Capdase Luxury Hard Case
Manufacturer: Capdase
Site: Buy from Capdase (Black) / Buy from Capdase (Silver)
Price: $25.55

Overview : Hard case to protect your PSP. Holds two Memory Stick Pro Duo's on the cover flap. Includes a leather wrist strap. Available in Black and Silver.

Features :

• Anodized aluminum case
• Soft touch rubberized back holder
• Ultra lightweight
• 360 degree free angle cover
• Direct replace UMD
• Setup stand for playing movie
• Provide the memory card slot * 2
• Approx 85g

Quality/Usability : Another case released by Capdase. Unlike the previous Capdase cases I reviewed, this is aimed more at protection wise and is user friendly. This case is similar to the Logitech PlayGear Pocket case. Besides the difference in looks wise, the Luxury Hard Case is smaller and lighter compared to the PlayGear Pocket, not to mention it has a "door" that opens to access the UMD drive as well as two slots to store your memory sticks.

Whats great about this case is that the lid can actually flip open completely so that its not at a 90 degree angle or half folded down. This can somewhat be used as a grip. The case also can be used as a stand to watch your PSP movies.

The bottom/back of the case has a rubberish feel to it but at the same time, having a hardness to it. This prevents the PSP from moving around. The Hard Case also has two little pegs that go into the holes on top of the PSP to provide an even more sturdiness. The memory stick, POWER button, USB port and UMD button are all easily accessible when in the case..even with the lid closed.

The memory stick slot themselves are a little sturdy when you place the memory stick in them. They fit well, but if the sticks arent fully in the slot, they can easily fall out with a little tap. Especially when you have the lid folded all the way.

The case comes with a black leather wrist strap.

Conclusion : Although the case looks nice and smells like brand new sneakers..there are some flaws. When the PSP is placed into the case and closed, I had a hard time trying to get the cover open. The memory stick slots was another flaw as mentioned above. But there was also the good such as the UMD door that flips down to allow the UMD tray to open as well as easy access to the memory stick port and all other buttons without having to take out the PSP. Its a bit pricey for this case compared to the Logitech PlayGear Pocket which retails for $19.99.

Images via comments ...

Intec Recharging Dock w/USB Charge Cable
Manufacturer: Intec
Site: Buy from Intec
Price: $9.99

Overview : Display and charge your PSP with Intec’s Recharging Dock Station! Place your PSP in the cradle and maximize your gaming time by charging your PSP and your extra battery simultaneously. This charging station keeps your handheld system secure on your desk or night table. This cradle is also perfect for desktop gaming, allowing you to sit the unit on your desk while you play or watch movies! Designed & styled for the PSP handheld.

Cradle charges your PSP and has en extra compartment to charge an additional PSP battery!

Features :

• Charges battery and PSP when not in use
• Transfer data from PC to PSP using USB cable (included)
• Charge PSP and battery without the use of the dock
• Blue LED light indicates charging
• 3 inch x 1 1/2 inch (W x D)

Quality/Usability : The recharging dock is molded specifically to hold the PSP along the bottom of the device. The recharging dock measures approximately three-inches wide and one and a half inch deep. The base of the Recharging Dock also has four rubber grip pads to prevent the dock from sliding. There is a support bracket on the back of the dock holds the PSP up. The clear plastic centerpiece also illuminates to blue when the Recharging Dock is being powered and charged.

The recharging dock recharges the battery in your PSP when the system is not in use. You can also power the PSP when you have it placed on to the dock. The power port is located on the back of the dock.

While the PSP is charging on the dock, you can also transfer data from your PC to the PSP without worrying about the PSP dying on you. This is great considering one cable does both the transfering of data and charging the PSP.

Conclusion : The dock does a great job of displaying movies, is that what its suppose to do? HEHE. It would of been nice if it gave us the ability to adjust the angle. The dock itself is not portable-friendly due to the size, so you'll need a backpack or something to carry it. The most useful thing is that the cable has a mini-B USB cable as well as a recharging cable at the end. Without the dock, you can still transfer data and charge the PSP if you are near a computer or if you have a laptop with you. For the price alone, its worth it just for the cable. To me, the dock is an added bonus.

Images via comments ...

