank] made it easy by simply gluing the Pi’s plastic case to the inside of the computer case. When all was said in done, the backup server pulls 29W under full load, 9W with the disk spinning, and only about 2W in an idle state.
On the software side of things, [Frank's] backup box uses bash shell scripts to get the job done. The Pi connects to his main server via VPN and then the bash scripts use rsync to actually collect the files. The system not only saves backups every night, but also keeps week old backups just in case. If you are really paranoid about your backups, try hooking up a custom battery backup (http://hackaday.com/2013/11/17/battery-backup-for-raspi-keeps-your-data-safe/) solution to your Pi. If a Pi just isn’t doing it for you, you can always try one of many other methods (http://hackaday.com/2012/08/04/ask-hackaday-whats-your-backup-solution/).
http://hackaday.com/2014/05/12/rackmount-raspi-leaves-no-excuse-to-lose-data/