Review: XCM Cross Battle Adapter 2.0

XCM Cross Battle Adapter 2.0
Manufacturer: XCM
Site: Buy from Play-Asia / Buy from ConsoleSource / Buy from Amazon
Price: $69.99


Overview : The famous Cross Battle Adapter now comes in a new version, 2.0, with new functions to swap all your controller's functions!

The Cross Battle Adapter 2.0 is an adapter to allow you to connect your Xbox 360 wired controller to your PS3 console for use with PS3 games.

The XCM Cross Battle Adapter 2.0 is built with a new function for swapping the controller’s triggers and bumpers. You can also swap the functions of A, B, X, Y buttons (Example: Set the function of A button to the X button or set the function of B button to the Y button, etc) and swap the functions of 2 analog sticks as well! The PS3 Six Axis mode and rumble function are also supported. The best adapter in the industry just got better!

Features:

• Compatible with ALL PlayStation consoles and models.
• Requires the wired Xbox 360 controller.
• Built in Rapid Fire / Turbo for each button with independant controls.
• Easy to Use - Just Plug and Play!

Quality/Usability : This review is an update to the XCM Cross Battle Adapter. There is also a Cross Battle Adapter PLUS that supported rumble that was released after the original CBA.

Comparing the two Cross Battle Adapter, there is a big cosmetic change. The Cross Battle Adapter 2.0 comes in a purple casing with a clear purple back. The front has a big backlit LED "XCM" logo with toggle switches. Like the original CBA, the switches are for the TURBO function. Each switch is also labeled to tell you what each buttons are. For instance, the [X] button on the PS3 is the [A] button the 360. The R1 button on the PS3 is the RB on the 360.

To connect the CBA 2.0, plug the Cross Battle Adapter 2.0 into the PS3 console and the LED "XCM" logo will start flashing blue. After plugging in the Xbox 360 wired controller (yes, you must use a wired controller) and the blue LED will stop flashing and stay lit.

Cross Battle Adapter 2.0 gives you the ability to use the tilt functionality. But its not what you think. There is no motion or tilt sensitivity. Instead, if you switch the TILT button to "L" on the CBA2.0, the function of the LEFT analog stick of the 360 will now replace the PS3 controller's tilt function instead of its own function. If you switch to "R", it will take the function of the PS3's tilt function. If you dont want the tilt function at all, leave it on "N". So if you have it set on "L" or "R", you lose the original function of the analog stick.

The CBA 2.0 allows you to swap buttons. You can swap the A, B, X, Y, RB, LB, RT, LT, RC, LC, START, BACK and Directional Pad. An example is to switch the A and B button. Press the "S" button and the LED indicator will light up, then press the B button and the indicator will stop blinking. When you press the A button, the light of the LED indicator will turn off. This means the swapping procedure is complete and the B button now has the function of the A. If you want the A button to have the function of the B, simply repeat the steps above but change buttons.

To get back the original button settings, simply press the "S" button and the LED indicator will light up. Press the A button and the indicator will start to blink. Press the A button again and the light indicator will turn off.

To swap analog sticks, press the "S" button and the indicator will light up. Press any direction of the RIGHT analog stick and the indicator will turn off. To get back the original function, just repeat the steps. The easiest way to get back all the original functions is to press and hold the "S" button for 3 seconds. The LED indicator will blink quickly and all functions will be set back to their original function.


Here is a video of the Cross Battle Adapter 2.0 working on the new PS3 Slim:

With the lit XCM logo and "S" button indicator, swapping/remapping buttons and confirmation is much easier to notice. Like the Cross Battle Adapter PLUS, rumble is also available on 2.0.

Conclusion : Overall, the XCM Cross Battle Adapter 2.0 is a big improvement over the original Cross Battle Adapter (we didnt have the chance to review CBA PLUS since the only difference was that it had rumble available). However, I dont know how much of a use the tilt feature will come in handy. I didnt use it much considering I'm use to using the analog stick. For others they may prefer it. The swapping of buttons is a great addition which gives gamers the ability to configure button layouts to their liking. Unfortunately, you still need to use a wired controller. When I mean wired, I dont mean a wireless controller with the USB cable attached to it. This the only drawback to the Cross Battle Adapter 2.0.

Images via comments