Intec Sound System
Manufacturer: Intec
Site: Buy from Intec
Price: $29.99

Overview : Maximize the sound of your PSP with Intec’s PSP Sound System! This sound system features stereo speakers with adjustable angle for a better gaming experience. Designed & styled for the PSP handheld. Use the PSP’s existing AC power adapter to power the sound system and the PSP, or power it up with 3AA batteries while on the go!

PSP slips into sound system for a secure fit

Charge your PSP while you watcha movie in full stereo sound, or listen to your favorite music!

Power it up with your existing PSP AC adaptor, or use 3 AA batteries when on the go!

Features :

• Folds flat for easy storage
• Operates on AC power (from PSP charger) or 3 AA batteries (not included)
• 3.5-watt per channel bass and tweeter combination stereo speakers
• Headphone jack
• Docking station for PSP recharging
• Drawstring back to carry speakers and PSP system

Control features :

• Green LED power indicator
• Volume up/down
• Power on/off

Quality/Usability : The speakers come out looking flat out of the packaging. In order for it to actually stand, you'll have to turn the base around for it to takes its shape as a stand. On the base itself, there is a door which is the compartment for where you insert 3 AA batteries. Also included are 2 small screws. These screws, one being a spare incase you lost the first screw, will help keep the battery door closed.

Once the stand is in its upright position, the front of the base you will find the usual buttons such as the power button, a power indicator light, a button to increase and decrease the volume and a earphone jack so you can listen to your music and movies without disturbing those around you.

By looking at the speakers, the inner part of the speakers is curved and is designed to hug around the PSP. To install, you simply slide the PSP into the plugs that are on the speakers. If you have a wrist strap, you may need a little extra force to push in the left side (directional pad side). If the PSP is not fully in (connecting to the headphone jack), the sound system will not power on.

The speakers themselves are very loud. I set the PSP's volume to the max as well as the sound speakers and there wasnt alot of distortion. The sound was very clear. Only problem is the volume button. I had to press it a couple of times before you actually noticed the volume either got louder or lower.

Conclusion : Intec really spent their time making this portable. Especially the weight. Its so light. When I first opened the package and held the sound system in my hand, I thought to myself, this thing is so cheap because its so light. But its really not. The weight may fool you but the sound wont. The sound system is truly portable.

The sound system’s base comes with four rubber feet to prevent the sound system from sliding. There are six rubber feets as well (three on each side) to prevent the sound system from sliding when it is not in use. The option of using three AA batteries or a power adapter to power the sound system is also a nice option to have.

Like all sound systems, the audio will not be like your home theather system or DVD quality but for something so portable, its pretty good quality compared to the PSP's built in speaker. Compared to the Logic3 2.1 Sound System, this is a steal. $29.99 vs $79.99? But the Logic3 does have features the Intec doesnt. But if you're looking for a portable sound system for a decent price, I suggest taking a look at the Intec Sound System.

The bottom picture is pretty much how the design will look. The final product has the same base which has the on/off switch, volume up/down, headphone jack, etc. The only different is that the speakers arent as curved and as big.

The design below is an illustration of the product from Intec. The final product looks similar but not exactly the same. I will update pictures when they are available.

Images via comments ...

be.ez LArobe PSP
Manufacturer: be.ez
Site: Buy from be.ez
Price: £14.95 inc VAT (no US pricing yet)

Overview : LArobe PSP is made in a soft, shape-memory material, ideal to dress your PSP™ in an original fashion while protecting it from mobile life worries.

Features :

• Low Resilience Polyurethane (LRPu) Technology
• Robe protection Thickness 5MM
• Trendy, Unique Design
• Inner Lip for maximum protection
• Stand alone or in your bag
• No more Scratchs for your PSP™

Quality/Usability : The LArobe PSP is a new pocket sized sleeve that closes with a zipped finish similar to a jewelery case, offering protection, originality and quality. The LArobe PSP was designed to efficiently protect the PSP without diminishing its original styling, providing a credible alternative to other monotone looking protective cases. The LArobe PSP is made of a soft, shape-memory material, ideal to fashionably dress your PSP in a 'couture' style while protecting it from day to day wear and tear. There isnt any room or any extra pockets to store memory sticks or UMD games. Once you place the PSP into the pouch, it will be a tight fit. The PSP wont be moving around.

The LArobe PSP uses low resilience polyurethane (LRPu) technology and offers robe protection thickness with an inner lip for maximum protection. The cases come in a variety of colours from bright pink to turquoise blue, apple green or black, providing a different and attractive product range.


Conclusion : This is a great alternative to the stock PSP black pouch. With the added zipper, this is even more secure because you dont have to worry about the PSP falling out. Too bad there isnt a small pouch on the back to hold any UMDs or memory sticks. Not to mention a belt clip, belt loop or carabiner for easy portablility.

Images via comments ...

Universal Windshield Holder (360° degree Rotatable)
Maker: Unknown
Site : Buy from Brando
Price: $12.00

Overview : This item holds your Cellphone, PDA, PSP, MP3 player and any other electronic devices it can hold. You can stick this onto the windshield of you car and view movies or listen to music from your PSP with ease. There are other windshield holders out there but none really rotate at 360°.

* viewing of PSP while driving is not condoned by DCEmu and is not held liable for any accidents. Use at your own risk.

Features :

• New design, good outlook
• No tools required - easy to install
• Convenient, reliable and easy to use
• Flexible pedestal shaft adjusts quickly
• Suitable for cellular phones and PDAs

Specification :

• 360° Rotatable
• Adjustable stroboscope mount width: 52-80mm
• Flexible arm (165mm)
• Suction pad with lock knob

Package Contents :

• One stroboscope mount
• One flexible arm
• Two vent pothook

Quality/Usability : When I first got the item, the packaging was in a regular cardboard box, not the usual blister plastic packs. Upon opening the item, the two vent packs are in a small ziplock type bag, the flexible arm was wrapped in bubblewrap and the mount was just in the box. But the overall quality of the item is sturdy and solid. The neck itself is about 9 inches long and the mount itself is about 4 inches tall and 3 inches wide with the side 'arms' closed. With the side 'arms' spread open, its about 4 1/2 inches side. The side 'arms' of the mount spreads open with a click of a button on the side. The bottom 'legs' of the mount open up also for those bigger devices but require manual opening. The top 'head' moves up to accomodate those longer devices for more support. With the side 'arms' open completely, there is more than enough room to slide the PSP into. The 360 degree rotating idea is great for those who have a PSP, PDA, MP3 player, etc. and can rotate the holder to accomdate to whatever device they are using without having to have different holders in the car.

Installation : Once everything was taken out, installation was pretty easy.

Windshield:

• Set main unit in foot-rest (clip with neck)
• Remove protection paper from the bottom of suction cup
• Place suction cup of foot-rest direct towards windshield and press then lock device on
• Place the holder onto top of dashboard for addiction support

Vent:

• Set the pothook in main unit an dput them on the correct position
• Set the device in vent

Considering this is made from Asia, the english of the instructions were a little weird, so I reworded it. Its easy as putting legos together without even having to read the instructions.

Conclusion : I have another windshield mount that I purchased on eBay that I use. Unfortunately, that one required some modificiation (cutting down on rubber and plastic). With this, there is more than enough room to fit the PSP without any modifications done to it. Just spread the side 'arms' open, slip your PSP into position and squeeze the side 'arms' closed to secure the PSP in place. I dont like the idea of the item being on the vent considering the weight of the PSP can damage your vents and it blocks off the vent when it is in use, especially a hot and humid summer.

What I like about this is the amount of room to fit your device, the sturdiness of the product and the ability to rotate it 360°. The price of the item is affordable and reasonable. I paid more for the one I ordered on eBay .

But use this at your own risk and safety. Watching PSP movies while driving can cause accidents. Also, viewing of items on your windshield blocks your view and distracts you so this is illegal in some states.

Images via comments ...

Universal Windshield Holder (360° degree Rotatable)
Maker: Unknown
Site : Buy from Brando
Price: $12.00

Overview : This item holds your Cellphone, PDA, PSP, MP3 player and any other electronic devices it can hold. You can stick this onto the windshield of you car and view movies or listen to music from your PSP with ease. There are other windshield holders out there but none really rotate at 360°.

* viewing of PSP while driving is not condoned by DCEmu and is not held liable for any accidents. Use at your own risk.

Features :

• New design, good outlook
• No tools required - easy to install
• Convenient, reliable and easy to use
• Flexible pedestal shaft adjusts quickly
• Suitable for cellular phones and PDAs

Specification :

• 360° Rotatable
• Adjustable stroboscope mount width: 52-80mm
• Flexible arm (165mm)
• Suction pad with lock knob

Package Contents :

• One stroboscope mount
• One flexible arm
• Two vent pothook

Quality/Usability : When I first got the item, the packaging was in a regular cardboard box, not the usual blister plastic packs. Upon opening the item, the two vent packs are in a small ziplock type bag, the flexible arm was wrapped in bubblewrap and the mount was just in the box. But the overall quality of the item is sturdy and solid. The neck itself is about 9 inches long and the mount itself is about 4 inches tall and 3 inches wide with the side 'arms' closed. With the side 'arms' spread open, its about 4 1/2 inches side. The side 'arms' of the mount spreads open with a click of a button on the side. The bottom 'legs' of the mount open up also for those bigger devices but require manual opening. The top 'head' moves up to accomodate those longer devices for more support. With the side 'arms' open completely, there is more than enough room to slide the PSP into. The 360 degree rotating idea is great for those who have a PSP, PDA, MP3 player, etc. and can rotate the holder to accomdate to whatever device they are using without having to have different holders in the car.

Installation : Once everything was taken out, installation was pretty easy.

Windshield:

• Set main unit in foot-rest (clip with neck)
• Remove protection paper from the bottom of suction cup
• Place suction cup of foot-rest direct towards windshield and press then lock device on
• Place the holder onto top of dashboard for addiction support

Vent:

• Set the pothook in main unit an dput them on the correct position
• Set the device in vent

Considering this is made from Asia, the english of the instructions were a little weird, so I reworded it. Its easy as putting legos together without even having to read the instructions.

Conclusion : I have another windshield mount that I purchased on eBay that I use. Unfortunately, that one required some modificiation (cutting down on rubber and plastic). With this, there is more than enough room to fit the PSP without any modifications done to it. Just spread the side 'arms' open, slip your PSP into position and squeeze the side 'arms' closed to secure the PSP in place. I dont like the idea of the item being on the vent considering the weight of the PSP can damage your vents and it blocks off the vent when it is in use, especially a hot and humid summer.

What I like about this is the amount of room to fit your device, the sturdiness of the product and the ability to rotate it 360°. The price of the item is affordable and reasonable. I paid more for the one I ordered on eBay .

But use this at your own risk and safety. Watching PSP movies while driving can cause accidents. Also, viewing of items on your windshield blocks your view and distracts you so this is illegal in some states.

Images via comments ...

Capdase AUMI Professional UMD Lens Guard
Manufacturer: Capdase
Site: Buy from Capdase
Price: $4.99

Overview : Protects UMDs from scratching, scraping and abrasion.

Features :

• Against scratching, scraping & abrasion.
• Protects the front & back from fingerprints.
• Removable without leaving residuary mark.

Quality/Usability : This is a great product for those who are anal or scared of damaging their expensive UMD movies or games. These clear stickers will protect the clear part of the UMD from scratches, abrasions even fingerprints. Each package contains (1) front and (1) back.

Applying this would be the same way you would apply a screen protector onto your PSP.

Conclusion : Unfortunately, its very expensive. It only comes with (1) front and (1) back. If it was reusable, it would be better. ...

Logic3 External Rechargeable Battery
Manufacturer: Logic3
Site: Buy from Logic3
Price: £12.99

Overview : The PSP527 battery pack connects externally to the PSP console and packs 1800mAh of extra power for your PSP console. Allows an additional 3 hour operation time.

Features :

• External rechargeable battery
• 1800mAh Li-ion Battery
• Recharges using standard PSP AC Adaptor
• Recharges in 4 hours
• When connected to PSP acts like AC adaptor
• Weight: 100g

Quality/Usability : The PSP External Rechargeable Battery pack is light weight and small in size. The pack is approximately 3 inches long and ~1 inch thick. To charge the battery pack, just plug the original AC adaptor that came with your PSP to charge the battery pack. When the AC adaptor is plugged into the battery pack, a red LED is lit to show that it is being charged. When it is done charging, the LED turns green.

On the other end of the pack is the plug that goes into the PSP as well as an ON/OFF switch. The cable that plugs into the PSP DC port is approximately 18 inches long.

The battery pack gives the PSP an additional three hours of play, according to press release. But I got a little less than 3 hours. But I assume like any rechargeable battery pack, the more you recondition the battery pack (recharge), the higher the operation time. Even if you’re not using it to extend battery life during gameplay, you can use the pack to charge your PSP while it is off.

Conclusion : Overall, the PSP External Rechargeable Battery Pack is a nice product that lets you extend the battery life for your PSP. Although it takes about 4 hours to charge the pack, it’s well worth it at the end when it saves your PSP from dying and leaving you bored. It would have been nice if there was a case or a way to keep it near the PSP. It would be awkward to have the pack dangling if you were to walk or stand up with your PSP. A nice addition is the ON/OFF switch. This will save lots of juice when the pack is not in use.

Images via comments ...

Datel PSP Communicator Headset
Manufacturer: Datel
Site: Buy from Divineo UK
Price: $14.99

Overview : With its comfortable, over-the-ear design and snazzy hi-tech look, Communicator Headset for PSP is an essential purchase for gamers on the move. It’s fully WiFi-compatible too; the ideal companion for Datel’s own WiFi MAX.

Communicator Headset works with any PSP game with voice chat. With a microphone positioned near your mouth and an earpiece for crystal-clear sound, Communicator Headset lets you bark out your orders or taunt your opponents as you play.

Take Sony’s brilliant SOCOM: US Navy Seals Fireteam Bravo. During online play, it’s essential that you communicate with the rest of your squad. Plan your strategies, warn your comrades in arms of impending danger and make sure everyone is doing the job they’re meant to be doing. With Communicator Headset, you can hear every word your buddies utter, and your own instructions are never lost in the heat of battle.

With more and more Sony PSP games making use of microphone communication, and for those inevitable occasions where listening to the in-game sounds is the only option, Communicator Headset is the ideal choice.

Features :

• Perfect for games with Talk or voice control features
• Talk Over the Net with Socom 3
• Take control of your PSP
• Comfortable over-ear design
• Talk
• Strategize
• Control

Quality/Usability : What you say? This looks familiar? Well it should. Datel also released Communicator Headsets for the XBOX360 and Nintendo DS. Only difference of course is the plugs and packaging color (lime green and red respectively).

From the pictures, you would think it’s small. But when you receive, the packaging and headset itself are pretty big. Not big as in huge but big as in almost the length of your PSP. Yes, the length of your PSP. I guess you can say it’s similar to your PC microphone headphones just minus the piece that goes over your head.

On the box of the headset (as well as listed in the Feature above), it states SOCOM 3. SOCOM 3 doesn’t exist but yet they mention it a couple of times. I assume its just a typo when they really mean SOCOM: US Navy Seals Fireteam Bravo. The headset can be used for any game to allows the use of a headset. Talkman is another good example unfortunately, the list of games that uses the microphone is very very slim.

The headphones are pretty sturdy. On the earphone itself, is a small clip that loops around your ear. If you own or have seen some SONY Street style headphones, this is similar. The headphone fits on your left ear. You’re unable to switch the clip like you would do with a Bluetooth headphone. If you’re the type of person to wear them on your right ear, you’ll be disappointed and probably feel uncomfortable. The microphone doesn’t stick out all the way (approx. 3.5”) but is long enough for the other person on the other end to hear you. The length of the wire itself is long enough that you can move around freely and not too long where you have to drag it.

Since the packaging mentions SOCOM and it is the only game I own that uses the microphone headset, I used it for the testing purposes. Any sound from the game is sent directly to the speaker on the headphones. The sound is clear and not distorted. There were a few occasions where the other person started to break up but it’s probably due to lag in the WIFI connection. The microphone itself is pretty good for the most part and minimized any background noise. There were a few times where I had to talk a little louder but not to the point where I had to scream out loud. The person on the other end was able to hear me loud and clear. There were also a few occasions where they couldn’t hear me...again, probably due to lag in the WIFI connection. Just using the headset as headphones for UMD movies or games, faired pretty well. Again, there wasn’t any distortion and was pretty clear.

Conclusion : Overall, the Communicator Headset does what it is suppose to do. But with the lack of support for the use of microphone, there’s not much use for this. The microphone could be a little better when picking up voices. There are minimal complaints but the bigger flaw in my book is the inability to use the headphones on your right ear. Datel can easily fix this problem by making it detachable (see Bluetooth headphones). As new games with online features come out, hopefully they will support microphone support. If not, hopefully SONY can pull a rabbit out of the hat and have VoIP (Voice Over IP), cellphone or something along the lines that utilizes the Communicator Headset. Not only is this a great product, its affordable as well.

Images via comments ...